D-Link DAP-1533 Quick Install Manual

Quick Install Guide
Wireless N450 MediaBridge®/Access Point
Start Here
1
Which Mode Should I Use?
Access Point Mode - Upgrade your wireless connection
Use Access Point mode if you want to connect wireless devices such as laptops, tablets, smartphones, and media players
to your wired network (via router or switch). Use this mode to upgrade your wireless network to the latest wireless
technology and boost performance and coverage.
Installation Tip:
If you already have a WPS-ready wireless router or access point, you can use the One Touch AP Configuration to copy
your existing wireless settings to the DAP-1533. You can then disable the wireless function in your existing wireless router
or AP to avoid wireless interference. If you do not have an existing wireless router or AP with WPS, use Manual Setup.
Router
Internet
Access Point Mode - Upgrade your wireless connection
2 3
RESET 1 2 LAN 3 4
ON/OFF DAP-1533
1 2 LAN 3 4 INTERNET USB
12V - - - 2A
DAP-1533
With the DAP-1533 powered Attach the power adapter to a
off, slide the selector on the power outlet or surge protector.
back of the device to If the Power LED is not lit, press
AP 2.4GHz or AP 5GHz.
the Power button to turn on.
MediaBridge Mode - Connect media devices to your wireless network
®
2 3
RESET
1 2 LAN 3 4
ON/OFF
1 2 LAN 3 4 INTERNET USB 12V - - - 2A DAP-1533
DAP-1533
With the DAP-1533 powered Attach the power adapter to a
off, slide the selector on the power outlet or surge protector.
back of the device to BRIDGE. If the Power LED is not lit, press
the Power button to turn on.
Manual Setup (All Modes)
2 3
RESET
1 2 LAN 3 4
ON/OFF
1 2 LAN 3 4 INTERNET USB 12V - - - 2A DAP-1533
DAP-1533
With the DAP-1533 powered Attach the power adapter to a
off, select the mode you want power outlet or surge protector.
to use by sliding the selector If the Power LED is not lit, press
on the back of the device. the Power button to turn on.
Technical Support
U.S. and Canadian customers can contact D-Link technical support through our web site or by
phone. You can find software updates and user documentation on the D-Link website as well
as frequently asked questions and answers to technical issues.
Before you contact technical support, please have the following ready:
• Model number of the product (e.g. DAP-1533)
• Hardware Revision (located on the label on the bottom of the product (e.g. rev A1))
• Serial Number (s/n number located on the label on the bottom of the product).
Smartphone
RESET
ON/OFF
1 2 LAN 3 4 INTERNET USB
12V - - - 2A
DAP-1533
Laptop
4
RESET
ON/OFF
INTERNET USB 12V - - - 2A
Press the WPS button on your existing wireless router
or access point.
4
RESET
ON/OFF
INTERNET USB 12V - - - 2A
Press the WPS button on your existing wireless router
or access point. The WPS LED will start to blink.
4
RESET
ON/OFF
INTERNET USB 12V - - - 2A
1 2 LAN 3 4
Laptop DAP-1533
Connect the DAP-1533 to your computer
with an Ethernet cable.
Package Contents
DAP-1533 Wireless N450
MediaBridge®/Access Point
Ethernet Cable
Power Adapter
CD-ROM with Manual
If any of the above items are missing, please contact your reseller.
DAP-1533
MediaBridge
Use MediaBridge mode if you want to connect Ethernet wired devices such as computers, game consoles,
Network Storage (NAS) devices, and media players to your existing wireless network. With the DAP-1533 you can
connect up to 4 devices to your wireless network. Note that wireless devices cannot connect to the DAP-1533
OR
wirelessly when in MediaBridge mode.
Installation Tip:
If you already have a WPS-ready wireless router or access point, you can use the WPS Setup to automatically
configure and connect to your wireless network by simply pressing a button. If not, use Manual Setup.
5
WPS Button
DAP-1533
For One Touch Configuration, press
and hold the WPS button on the
DAP-1533 for about 5 seconds.
The Wireless LED will blink.
5
WPS Button
DAP-1533
For WPS Setup, press and hold the WPS
button on the DAP-1533 for about 1
second. The WPS LED will blink.
5
RESET
ON/OFF
INTERNET USB 12V - - - 2A
Next, open a web browser and
enter http://dlinkap in the
address field.
United States
Telephone: (877) 453-5465
Internet: http://support.dlink.com
Canada
Telephone: (800) 361-5265
Internet: http://support.dlink.ca
LEDs (from top to bottom)
Wireless LED (AccessPoint Mode) - A solid
green light will indicate that Access Point Mode
is on.
Wireless LED (MediaBridge
green light will indicate that Media Bridge Mode
is on.
Power LED/Button - A solid light indicates a
proper connection to the power supply. Press
the button to turn the power on and off.
Mode - Connect media devices to your wireless network
®
Router
1 2
Gaming
Console
Digital
Internet
Media
Player
6
WPS Button
Router
1 2 LAN 3
DAP-1533
DAP-1533
Internet
Once finished, you must connect an Ethernet cable from the DAP-1533 to
the LAN port on your router.
6
Existing Network
WPS Button
Router
DAP-1533
Once finished, you may connect up to 4 Ethernet (wired) devices to
the DAP-1533 and connect to your existing wireless network. Note
that wireless devices cannot connect to the DAP-1533 wirelessly when in
MediaBridge mode.
6
Select Admin for the user name and leave Click Launch Wireless Setup Wizard and
the password blank. Click Log In. follow the on-screen instructions to quickly
configure your DAP-1533.
©2011 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered
trademarks of D-Link Corporation or its subsidiaries in the United States and/or other countries. Other
trademarks or registered trademarks are the property of their respective owners.
Maximum wireless signal rate derived from IEEE Standard 802.11g, 802.11a and 802.11n specifications.
Actual data throughput will vary. Network conditions and environmental factors, including volume of
network traffic, building materials and construction, and network overhead, lower actual data throughput
rate. Environmental conditions will adversely affect wireless signal range.
Product specifications, size and shape are subject to change without notice, and actual product appearance
may differ from that depicted on the package. Visit dlink.com (US) or dlink.ca (Canada) for more details.
Mode) - A solid
®
RESET
ON/OFF
LAN 3 4 INTERNET USB 12V - - - 2A
DAP-1533
Network
TV Viewer
Network
DVR
Smartphone
RESET
ON/OFF
4 INTERNET USB 12V - - - 2A
Laptop
RESET
ON/OFF
1 2 LAN 3 4 INTERNET USB 12V - - - 2A
DAP-1533
Network
TV Viewer
Gaming
Console
Digital
Network
Media
DVR
Player
7
Version 1.1 (November 1, 2011)