Pioneer CLD-V2400 Programmer's Reference Manual page 16

Chapter One • CLD-V2600 / 2400 Level I & III
Controlling the CLD-V2400 or CLD-V2600 LD/CD Player
•
Level I — Manual Control
Player is controlled using a Remote Control or Barcode Reader or Front Panel Buttons
• Level III — Computer Control
Commands to control the player are sent via RS-232C from a computer or external controller
LEVEL
3
Computer
Level III - Computer Control
via RS-232C
(See Chapter 4)
For Interface Connections,
(
see Section 2.3.2, pg. 2-10
and Appendix C. )
1-4
TP 117 v. 2.0 • 12/93
For detailed illustrations of Front and Rear
(
Panels of the CLD-V2600, See Figures 2-C &
2-D ( Chapter 2 , page 2-5 & 6); CLD-V2400,
see Figures E & F ( Chapter 2 , page 2-7).
(For Overview of Internal Player Controls,
See Appendix H.)
CLD-V2400 Videodisc Player
wired to the player via the Barcode
Terminal on the front panel. They can also
send infrared signals to the player via the
remote sensor. (See Section 3.2.2, pg. 3-4)
CLD-V2600 / 2400 Level I & III User's Manual
Barcode Terminal
Remote Sensor
The CU-V113
remote packaged with
the player, the optional
remote control RU-V113 or a
Pioneer barcode reader, can be
•
7 8 9
4 5 6
1 3
2
UC-V108BC
0
CU-V113
Level I - Manual Control
Using Front Panel Buttons
(Chapter 3)
LEVEL
1
Using The Remote
Control Unit
(Chapter 3)
Using the Barcode Reader
(Chapter 3)
UC-V109BC
Figure 1-A