Chevrolet VENTURE 1998 Manual

page of 475

/ 475
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Table of Contents

Summary of Contents for Chevrolet VENTURE 1998

Page 3 To set the SET' will appear. SEEK button...
Page 6 This section tells you when to perform vehicle maintenance and what fluids and lubricants to use. Customer Assistance Information This section tells you how to contact Chevrolet for assistance and how to get service and owner publications. also gives you information on “Reporting Safety Defects”...
Page 7 For vehicles first sold in Canada, substitute the name For Canadian Owners Who Prefer a “General Motors of Canada Limited” for Chevrolet Motor Division whenever it appears in this manual. French Language Manual:...
Page 8 Chevrolet. Louis Chevrolet, the other half of the team, at the wheel of his experimental “Classic which entered production in 191 2. Six, ” t - - - - -...
Page 9 The legacy of America's favorite sportscar began in 1953, when 319 hand-assembled In 1932 Chevrolet white Corvettes introduced the launched Synchro-Mesh first use o f a transmission and fiberglass body in ofSered a host o f a production car accessories...
Page 10 V8. public 60’s automotive excitement included Chevrolet landmarks like the Corvette Sting Ray, Your new Chevrolet continues a tradition of quality and value. the sporty Camaro, and powerplants like the legendary 327 V8.
Page 11 How to Use this Manual Many people read their owner’s manual from beginning when to end they first receive their vehicle. do this, it will help you learn about the features and These mean there is something that could hurt controls for your vehicle.
Page 12 area, In the notice we tell you about something that Vehicle Damage Warnings can damage your vehicle. Many times, this damage Also, in this book you will find these notices: would not be covered by your warranty, and it could be costly.
Page 13 Vehicle Symbols These of the symbols you may find on your vehicle. some For example, These symbols These symbols These symbols These symbols Here are some these symbols are important have to do with are on some of are used on other symbols are used on an for you and...
Page 14 Section 1 Seats r--Id Restraint Systems Here you’ll find information about the seats in your Chevrolet and how to use your safety belts properly. You can also not do learn about some things you should with air bags and safety belts.
Page 15 Seats and Seat Controls This section tells you about the seats adjust them, take them out, put them back in and fold and unfold them. Driver’s 4-Way Manual Seat To raise the seat, pull up on the lever on the front right side the seat.
Page 16 Folding Driver’s Seatback Driver’s 6-Way Power Seat (Option) The seatback on the driver’s seat folds forward to put items behind the seat. Lift the lever and fold the seatback forward. The seatback will lock into place when you push it back to the upright position.
Page 17 Manual Front Passenger Seats Reclining Front Seatbacks All front seats recline. To use, pull up the lever on the front of the seat to To adjust the seatback, unlock it. rotate this knob. It is easier to recline the seat if you lean forward, taking your weight off the seatback.
Page 18 Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts can’t do their job when you’re reclined like this. The shoulder belt can’t do its job because it won’t be against your body.
Page 19 Manual Lumbar Control the levers and straps, in the correct order, you can easily remove the seats from your vehicle. Turn the knob on the sure to When you replace the seats in the vehicle, be inboard side of the follow the label on the back of the seat for proper location.
Page 20 Dump and Stow Feature Second Row Safety Belt Stowage The rear seats in your vehicle can be folded forward. If your vehicle has seats in the third row, there is a sleeve on the second row outside safety belt to store the Use this feature for exiting and entering third row seats safety belt while entering and exiting the third seats.
Page 21 Removing the Second Row Solid Bench Seat Second Row Solid Bench Seats in the With the seatback upright position, unhook the Folding the Seatback This side attachment for the safety belt. mini-buckle is located on the right side of the seat. To fold down the seatback, pull the nylon strap on the Push up the red center on...
Page 22 4. Unhook the front latches by rolling up the gray 2. From behind the bench seat, pull the nylon strap at handle under the seat until the handle locks. the base of the seat to release the rear latches from the floor pins.
Page 23 5. Remove the seat by 1. Place the front hooks of the bench seat onto the rocking it slightly at the top towards the rear of front two floor pins. To do this, the seat will the vehicle and then lift at the front latch release need to be angled so that the front hooks clear the...
Page 24 3. If the front legs are not attached correctly, the rear 4. Firmly push the rear hooks into the rear floor pins by legs will not attach to the rear set of floor pins. pushing down on the rear of the seat. 5 .
