Function Switches - Pioneer CLD-V2400 Programmer's Reference Manual
Laser disc/compact disc player
Hide thumbs
Also See for CLD-V2400:
- Product information bulletin (2 pages) ,
- Product information (1 page) ,
- Technical bulletin (4 pages)
Table of Contents
Advertisement
2.4 Function Switches
The CLD-V2600 videodisc player has four physical dip-switches, #1-4, on the rear
panel of the player and the CLD-V2400 has two, #1 & 2. (See diagram below.)
These are used to set several function parameters after the power is turned on.
All switches are UP (OFF) when the players are shipped from the factory. The
factory defaults are as follows: Switch 1: Power On/Load Start is OFF; Switch 2:
BAUD rate is 4800; Switch 3: SQUELCH is BLUE; Switch 4: Not Used.
4
3
Player
Switch #
2600 & 2400
2600 & 2400
CLD-V2600 only
CLD-V2600 only
Figure 2-P
Sw.1:
With this switch ON, playback begins automatically when the disc table is
inserted or when the power is turned ON with the disc previously loaded. This
switch is set to OFF/UP at the factory.
Sw.2:
The serial communication speed (BAUD rate) can be set to either 1200 or
4800. With this switch ON the speed is 1200 BAUD and with the switch OFF, the
speed is 4800. The factory set value is 4800 BAUD (OFF/UP).
Sw.3:
The background color or "squelch" on the monitor can be set to BLUE or
BLACK. This switch is set OFF/UP at the factory, providing a BLUE Squelch.
Sw.4
Not used.
NOTE: These settings can be modified by entering data into Register C from a
computer via the RS-232C port. (See Section 4.7.6 Register Control Commands,
Register C Set, page 4-43.) Settings for Switch 1, Load Start, Power-On Start
and Switch 2, BAUD Rate, and Switch 3 Background Color can be modified in
Register C.
CLD-V2600 / 2400 Level I & III User's Manual
CLD-V2600 / 2400 Level I & III • Chapter Two
Function Switch Settings
2
1
Function
Sw 1
Load Start
Power-On Start
Sw 2
BAUD Rate
Sw 3
Background Color
Sw 4
Not Used
Switches 1 & 2 are available on both the CLD-V2600
and the CLD-V2400. Switches 3 and 4 are only
available on the CLD-V2600. To initialize the player
with new settings, power down and then power on
the player again.
On (Down)
Off (Up)
Auto
1200
Black
TP 117
v. 2.0 • 12/93
Factory Setting
Off
Off
4800
4800
Blue
Blue
2-13
Hide quick links:
Advertisement
Table of Contents
