Removing The Bench Seat - Chevrolet 2006 Tahoe Owner's Manual

Removing the Bench Seat

To remove the seat, do the following:
1. Open the liftgate to access the controls for the
bench seat and enter the rear of the vehicle.
2. Fold the seatback forward using the instructions
listed under "Folding the Seatback" previously.
The seat cannot be removed unless the seatback is
folded.
4. Lift the rear of the seat up from the floor.
3. Pull up on the release
lever labeled 2, located
at the rear of the
seat, to unlatch the
rear of the seat
from the floor.
6. While holding the rear of the seat up, roll the seat
out of the vehicle.
5. Pull on the release
strap, located in the
lower center of
the seat, to release the
seat from the floor
and pull the seat out.
Use one hand to
pull the release strap
and the other on
the handle to pull the
seat out.
1-21