Operation for extracting log using commercial PC (2)
When the communication terminal is connected to LAN, a log can be extracted from the communication
terminal using telnet with PC connected to LAN.
Even when the communication terminal is not connected to LAN, a log can be extracted from the com-
munication terminal using telnet by connecting the 100BASE-TX/10BASE-T connector on the rear panel
of the communication terminal and the LAN connector of PC directly using a LAN cross cable.
First, connect the communication terminal and PC to LAN, or connect them directly using a cross cable
and set LAN (TCP/IP) properties of PC. After that, issue "ping" command PC to the communication
terminal and confirm that a reply is returned from the communication terminal.
(1) Click "Command Prompt" from "Start menu".
2-9
PCS-G70/G70P/G50/G50P