Connecting Two Camera Units (Pcs-G50/G50P) - Sony PCS-G50 System Integration Manual

1-9. Connecting Two Camera Units (PCS-G50/G50P)

Up to four camera units can be connected to PCS-PG50/PG50P as illustrated below.
m
. The figure below shows connections of camera units only.
. Be sure to turn off all the equipment before making any connections.
. Do not connect/disconnect the camera cable with the power on. Doing so may damage the camera unit
or communication terminal.
n
Besides EVI-D100/D100P (not supplied), BRC-300/300P (not supplied) can also be used.
PCS-G70/G70P/G50/G50P
EVI-D100/D100P
(Main 2nd camera)
BACKUP IRSELECT
OFF ON
DC IN
VIDEO S VIDEO IN VISCA OUT 12V
VISCA cable
(not supplied)
S-video connecting cable (not supplied)
DC 19.5V IR OUT
AUX CONTROL
1 2
PCSA-CG70/CG70P
(Main 1st camera)
TERMINAL VISCA OUT
VISCA conversion cable
(not supplied)
Camera cable
(supplied with camera unit)
AUDIO OUT AUDIO IN MAIN
(MIXED) AUX LINE CAMERA AUX IN
MIC
(PLUG IN POWER)
1 2
WHITE 100BASE-TX/
1 2
EC-MIC RGB OUT BOARD 10BASE-T DSB
CTRL-S 1 2 ISDN UNIT
AUX MONITOR
VIDEO OUT
PCS-PG50/PG50P
1-49