Connecting Dti-520 - Wacom DTI-520 User Manual

Connecting DTI-520
1
Turn off both your computer and the product.
2
Connect the Analog-RGB connector to your computer's display port.
3
Connect the power adapter to the power cable and connect the DC power connector to the
DC power input terminal. Next, plug the power cable into your electrical outlet.
Be sure to also connect a ground wire.
4
Turn on the product's power switch.
The power indicator lamp will light up orange.
5
Turn on your computer.
Important
6
While looking at the LCD screen, configure the color resolution and size settings.
7
Turn off your computer.
Caution
8
Connect the product to your computer using either a USB cable or a serial cable, depending
on which is appropriate for your computer.
For Macintosh, use a USB cable connection.
9
Turn on your computer.
10
Install the tablet driver (Please refer to "Installing the Tablet Driver" on page 12).
Caution
0
UM-0314(A)_EN.indd 10
- Do not modify the refresh rate. Setting the rate to a value that exceeds the DTI-520
refresh rate may result in loss of picture.
- The color palette settings and corresponding number of colors displayed are as
follows:
High Color (16 bit) → 65,536 colors / True Color (24 bit) → Roughly 16.2 million colors
*The number of colors is limited by the efficiency of your computer and video card.
For details, refer to the user's manual provided by the manufacturers.
When using the tablet with a serial cable connection, the product's USB hub
function cannot be utilized.
Please separate the DTI-520 from other tablets or similar devices. Electrical
interference may affect operational quality of the DTI-520.
2007/11/12 16:53:14