Page 25 8. Attach the mini-buckle that the safety belt is ready use when a passenger uses the seat. CAUTION: The buckle reattaches by pushing the latch into the buckle until the red center pops out again. A seat that isn’t locked into place properly can move around in a collision or sudden stop.
Page 26 Adjusting the Third Row Solid Bench Seat Third Row Solid Bench Seats Folding the Seatback To fold down the seatback, pull the nylon strap on the back of the seat. To raise the seatback, pull the nylon strap while raising the seatback until it locks upright.
Page 27 Removing the Third Row Solid Bench Seat the back of the seat to fold 1. Pull the nylon strap the seatback forward. 2. Slide the seat all the way back by either lifting the front adjuster bar and pushing back, or by lifting the handle on the back of the seat and pulling the seat towards the rear of the vehicle.
Page 28 6. Remove the seat by 4. Do not let go of the straps until the seat is folded all rocking it slightly the way forward. toward the rear of the vehicle and then pulling it out. This should be done in one motion..
Page 29 Replacing the Third Row Solid Bench Seat Don’t put the bench seat in so it faces rearward because it won’t latch that way. If you want more storage room behind the seat, adjust the seat by sliding it forward. The solid benches have seat position labels, located the back of the seat, showing where the seat must go.
Page 30 3. If the front legs are not attached correctly, the rear 4. If the front latches are not attaching correctly, check legs will not attach to the rear set of floor pins. that the seat is in the full rear position. 5.
Page 31 Split Bench Seats or 40/60), the If you have the split bench seat (50/50 seatbacks can be folded down individually and the sections can be removed individually. sections can A seat that isn’t locked into place properly can also be adjusted forward or rearward individually. move around in collision or sudden stop.
Page 32 Adjusting the Split Bench Seats Use the lever on the front of the seatback to raise or lower the seatback to the desired position. There are two adjustment levers on each section of the split bench seats to adjust the seat forward or rearward. They are located below the center of each section of the split bench, one in front and one in back of the seat.
Page 33 Lift up either lever and Push up the red center on slide the seat forward to the buckle with a small allow for extra storage pointed object like behind the seat, slide the or pen. seat back to allow extra room for passengers.
Page 34 5. To unlatch the front latches, squeeze the angled latch 3. From behind the bench seat, pull the nylon strap at release bar toward the straight crossbar. the base of the seat to release the rear latches from the floor pins. Do not let go of the straps until the seat is folded all way forward.
Page 35 6. Remove the seat by Replacing the Split Bench Sections rocking it slightly Don’t put the sections of the bench seat in so they face towards the rear of the rearward because they won’t latch that way. If you want vehicle and then pulling more storage room behind the seat, adjust each section it out.
Page 36 2. To do this, the bench seat will need to be angled so that the front hooks clear the floor pins. 1. Squeeze the angled gray bar towards the solid gray crossbar while placing the front hooks of the bench seat onto the front two floor pins.
Page 37 If the front legs are not attached correctly, the rear 4. If the front latches are not attaching correctly, check legs will not attach to the rear set of floor pins. that the seat is in the full rear position. 5.
Page 38 9. Attach the mini-buckle so that the safety belt is ready for use when a passenger uses the seat. CAUTION: The buckle reattaches by pushing the latch into the buckle until the red center pops out again. A seat that isn’t locked into place properly can move around in a collision or sudden stop.
Page 39 Bucket Seats Folding or Reclining the Seatbacks To fold down the seatback on either section of the split There are three types of rear bucket seats: RIGHT bench seat, pull the nylon strap on the back of the seat or ONLY, CENTER OR LEFT and LEFT ONLY.
Page 40 Adjusting the Bucket Seats Use the lever on the front of the seatback to raise or lower the seatback to the desired position. There are two adjustment levers on each seat to adjust the seat forward or rearward. They are located below th center, one in front and one in back of the seat.
Page 41 Removing the Bucket Seats Lift up either lever and slide the seat forward to Make sure the seatback is the upright position. The allow for extra storage head restraints should be fully down. behind the seat, or slide the 1. Lift the seatback recliner lever or pull the nylon strap seat back to allow extra on the back of the seat to fold the seatback forward.
