Assigning A Static Ip Address In Windows ® Xp/2000 - D-Link DWL-2700AP User Manual

DWL-700AP User's Manual
Assigning a Static IP Address in Windows
Note: DHCP enabled routers will automatically assign IP addresses to the computers
on the network, using DHCP (Dynamic Host Configuration Protocol) technology. If you
are using a DHCP capable router you will not need to assign static IP addresses.
If you are not using a DHCP capable router, or you need to assign a static IP address,
please follow these instructions:
Go to Start.

 Double-click on Control Panel.
 Double-click on Network Connections.
D-Link Systems, Inc.
Networking Basics
XP/2000
®
10