Pioneer CLD-V2400 Programmer's Reference Manual page 105

47) REGISTER C SET
Function: Changes the current setting of Register C. (Miscellaneous)
Format: Integer
Explanation: When power is turned ON, the Side Repeat function of Register C is
set to ON. If Function Switch 1 on the rear panel of the player is
ON (DOWN), the Load Start and Power-On Start functions of
Register C are also set to ON. If Function Switch 2 is ON (DOWN),
the Baud Rate is set to 1200. Note that some functions, such as
Test Mode, may suspend playback or disable further control.
The functions listed below can be set. To set a function to ON,
give the value indicated by the integer. To set multiple functions
to ON, the integer values must be added up. All eight functions can
be specified in combination by using the decimal values from 0 to
255. The completion status is returned immediately.
NOTE: When "Repeat Side" or "Chapter Repeat" is selected by the
RCU, the Side Repeat function of Register C goes to "ON" and when
"Auto Return" is selected by the RCU, the Side Repeat Function of
Register C goes to "OFF".
Integer
NOTE: Test Mode is used when the player is serviced, to evaluate player operations.
Execution: * Initial value 0
3 R C <C/R>
* Side-Repeat, Load-Start to ON, background color BLUE
1 6 R C <C/R>
* Background Color BLACK; Side-Repeat and Load-Start to OFF
CLD-V2600 / 2400 Level I & III User's Manual
CLD-V2600 / 2400 Level I & III • Chapter Four
LD/CD
R C
Function
1 Side-Repeat
2 Load-Start
4 Power-on-Start
8 (Not Used)
16 Background Color
32 TxD Terminator
64 BAUD Rate
128 Test Mode
Figure 4-V
R <C/R>
R <C/R>
TP 117 v. 2.0 • 12/93
1 0
ON OFF
ON OFF
ON OFF
— —
BLACK BLUE
<CR+LF> <CR>
1200 4800
ON OFF
4-43