Page 42 Do not let of the straps or lever until the seat is 5. To unlatch the front latches, with the seat folded folded all the way forward. forward, squeeze the angled latch release bar towards the straight crossbar. 1-29...
Page 43 RIGHT ONLY seats that don’t have the built-in child Remove the seat by rocking it slightly only in the right location of either restraint option or I and J sets of floor cups. towards the rear row, the vehicle and then pulling CENTER OR LEFT seat fits in the center location it out.
Page 44 Make sure the seat is in the full rear position before beginning this procedure. 1. With the seat folded, squeeze the angled gray towards the solid gray crossbar while placing the front hooks of the bench seat onto the front two floor pins. To do this, the seat will need to be angled so that the front hooks...
Page 45 CAUTION: A seat that isn’t locked into place properly can move around in a collision sudden stop. People in the vehicle could be injured. Be sure to lock the seat into place properly when installing 6 . Lift the seatback recliner lever or pull the nylon strap on the back of the seat and raise the seatback until it locks upright.
Page 46 Captain’s Chairs Removing the Captain’s Chairs The captain’s chairs adjust like the manual front passenger seats. The seatback can be reclined or raised by turning the knob on the inboard side of the seat. It is easier to raise or lower the seatback if you lean forward and take the weight off the seatback.
Page 47 Replacing the Captain’s Chairs goes in the A and sets of floor pins. The left chair h e nght chair goes in the D and sets of floor pins. 1. Hook the front latches over the front floor pins. 2. The seat can then be lifted off the front floor pins and removed from the vehicle.
Page 48 Safety Belts: They’re for Everyone This part of the manual tells you how to use safety belt properly. It also tells you some things you should not do with safety belts. And it explains the air bag system. CAUTION: Don’t let anyone ride where he or she can’t wear a safety belt properly.
Page 49 Your vehicle has a light comes on as a reminder that to buckle up. (See “Safety Belt Reminder Light” in It is extremely dangerous to ride in a cargo area, the Index.) inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
Page 50 Why Safety Belts Work When you ride in or on anything, you go as fast as it goes. Put someone on it. Take the simplest vehicle. Suppose it's just a seat on wheels. 1-37...
Page 51 Get it up to speed. Then stop the vehicle. The rider The person keeps going until stopped by something. doesn't stop. In a real vehicle, it could be the windshield 1-38...
Page 52 or the safety belts ! . . . or the instrument panel With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That’s safety belts make such good sense.
Page 53 If I’m a good driver, and I never drive far from Here Are Questions Many People Ask home, why should I wear safety belts? About Safety Belts and the Answers You may be an excellent driver, but if you’re in an Q .
Page 54 How to Wear Safety Belts Properly Adults This part is only for people of adult size. Be aware that there are special things to know about safety belts children. there different rules for smaller children and babies. If a child will be riding in your vehicle, see the part of manual called “Children.”...
Page 55 4. Push the latch plate into the buckle until it clicks. up on the latch plate to make sure it is secure. If Pull the belt isn’t long enough, see “Safety Belt Extender” at the end of this section. Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.
Page 56 Shoulder Belt Height Adjuster move down, push down on the button move the height adjuster to the desired position. You can move Before you begin to drive, move the shoulder belt the adjuster up just by pushing up on the shoulder belt adjuster to the height that is right for you.
Page 57 What’s wrong with this? CAU d O N : You can be seriously hurt if your shoulder belt too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit against your body. The shoulder belt is too loose.
Page 58 What's wrong with this? CAT'TION: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not at the pelvic bones.
Page 59 What's wrong with this? You can be seriously injured if your belt goes over an armrest like this. The belt would be much too high. In a crash, you can slide under the belt. The belt force would then be applied at the abdomen, not at the pelvic bones, and that could cause serious or fatal injuries.
Page 60 &: What’s wrong with this? You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the ribs, which aren’t strong as shoulder bones.
Page 61 What’s wrong with this? You can be seriously injured by a twisted belt. In a crash, you wouldn’t have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer to The belt is twisted across the body.
Page 62 Safety Belt Use During Pregnancy Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they don’t wear safety belts. To unlatch the belt, just push the button on the buckle. The belt should go back out of the way.
Page 63 The best way to protect the fetus is to protect the mother. Here are the most important things know about the -ir bag systems: When a safety belt is worn properly, it’s more likely that the fetus won’t be hurt in a crash. For pregnant women, anyone, key to making safety belts effective is wearing CAUTION:...
