Self-Diagnostics Function; Display On The Unit - Pioneer PD-F507 Operating Instructions Manual

Probable cause Remedy:
No sound
@ Outputcabies
are connected incorrectly orloosely.
| e Connect properly.
:
@ Incorrect operation of stereo amplifier,
@ Check the settings of amplifier switches and
sound volume controls,
e Pin plugs and/or amplifier terminals are dirty.
@ Clean away dirt.
@ Player is in pause mode,
@ Press ® or.
@ The disc is loaded with the label side jeftward,
@ Reload the disc with the label side rightward.
When
playback is started,
it | @ Disc is inserted in the wrong way.
@ insert the disc correctly with the label side
stops immediately.
rightward.
Pauses or stops during playback.
| # Smudges, etc., on the disc.
@ Clean the smudges from the disc and then play
it again.
Remote control willnotfunction. | @ Dead batteries.
@ Replace batteries.
e Obstruction between player and remote control
| e Relocate
remote control unit or remove
unit.
obstruction.
SELF-DIAGNOSTICS FUNCTION
The unit incorporates a self-diagnostic function
When an abnormality is detected during operation of the unit, an error message (service no.) appears on the unit's display
automatically, Treat the
error by following the instructions in "Countermeasures".
Display on the unit prec reson many see
tt
fot
Service No.
@ Reload the discs properly.
(Insert one disc only ina slot.)
U1
The disc may not be loaded properly in the rack.
@ Check if there is a foreign object attached onto
the disc. :
@ Check if there is a foreign object in the rack.
u2
There is an operation error in the mechanical section
Cae
eee ate
noe ieeetes
POWER-CORD CAUTION
SN
usHt
15
<PRB1265>
En