Synchronizing The Positions Of The Pen Tip And Pointer - Wacom DTF-521 User Manual

Synchronizing the Positions of the Pen Tip and Pointer

Make the necessary adjustments so that when the pen nib is brought near the LCD screen, the
pointer displays properly in the area where the pen nib is placed (parallactic adjusting).
* When using an analog RGB input type of LCD pen tablet, please refer to "Protrusion of the Screen
from the LCD Panel and the Blurring of Characters" on page 15 and make any necessary adjustments
to the screen.
* When using multiple tablets, see page 24.
1
Click on Calibrate... and the screen used for
making adjustments will appear.
2
Click in the middle of the cross mark in the
upper left-hand corner of the screen while
sitting in your normal seating position with the
pen nib and the cross mark will move to the
bottom right-hand side of the screen.
3
Click again in the middle of the cross
mark that is now in the bottom right-
hand corner of the screen while sitting
in your normal seating position and the
cross mark will disappear. The process
of synchronizing positions is now
complete.
Click on the OK button in the lower part
of the screen to close the screen.
23