Page 64 bags for the d r L a ’ and right front passenger are Children who are up against, very close only in designed to inflate moderate to severe air bag when it inflates can be seriously injured crashes where something hits the side of your or killed.
Page 65 How the Air Bag Systems Work There is an air bag readiness light on the Where are the air bags? instrument panel, which The driver’s frontal air bag is in the middle of the shows a deployed air bag. steering wheel. The system checks the air bag electrical system malfunctions.
Page 66 The right front passenger’s side impact air bag is in the The right front passenger’s frontal air bag is in the side of the passenger’s seatback closest to the door. instrument panel on the passenger’s side. The driver’s side impact air bag is in the side of the driver’s seatback closest to the door.
Page 67 into a wall that doesn’t move or deform, the threshold level is about 9 to 15 mph (14 to 24 km/h). CAUTION: threshold level can vary, however, with specific vehicle design, so that it can be somewhat above or below this If something is between an occupant and an air range.
Page 68 does an air bag restrain? In any particular crash, no one can say whether an air bag should have inflated simply because of the damage near In moderate to severe frontal or frontal collisions, even wheel or to a vehicle or because of what the repair costs were. For belted occupants can contact the steering frontal air bags, inflation is determined by the angle of...
Page 69 What will you see after an air bag inflates? In many crashes severe enough to inflate an air bag, windshields are broken by vehicle deformation. After an air bag inflates, it quickly deflates, quickly from Additional windshield breakage may also occur air bag that some people may not even realize the right front passenger air bag.
Page 70 If your vehicle ever gets into a lot of water such as NOTICE: water up to the carpeting or higher or if water enters your vehicle and soaks the carpet, the air bag controller can be soaked and ruined. If this ever happens, and then If you damage the covering for the driver’s or the you start your vehicle, the damage could make the right front passenger’s air bag, or the air bag...
Page 71 Servicing Your Air Bag-Equipped Vehicle Rear Seat Passengers Air bags affect how your vehicle should be serviced. It’s very important for rear seat passengers to buckle up! There are parts of the air bag systems in several places Accident statistics show that unbelted people in the rear around your vehicle.
Page 72 .. . Lap-Shoulder Belt The positions next to the windows have lap-shoulder 1. Pick up the latch plate and pull the belt across you. belts. Here’s how to wear one properly. Don’t let it get twisted. The shoulder belt may lock if you pull the belt across you very quickly.
Page 73 2. Push the latch plate into the buckle until it clicks. 3. To make the lap part tight, pull down on the buckle end of the belt as you pull up on the shoulder part. Pull up the latch plate to make sure it is secure. When the shoulder belt pulled out all the way, it will lock.
Page 74 The safety belt locks if there’s a sudden stop or a crash, or if you pull the belt very quickly out of the retractor. CAUTION: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury.
Page 75 Rear Safety Belt Comfort Guides for Children and Small Adults Your vehicle may have rear shoulder belt comfort guides. This feature will provide added safety belt comfort for children who have outgrown child restraints and for small adults. When installed on a shoulder belt, the comfort guide pulls the belt away from the neck and head.
Page 76 2. Place the guide over the belt and insert the two edges 3. Be sure that the belt is not twisted and it lies flat. The guide must be on top of the belt. of the belt into the slots of the guide.
Page 77 Center Passenger Position (Bench Seat) 4. Buckle, position and release the safety belt as Lap Belt described in “Rear Seat Outside Passenger Positions’, earlier in this section. Make sure that the shoulder If your vehicle has a third row rear bench seat, someone belt crosses the shoulder.
Page 78 When you sit in the center position of the bench seat, To make the belt shorter, pull its free end as shown until have a lap safety belt, which has no retractor. To the belt is snug. make the belt longer, tilt the latch plate and pull it along Buckle, position and release it the same way as the lap the belt.
Page 79 Center Passenger Position (Bucket Seat) When you sit in the center position bucket seat, you have a lap safety belt which has retractor. Lap Belt 1. Pick up the latch plate and, in a single motion, pull If your vehicle has bucket seats, someone can sit in the the belt across you.
