Service Mode - Sony PCS-G50 System Integration Manual

2-6. Service Mode

In the service menu of communication terminal, data can
be saved in the a commercial Memory Stick or read from a
Memory Stick (overwritten in the current data).
1. Continuously press the MENU button on the remote
commander and display the Setup menu including
"Dial" and "Answer".
Dial
Communication
Audio
General
LAN
Information
2. Select "Dial" using the
mander. Enter "7" and "2" sequentially using the
numeric key on the remote commander without
pressing the PUSH ENTER button and display the
Service menu.
Service
Command
Save Phone Book
Load Phone Book
Clear Phone Book
Save Application
Save Call Log
Save System Log
n
To cancel the Service mode, select "Cancel" using ,
, and buttons on the remote commander and
press the PUSH ENTER button, or press the RETURN
button on the remote commander. The current display
returns to the Setup menu.
2-16
Setup
Answer
Status
Video
Administrator
ISDN
button on the remote com-
Save Setup
Load Setup
Clear Setup
Load Application
System Reset
Clear Log
Save Cancel
For saving of a phone book, loading of a phone
book, saving of application, saving of a
communication log, saving of a system log,
saving of setting, and loading of setting
1. Display the Service menu.
2. Insert the Memory Stick, in which data can be written
or in which the required contents have been already
recorded, into the Memory Stick slot.
3. Select the function, which you want to execute, using
, , and buttons on the remote commander and
press the PUSH ENTER button.
4. A confirmation message on whether to execute the
function is displayed. To execute, select "OK" and
press the PUSH ENTER button. To cancel execution,
select "Cancel" and press the PUSH ENTER button.
5. After execution or cancellation, the current display
returns to the Service menu.
6. Push in the Memory Stick once and take out it.
For erasing a phone book, a log, and setup
(Can be done even in the Setup menu for the
administrator menu.)
1. Display the Service menu.
2. Select the function, which you want to execute, using
, , and buttons on the remote commander and
press the PUSH ENTER button
3. A confirmation message on whether to execute the
function is displayed. To execute, select "OK" and
press the PUSH ENTER button. To cancel execution,
select "Cancel" and press the PUSH ENTER button.
4. After execution or cancellation, the current display
returns to the Service menu.
For system reset
1. Display the Service menu.
2. Select "System Reset" using , ,
the remote commander and press the PUSH ENTER
button
3. A confirmation message on whether to execute is
displayed. To execute, select "OK" and press the
PUSH ENTER button. To cancel execution, select
"Cancel" and press the PUSH ENTER button.
4. After execution, the launcher menu is displayed. After
cancellation, the current display returns to the Service
menu.
and buttons on
PCS-G70/G70P/G50/G50P