How To Take Log - Sony PCS-G50 System Integration Manual

2-4. How to Take Log

Communication terminal has a function that outputs the internal processing history, between the connec-
tion and disconnection of a line, to the commercial personal computer (referred to as PC hereafter)
connected to the outside and a function that saves the latest history of 1M byte in a Memory Stick (refer
to the saving of system log on page 2-17).
Operation for extracting log using commercial PC (1)
Connect an AUX CONTROL terminal on the rear panel of the communication terminal and PC.
Turn on the power of the communication terminal and PC.
Camera unit
(PCSA-CG70/CG70P)
Communication terminal
(PCS-PG70/PG70P/PG50/PG50P)
Activate accessory software "Hyper Terminal" of OS Windows 95/98/2000/XP on PC and set the proper-
ties of a communication port as follows.
Transmission rate: 38,400 bps
Data length: 8 bits
Stop bits: 2 bits
Parity bit: None
The procedure for "Hyper Terminal" activation, communication format setting, and log extraction is
described on the next page and later.
. Windows is the registered trademark of Microsoft Corporation in the United States and other countries.
. For Windows 2000/XP, the procedure is "Start menu"
cations" "Hyper Terminal".
Note: In a hyper terminal, only 500 lines can be logged. For long-time logging, use other terminal
software.
2-4
(RS-232C cross cable)
"Program"
Personal computer
"Accessories" "Communi-
PCS-G70/G70P/G50/G50P