Page 80 TO HELP AVOID PERSONAL INJURY SECURELY LATCH SEAT LOCATION SHOWN SEE OWNER’S MANUAL FOR MORE INFORMATION. Seat Location Printed 10279595 The center position bucket seat is a CENTER OR LEFT type seat. Because it is the only bucket seat with a lap belt, and has a buckle on only one side, there are certain places a CENTER OR LEFT type bucket seat should, and should not, be used.
Page 81 Sma'' -r Ch" dren and Babies Children Everyone in a vehicle needs protection! That includes infants and all children smaller than adult size. Neither -AUTION: the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. Children who are up against, or very close to, an In fact, the law in every state in the United States and in every Canadian province says children up to some age...
Page 82 Infants need complete support, including support for the head and neck. This is necessary because an infant’s neck is weak and its head weighs so much compared with the rest of its body. In a crash, an infant Smaller children and babies should always be in a rear-facing restraint settles into the restraint, in a restrained...
Page 83 at only 25 mph (40 km/h), a 12-lb. (5.5 kg) baby will suddenly become a 240-1b. (110 kg) force on your arms. The baby would be almost impossible to hold. Secure the baby in an infant restraint. Never hold a baby in your arms while riding in a vehicle.
Page 84 Built-in Child Restraint (Option) If your vehicle has this option in a bucket seat, each bucket seat that has the built-in child restraint fits only one location in your vehicle. To find out where a bucket seat that has a built-in child restraint must be located in your vehicle, see “Removable Rear Bucket Seats”...
Page 85 This child restraint system conforms to all applicable Federal Motor Vehicle Safety Standards. Each child restraint is designed for use only by children who weigh between 22 and 40 pounds (10 and 18 kg) BEFORE YOU USE THIS CHILD RESTRAINT, and whose height is between 33.5 and 40 inches BE SURE THE TOP OF THE CHILD’S (850 and 1 016...
Page 86 Securing a Child in the Built-In Child Restraint 2. Rotate the head restraint rearward until it touches the top of the seatback. Make sure there is no gap between the lower edge of the head restraint and the top of the seatback. 1.
Page 87 3. Lower the child restraint cushion. You’ll be using the child restraint’s harness (A) to secure your child. Don’t use the vehicle’s safety belts.
Page 88 CAUTION: Using the vehicle’s regular safety belts on a child seated on the child restraint cushion can cause serious injury to the child in a sudden stop or crash. If a child is the proper size for the built-in child restraint, secure the child using the child restraint’s harness.
Page 89 Be sure the buckle is free of any foreign objects that may prevent you from securing the latch plates. If you can’t secure a latch plate, see your Chevrolet dealer for service before using the child restraint. Place the other side of the harness over the child’s shoulder.
Page 90 10. Pull up on both latch plates to make sure they 11. Now fasten the left and right halves of the are secure. shoulder harness clip together. The purpose of this clip is to help keep the harness positioned on the child's shoulders.
Page 91 ’ CAUTION: An unfastened shoulder harness clip won’t help keep the harness in place on the child’s shoulders. If the harness isn’t on the child’s shoulders, it won’t be able to restrain the child’s upper body in a sudden stop or crash. The child could be seriously injured.
Page 92 Removing the Child from the Built-In Child Restraint 13. Adjust the position of the harness on the child’s shoulder by moving the clip up or down along the harness. On each side of the harness, the shoulder part should be centered on the child’s shoulder. The 1.
Page 93 Storing the Built-In Child Restraint Always properly store the built-in child restraint before using the vehicle’s lap-shoulder belt. Unlatch the harness by pushing the button on the buckle. Move one side of the harness off the child’s shoulder. Move the other side of the harness off the 1.
Page 94 2. Fold the child restraint cushion and leg rest up into 4. Then press the leg rest firmly into the seatback, and the seatback. secure it by pressing the upper corners against the fastener strips on the seatback. 3. Press the child restraint cushion firmly into the seatback.
Page 95 Child Restraints Every time infants and young children ride vehicles, they should have protection provided by appropriate restraints. &= What are the different types of add-on child restraints? Add-on child restraints are available in four basic types. When selecting a child restraint, take into consideration not only the child’s weight and size, but also whether or not the restraint will be...
Page 96 An infant car bed (A) is a special bed made for use A rear-facing infant restraint (B) positions an infant motor vehicle. It’s infant restraint system to face the rear of the vehicle. Rear-facing infant designed to restrain or position a child on a restraints are designed for infants of up to about continuous flat surface.
