Pioneer CLD-V2400 Programmer's Reference Manual page 101

4.7.6 Register Control Commands
45) REGISTER A SET
Function: Changes the current setting of Register A. (Display)
Format: Integer
Explanation: In Register A, detailed attributes concerning the display are set. The
CLD-V2600 & the CLD-V2400 have three types of display settings:
Frame number (LD-CAV) or Time number (LD-CLV, CD); Chapter
number (LD-CAV or CLV) or Track-Index number (CD); and User's
Display for user-generated messages, lines 0-9 on the CLD-V2400
and lines 0-11 on the CLD-V2600. Available combinations of the
display settings are shown in the following table. Initial value is 3.
Integer
All the character displays are turned ON/OFF by the display control command.
The display contents are determined by Register A.
* CD Track and Index numbers are processed in the Chapter Register. CD Block
numbers are processed as part of the time number in the Frame/Time Register.
Frame #(CAV) or Time # (CLV LaserDisc or CD)
Chapter #(CAV/CLV) or Track-Index # (CD)
CLD-V2400 User's Display Lines 0-9
10 lines, 20 characters per line
CLD-V2600 User's Display Lines 0-11
12 lines, 20 characters per line
Figure 4-R
CLD-V2600 / 2400 Level I & III User's Manual
CLD-V2600 / 2400 Level I & III • Chapter Four
LD/CD
Function
0 Display Off
1 Frame or Time Number
2 Chapter or Track Number
3 Frame or Time and Chapter or Track
4 User's Display
5 User's Display and Frame or Time
6 User's Display and Chapter or Track
7 User's Display and Frame or Time,
and Chapter or Track
Figure 4-Q
R A
o o
o o
o o
Register A
TP 117 v. 2.0 • 12/93
User's Chapter/ Frame/
Track Time
0 0 0
0 0 1
0 1 0
0 1 1
1 0 0
1 0 1
1 1 0
1 1 1
o o
Display
Control
4-39