Manual Configuration; Wireless Setup - D-Link DAP-1513 User Manual

Section 3 - Configuration
Wireless Mode:
Bridge Mode only.
Site Survey:
Click Site Survey to display a list of wireless networks
in your area. You may select the wireless router or
access point to connect to.
Wireless Network
Enter the SSID of the access point or wireless router
Name:
you want to connect to. If you do not know for sure,
click Site Survey and select it from the list, if available.
Wireless Channel:
The channel will automatically change to the channel
of the AP you are connected to.
802.11 Mode:
Select the appropriate 802.11 mode based on the
wireless clients in your network. The drop-down
menu options are 802.11g Only, Mixed 802.11b/g,
802.11b Only, 802.11n Only, or Mixed 802.11b/g/n.
Channel Width:
Select the appropriate channel width between
20MHz or Auto 20/40MHz from the drop-down
Wireless MAC Clone:
menu.
Wireless Security
You can clone the wireless MAC address to connect
Mode: the device.
WPS:
Select a wireless security setting. Options are None,
WEP, WPA, or WPA2. See the Wireless Security
section in this manual for a detailed explanation of
the wireless security options.
Select enable if you want to configure the DAP-1513
with Wi-Fi Protection setup.
D-Link DAP-1513 User Manual

Manual Configuration

Wireless Setup

19