Page 97 1-84...
Page 98 A forward-facing child restraint (C-E) positions a child upright to face forward in the vehicle. These forward-facing restraints are designed to help protect children who are from 20 to 40 lbs. (9 to and about 26 to 40 inches (66 to 102 cm) in height, or up to around four years of age.
Page 99 When choosing a child restraint, be sure the child restraint is designed to be used in a vehicle. If it is, it will have a label saying that it meets Federal Motor Vehicle Safety Standards. Then follow the instructions for the restraint. You may find these instructions on the restraint itself or in booklet, or both.
Page 100 Where to Put the Restraint (Cargo Vans) The child restraint must be secured properly in the passenger seat. Never put a rear-facing child restraint in this vehicle. Here’s why: A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger’s air bag inflates, even though your vehicle has reduced-force frontal air bags.
Page 101 Chevrolet dealer 60140 positions are located just above the place where the third put it for you.
Page 102 You’ll be using the lap-shoulder belt. See the earlier part Securing a Child Restraint in a Rear about the top strap if the child restraint has one. Be sure Outside Seat Position to follow the instructions that came with the child restraint.
Page 103 3. Buckle the belt. Make sure the release button is 4. Pull the rest of the shoulder belt all the way out of positioned so you would be able to unbuckle the the retractor to set the lock. safety belt quickly if you ever had to. 1-90...
Page 104 To remove the child restraint, just unbuckle the vehicle’s safety belt and let it go back all the way. The safety belt will move freely again and be ready to work for an adult larger child passenger. Securing a Child Restraint in the Center Seat Position (Third Row Bench Seat) To tighten the belt, feed the shoulder belt back into the retractor while you push down on the child...
Page 105 See the earlier part about the top strap if the child restraint has one. Buckle the belt. Make sure the release button positioned so you would be able to unbuckle the safety belt quickly if you ever had to. 1. Make the belt as long as possible by tilting the latch To tighten the belt, pull its free end while you push plate and pulling along the belt.
Page 106 Secure the child in the child restraint when and as the 6. Push and pull the child restraint in different instructions say. directions to be sure it is secure. To remove the child restraint, just unbuckle the vehicle’s 1. Put the restraint on the seat. safety belt.
Page 107 4. Buckle the belt. Make sure the release button is 5. To tighten the belt, feed it back into the retractor positioned so you would be able to unbuckle the while you push down on the child restraint. If you’re safety belt quickly if you ever had to.
Page 108 To remove the child restraint, just unbuckle the vehicle’s safety belt and let it go back all the way. The safety belt move will freely again and be ready to work for an adult or larger child passenger. in a A child rearfacing child restraint can be Securing...
Page 109 You'll be using the lap-shoulder belt. See the earlier part about the top strap if the child restraint has one. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say.
Page 110 6. To tighten the belt, feed the shoulder belt back into the 5. Pull the rest of the shoulder belt all the way out of retractor while you push down on the child restraint. retractor set the lock. You may find it helpful to use your knee to push down on the child restraint as you tighten the belt.
Page 111 Larger Children have the choice, a child should sit next to a window so the child can wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide. Accident statistics show that children are safer if they are restrained in the rear seat.
Page 112 Never do this. Here two children are wearing the same belt. The belt can’t properly spread the impact forces. In a crash, the two children can be crushed together and seriously injured. A belt must be used by only one person at a time. What a child is wearing a lap-shoulder belt, but the child is so small that the shoulder belt is...
Page 113 CAUTION: Never do this. Here a child is sitting in seat that has a lap-shoulder belt, but the shoulder part is behind way, the child. If the child wears the belt in this a crash the child might slide under the belt. The belt’s force would then be applied right on the child’s abdomen.
Page 114 Checking Your Restraint Systems Safety Belt Extender If the vehicle’s safety belt will fasten around you, you Now and then, make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors and should use it. anchorages are working properly. If your vehicle has a But if a safety belt isn’t long enough to fasten, your built-in child restraint, also periodically make sure the dealer will order you an extender.
Page 115 Replacing Restraint System Parts If safety belts or built-in child restraint harness straps are cut or damaged, replace them. Collision damage also After a Crash may mean you will need to have safety belt, built-in child restraint or seat parts repaired or replaced. New If you’ve had a crash, do you need new safety belts or parts and repairs may be necessary even if the safety belt built-in child restraint parts?
Page 116 NOTES 1-103...
Page 117 NOTES 1-104...
Page 118 Section 2 Features and Controls Here you can learn about the many standard and optional features on your vehicle, and information on starting, shifting and braking. Also explained are the instrument panel and the warning systems that tell you if everything is working properly and what to do if you have a problem.
Page 119 Keys CAUTION: Leaving young children in a vehicle with the ignition key is dangerous for many reasons. A child or others could be badly injured or even killed. They could operate power windows or other controls or even make the vehicle move. Don't leave the keys in a vehicle with young children.
Page 120 So be sure you have an extra key. If you need a new key, contact your Chevrolet dealer, who can obtain the correct key code. In an emergency, call Chevrolet Roadside Assistance at 1-800-CHEV-USA (1-800-243-8872). (In Canada,...
Page 121 Door Locks There are several ways lock and unlock your vehicle. From the outside, use your key or the remote keyless entry transmitter (if your vehicle has this option). CAUTION: Unlocked doors can be dangerous. Passengers especially children can easily open the doors and fall out.
Page 122 Power Door Locks To lock either front door from the inside, push the locking lever forward. From the inside, press the front of the power door lock To unlock either front door from the inside, pull back switch (on either front door) to unlock all doors and the locking lever.
Page 123 lock all doors and the liftgate from the inside Automatic Door Locks by pressing the rear of the power lock switch on either All of the doors will lock automatically when you move front door. If your vehicle is equipped with the Content your shift lever out of PARK (P).
Page 124 Lockout Deterrent Five seconds after the last door is closed, all the doors will lock. You can lock the doors immediately by The Lockout Deterrent feature makes it difficult for you using the power door lock switch or the remote to lock your keys in your vehicle.
Page 125 Keyless Entry System (Option) This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: your vehicle has this option, you can lock and (1) this device may not cause interference, and (2) this unlock your doors or unlock your liftgate from about device must accept any interference received, including 3 feet (1 m) up to 30 feet (9 m) away using the remote interference that may cause undesired operation of...
Page 126 Remote Lock Confirmation Operation When you use the remote keyless entry transmitter to Remote Driver’s Door and All Door Unlock lock your vehicle, your parking lamps will flash briefly When you press UNLOCK on the remote keyless entry to let you know the command has been received. If you transmitter, only the driver’s door will unlock.
Page 127 Each remote keyless entry transmitter is coded to If you have the optional prevent another transmitter from unlocking your vehicle. power sliding door (see If a transmitter is lost or stolen, a replacement can be “Power Sliding Door” purchased through your dealer. Remember to bring any LOCK later in this section), your remaining transmitters with you when you go to your...
Page 128 Replacing the Battery in the NOTICE: Remote Transmitter I . Insert a flat object like a dime into the slot on the side When replacing the battery, use care not to of the transmitter and twist to separate the halves. touch any of the circuitry.
Page 129 that are on your vehicle. It is useful to become familiar 5. Check the transmitter operation. If needed, follow the instructions on resynchronizing your remote with them since they are used frequently while transmitter. operating the vehicle. Overhead Console Switchbank Resynchronizing Your Remote Transmitter Your remote keyless entry system uses a continually changing code for increased security.
Page 130 Sliding Door Instrument Panel Switchbank To open the sliding door from outside the vehicle, pull the handle out and then pull the door toward the rear. If you slide the door all the way back, the door will rest in a detent position.
Page 131 Sliding Door Lock Power Sliding Door (Option) With this option, you can open and close the sliding door with the switches inside your vehicle. If you have the optional remote keyless entry system, you can also operate the power sliding door with your remote transmitter.
Page 132 To operate the power sliding The power sliding door override switch will also stop the door immediately, while the door is opening or door, the power sliding door closing, when the override feature is enabled. override switch must be disabled. This switch is located in the overhead NOTICE: console switchbank.
Page 133 When the key is in the ignition in RUN, the power sliding door will only open if the transaxle is in PARK (P). The transaxle does not have to be in PARK (P) to close the door. If the override feature is not enabled and the power sliding door is open or in the process of closing when you shift out of PARK (P), a buzzer will sound.
Page 134 You or others could be injured if caught in the path of the sliding door. