Pioneer CLD-V2400 Programmer's Reference Manual page 48

CU-V113 / RU-V103 Remote Control:
LEVEL I CONTROL
REJECT:
Ceases playback and spins-down the disc.
PAUSE:
Ceases playback and displays a squelch screen.
Press any motion button to resume.
PLAY:
Begins playing a disc, or resumes play.
REPEAT MODE:
This button can be pressed to set side
repeat, chapter or track repeat, or auto-return.
STILL / STEP (FWD / REVERSE):
buttons to produce a still video image (CAV Only).
Additional presses of the STEP FWD button moves the
image forward one frame at a time. STEP REV moves the
image in reverse one frame at a time.
DISP:
Displays or removes the display of current
chapter/frame/track or time numbers on the screen.
During CD playback, track numbers with the disc's
absolute time location are displayed or track and index
numbers are displayed with the elapsed time of the
current track.
SCAN (FWD / REVERSE):
to move quickly forward or backward through the
program material on a disc. Rapid scanning continues as
long as the button is depressed.
AUDIO:
Press this button to select audio output: Digital
Stereo, Digital 1/L, Digital 2/R, Audio OFF, Analog
Stereo, Analog 1/L, Analog 2/R, Audio OFF. Note: CDs
output digital audio only.
SPEED (DOWN / UP):
Press these buttons to set the
speed at which multi-speed play will occur. (CAV only.)
CLEAR:
Press this button to CLEAR erroneous inputs or
to stop a Search operation.
MULTI-SPEED (REV / FWD):
initiate Multi-Speed Play forward or reverse in the speed
that has been set with the SPEED button. (CAV only.)
NUMERIC BUTTONS (0-9):
search points on a disc. Use the CHAP/FRAME
TRACK/TIME button to set an "address flag", indicating
chapter, frame or time number (LD) or track or time
number (CD) . Then enter the numeric digits for the
location and press Search or Play. Digits 1-9 can also be
used for viewer responses during Level III program
execution. See Level III Command Input Number Wait (?N).
SEARCH:
First set the "address flag" using the CHAP/
FRAME TRACK/TIME button. Then specify the number to
be searched to by using the digit buttons. Press the
Note: The CU-V113 & RU-V103 remote control units are not packaged with a cable for connection to the BC Terminal on the front
of the player. A stereo or mono mini-plug cable can be purchased separately, however, and used to provide the wired connection.
CLD-V2600 / 2400 Level I & III User's Manual
CLD-V2600 / 2400 Level I & III • Chapter Three
Press either of these
Press either of these buttons
Press this button to
Use these buttons to enter
See Section 3.2.2, beginning on page 3-6,
for details about the use of each specific
remote control button.
REJECT
REPEAT
MODE
DISP
AUDIO
CLEAR
7
4
1
0
VIDEO DISC PLAYER
REMOTE CONTROL UNIT CU-V113
Figure 3-C
SEARCH button to execute. After searching, the player
presents a still frame on CAV discs or immediately plays
on CLV discs or CDs.
CHAP / FRAME TRACK / TIME:
set the address flag, indicating how a search will be
performed, either by chapter or frame number (CAV), or
chapter or time number (CLV) or Track, Time (CD).
TP 117 v. 2.0 • 12/93
PLAY
PAUSE
STILL / STEP
REV FWD
SCAN
REV FWD
SPEED
DOWN UP
MULTI
REV FWD
8 9
5 6
2 3
CHAP/
FRAME
SEARCH
TRACK/
TIME
LaserDisc
Press this button to
3-5