Static Ip - D-Link DAP-1513 User Manual

Section 3 - Configuration
Select Static IP Address if all the Internet port's IP information is provided to you by your ISP. You will need to enter in the IP
address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields
must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The MediaBridge® will not accept the IP
address if it is not in this format.
LAN Connection Type: Select Static IP from the drop-down menu.
IP Address:
Enter the IP address of the MediaBridge®.
The default IP address is 192.168.0.50. If you
change the IP address, once you click Apply,
you will need to enter the new IP address in
your browser to get back into the configuration
utility.
Subnet Mask:
Enter in the Subnet Mask.
Default Gateway:
Enter the Gateway.
Device Name:
Enter the Device Name of the DAP-1513. It is
recommended to change the Device Name if
there is more than one D-Link device within the
subnet. Y ou can enter the device name of the AP
into your web browser to access the instead of
IP address for configuration. If you are using the
device name to connect, ensure that your PC
and your DAP-1513 are on the same network.
D-Link DAP-1513 User Manual

Static IP

21