Synchronizing The Positions Of The Pen Tip And Pointer - Wacom DTI-520UB User Manual

Synchronizing the Positions of the Pen Tip and Pointer

Make the necessary adjustments so that when the pen nib is brought near the LCD screen, the
pointer displays properly in the area where the pen nib is placed (parallactic adjusting).
* When using an analog RGB input type of LCD pen tablet, please refer to "Protrusion of the Screen
from the LCD Panel and the Blurring of Characters" on page 15 and make any necessary adjustments
to the screen.
* When using multiple tablets, see page 23.
1
Click on Calibrate... and the screen used for
making adjustments will appear.
2
Click in the middle of the cross
mark in the upper left-hand corner
of the screen while sitting in your
normal seating position with the pen
nib and the cross mark will move to
the bottom right-hand side of the
screen.
3
Click again in the middle of the
c ro s s m a r k t h a t i s n o w i n t h e
bottom right-hand corner of the
screen while sitting in your normal
seating position and the cross
mark will disappear. The process of
synchronizing positions is now complete.
Click on the OK button in the lower part
22
of the screen to close the screen.