Sony PCS-G50 System Integration Manual page 40

(PCS-G50/G50P)
Menu Page Item 1
Administrator 1/1 Other Settings 1/2
Setup
LAN Setup 1/1 General
1/1 Gatekeeper
1/1 SNMP
1-36
Page Item 2 Description
Web Monitor Select "On" when allowing conference monitoring function
(auto-update of JPEG images) from the Web browser.
Select "Off" when inhibiting it.
Web access Selects whether to enable access from Web or Telnet to this
unit.
Save Setup Saves each setting data in "Memory Stick".
Each set data in "Memory Stick" is overwritten.
Load Setup Loads each setting data from "Memory Stick".
Each setting data of this unit is overwritten.
Function Enter a command for starting the use of an IPELA VC Link
Extension service. (Service used only in Japan)
Command
2/2 AMX Device Select "On" when exporting the AMX Device Discovery
Discovery information onto the network periodically and select "Off"
when not exporting it.
HOP Set (enter) the HOP count (0 to 255) for the data to be
exported.
1/2 DHCP Mode Select "Auto" when using DHCP (Dynamic Host
Configuration Protocol). Select "Off" when not using it.
When "Auto" is set, IP address, net mask, gateway address,
and DNS address are automatically acquired.
Host Name Enter host name.
IP Address Enter IP address when DHCP mode is set to "Off".
Network Mask Enter network mask when DHCP mode is set to "Off".
Gateway Enter gateway address when DHCP mode is set to "Off".
Address
DNS Address Enter DNS (Domain Name System) server address when
DHCP mode is set to "Off".
2/2 LAN Mode Select interface type and communication mode for LAN
connection.
1/1 Gatekeeper Select "On" when using a gatekeeper and set to "Off" when
Mode not using it. Select "Auto" when automatically searching a
gatekeeper.
Gatekeeper Set IP address of gatekeeper.
Address
User Alias Set user name (H.323 alias) to be registered in a gatekeeper. Blank
User Number Set user number (E.164 number) to be registered in a
gatekeeper.
1/1 SNMP Mode Select "On" when enabling service of SNMP (Simple
Network Management Protocol) agent. Select "Off" when
disabling it.
Trap Destination Set IP address of SNMP manager that transmits a trap.
Community Set community name that SNMP manager manages.
Usually, set to "public".
Description This is the description of this device. Entered as
"Videoconference Device". This cannot be changed.
Location Set the place where this unit is installed.
Contact Set information on the administrator of this unit.
Default
Off
Enabled
Blank
On
Blank
Off
Blank
Blank
Blank
Blank
Blank
Auto
Negotiation
Off
Blank
Blank
Off
Blank
public
Videoconference
Device
Blank
Blank
(Continued)
PCS-G70/G70P/G50/G50P