Sony PCS-G50 System Integration Manual page 41

(PCS-G50/G50P)
Menu Page Item 1
LAN Setup 1/1 PPPoE
1/1 NAT/Port/
Firewall
1/1 QoS
PCS-G70/G70P/G50/G50P
Page Item 2 Description
1/2 PPPoE Select PPPoE termination On/Off using this unit.
PPPoE User Enter PPPoE connection user name (account) acquired
Name from provider.
PPPoE Enter PPPoE connection password acquired from provider.
Password
2/2 Fixed IP for Select "On" when fixed IP address for PPPoE connection is
PPPoE acquired from provider. Select "Off" when automatically
acquiring it for each session.
Fixed IP Address Enter fixed IP address acquired from provider when "Fixed
for PPPoE IP for PPPoE" is "On".
PPPoE DNS Select "Obtain automatically" when acquiring IP address of
DNS server from the server during PPPoE connection.
Select "Specify" when fixed IP address exists.
Primary DNS Enter IP address of primary DNS server when "PPPoE DNS"
is "Specify".
Secondary Enter IP address of secondary DNS server when "PPPoE
DNS DNS" is "Specify".
1/2 NAT Mode Select "On" when connecting this unit to local network using
NAT (Network Address Translation). Select "Off" when not
connecting it.
NAT Address Set IP address on the global side that NAT uses.
Port Number Select whether to fix TCP port number and UDP port number. Default value
Used Custom: The port number that the user sets is used.
Default:
TCP port number 2253 and UDP port number 49152 are set.
TCP Port Set TCP port number when "Port Number Used" is "Custom". 2253
Number
UDP Port Set UDP port number when "Port Number Used" is "Custom". 49152
Number
2/2 NAT/Firewall Select "On" when traversing firewalls to conduct conferences
Traversal with terminals on other networks using H.460 and select "Off"
when not traversing firewalls.
1/1 Hybrid Select "On" when automatically switching FEC function,
packet resend request function, and adaptive rate control
function according to network status. Select "Off" when
not switching them.
Forward Error If the received packets contain errors, select "On" when
Correction correcting errors on the receiving side and select "Off" when
not correcting errors.
Packet Select "On" when making a resend request due to packet
Resend loss when "Hybrid" is set to "Off". Select "Off" when not
Request making it.
Adaptive Rate Can be set when "Packet resend request" is set to
Control OFF. Select "ON" when you always optimize the LAN band-
width. Select "OFF" when you do not optimize it.
Default port number is used.
Default
Off
Blank
Blank
Off
Blank
Obtain
Automatically
Blank
Blank
Off
Blank
Off
On
On
On
On
(Continued)
1-37