Using The Control Panel; Displaying The Control Panel; Control Panel Basics - Wacom DTI-520 User Manual

Using the Control Panel
Change the settings for the pen and adjust the pointer and pen tip positions with the control panel.
*When connecting and using multiple tablets, see page 24.

Displaying the Control Panel

Opening the Control Panel in Windows
Click on the Windows Start button, go to All Programs (P) or Programs (P), open Pen Tablet and
select Pen Tablet Properties.
Opening the Control Panel in Macintosh
Open System Settings and then Pen Tablet.

Control Panel Basics

You select the pen tab.
NO Setting Item
1 The second side switch and
the side switch
2 Tip Feel
3 Double Click Distance
4 Click Sound
5 Default
6 Advanced
0
UM-0314(A)_EN.indd 20
1
2
3
Selects the side switch button functions for pens equipped
with a side switch. See page 21-22.
Customizes the amount of pressure needed to click or draw
with the pen.
Adjusts the size of the double-click area. See page 21.
When checked, an audible "click" sound will be heard
whenever a pen click occurs and your computer speakers are
turned on.
Returns the PEN tab settings to their factory defaults.
When the Side Switch is set to right click or other click
functions, select one of the following two modes of operation.
・Hover Click: allows you to perform click functions by
pressing the Side Switch when the pen tip is raised slightly
above the active surface.
・Click & Taps: press the Side Switch and then lightly press
the pen tip against the active surface. This is the default
setting for tablet PCs.
4
5
6
Description
2007/11/12 16:53:18