System - D-Link DAP-1513 User Manual

Section 3 - Configuration
Save to Local Use this option to save the current MediaBridge®
Hard Drive: configuration settings to a file on the hard disk of the
computer you are using. Click the Save button. You will
then see a file dialog where you can select a location
and file name for the settings.
Upload from Use this option to load previously saved MediaBridge®
configuration settings. Click Browse to find a
Local Hard Drive:
previously saved configuration file. Then, click the
Upload Settings button to transfer those settings to
the MediaBridge®.
Restore to
This option will restore all configuration settings
Factory Default:
back to the settings that were in effect at the time
the MediaBridge® was shipped from the factory. Any
settings that have not been saved will be lost, including
any rules that you have created. If you want to save the
current MediaBridge® configuration settings, use the
Save button above.
Note: Restoring the factory default settings will not reset
the Wi-Fi Protected Status to Not Configured.
Reboot the Click to reboot the DAP-1513.
Device:
D-Link DAP-1513 User Manual

System

24