Removing The Split Bench Seat - Chevrolet VENTURE 2005 Owner's Manual

Removing the Split Bench Seat

Make sure the seatback is in the upright position.
1. For the second row split bench, with the seatback
in the upright position, unhook the side attachment
for the safety belt. This mini-buckle is located
on the right side of the seat.
3. Lift the seatback recliner lever or pull the nylon
strap on the back of the seat to fold the seatback
forward.
4. If the seat is in the second row, lift one of the
adjustment levers and slide the seat fully rearward.
2. Push the red center of
the buckle with a small
pointed object to
remove the seat belt,
if needed.
5. From behind the bench seat, pull the nylon strap at
the center of the base of the seat to release the
rear latches from the floor pins.
Do not let go of the strap until the seat is folded all
the way forward.
1-11