Pioneer CLD-V2400 Programmer's Reference Manual page 119

LaserBarcode Standard Commands & Logo
Frame Search (CAV only)
Chapter Search (CAV & CLV)
Frame Segment Play (CAV only)
Chapter Segment Play (CAV & CLV)
All of the sample LaserBarcodes included on page 1 & 2 of Appendix D were prepared using
The symbol below indicates that an application bearing it supports the standard
LaserBarcode command set as established by the LaserBarcode Association. This
symbol may be used only on applications that adhere to the original LaserBarcode
standard command set. Customers look for this logo to
assure the application can be used with any player that is
LaserBarcode compatible.
Standard LaserBarcodes may be created using Pioneer's
Barcode preparation software: The Bar'n'Coder for the
Macintosh, Barkoder for Windows or LaserBarcode Tool Kit
for IBM PC and MS DOS compatible computers.
Contact Pioneer New Media Technologies, Inc., Marketing Division at 310-952-2111
for information about licensing the LaserBarcode Logo.
LaserBarcode is a trademark of Pioneer Electronic Corp.
Macintosh is a registered trademark of Apple Corp.
D-2
TP 117 v. 2.0 • 12/93
Search Commands
Segment Play Commands
Play from Frame 1000 to Frame 1200
Play from Chapter 2 to Chapter 5
Pioneer's Bar'n'Coder for the Macintosh ® .
Appendix D LaserBarcode & LB2 Commands & Logos
(cont.)
Search to Frame 1000
Search to Chapter 2