Taillamps, Turn Signal, Stoplamps And Back-Up Lamps - Chevrolet VENTURE 2005 Owner's Manual

Taillamps, Turn Signal, Stoplamps
and Back-up Lamps
1. Open the liftgate.
2. Remove the two screws from the taillamp housing
on the inboard side.
3. Pull off the entire taillamp housing.
The locator/retaining pins on the outboard side are
part of the lamp assembly and will not be
removed during this procedure.
5-50
4. Remove the bulb holder by pressing the four
retaining tabs and pulling the holder away from
the assembly.