Remote Driver Unlock Control - Chevrolet VENTURE 2005 Owner's Manual

Table of Contents

Advertisement

Remote Driver Unlock Control

This feature allows you to customize the UNLOCK
button on the remote keyless entry transmitter.
Programmable Modes
Mode 1: Remote All Doors Unlock. When you press
UNLOCK on your remote keyless entry transmitter,
all doors and the liftgate will unlock.
Mode 2: Remote Driver's Door Unlock Only. When you
press UNLOCK on your remote keyless entry transmitter
once, the driver's door will unlock. When you press
UNLOCK on your remote keyless entry transmitter again
within five seconds, all doors and the liftgate will unlock.
Your vehicle was originally programmed to Mode 2.
The mode may have been changed since then.
To determine the current mode, or to change the mode,
do the following:
1. Follow the instructions for Entering Programming
Mode on page 2-55.
2. Press UNLOCK on the remote keyless entry
transmitter.
3. Count the number of chimes you hear. The number
of chimes indicates the vehicle's current
programmed mode. If you do not wish to change the
current mode, you can either exit the programming
mode by following the instructions later in this section
or program the next feature available on your vehicle.
4. Press UNLOCK to change the current mode.
5. Press UNLOCK until you hear the number of chimes
corresponding to the mode selection you want.
The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.
2-59

Advertisement

Table of Contents
loading

Table of Contents