Sony PCS-G50 System Integration Manual page 18

11. Set the following items on LAN.
LAN Setup Wizard
DHCP Mode Off
Host Name
IP Address
Network Mask
Gateway Address
DNS Address
Previous Next
DHCP Mode:
Sets DHCP (Dynamic Host Configuration Protocol).
AUTO: Automatically assigns an IP address, net-
work mask, gateway address, and DNS
address.
OFF: Deactivates DHCP. In this case set an IP
address, network mask, gateway address,
and DNS address manually.
Host Name:
Enter a host name.
IP Address:
Enter an IP address for the communication terminal.
Network Mask:
Enter a network mask.
Gateway Address:
Enter a default gateway address.
DNS Address:
Enter a DNS (Domain Name System) server address.
m
. If the "DHCP Mode" has been set to "AUTO", the
automatically assigned IP address can be confirmed
in the launcher menu or information menu.
. If you do not know how to setup the LAN, check
with a network administrator for connecting-
network.
12. Select "Next" using the , , , or
remote commander, then press the PUSH ENTER
button.
A confirmation message is then displayed.
m
. To stop the setting
Select "Cancel" using the , , , or
the remote commander, then press the PUSH
ENTER button.
. To return to the preceding wizard
Select "Return" using the , , , or
the remote commander, then press the PUSH
ENTER button.
1-14
Cancel
button on the
button on
button on
13. Select "Save" using the , , , or
remote commander, then press the PUSH ENTER
button.
Save
Previous Cancel
The settings are saved, and then the launcher menu
will be displayed.
Tokyo
New York
IP: 012.345.678.678
ISDN: 012345678956789
Paris
AUTO
Enter the remote party number.
Launcher menu
n
Used with an optional device especially designed for
use with this system, such as the data solution box or
ISDN unit, for the first time, the communication
terminal may automatically upgrade the software of
the connected device. While the upgrading message is
displayed on the monitor screen, be sure not to turn off
the communication terminal. Doing so may cause
malfunction of the system. System malfunction may
also occur when a system power-off has been caused
by an accidental problem such as a power interruption
during upgrading. If connection of the data solution
box or ISDN unit to the communication terminal is not
re-established even after the system power is recov-
ered, consult a Sony dealer.
button on the
Phone Book
Detail Dial
History
Menu
Information
Dial
PCS-G70/G70P/G50/G50P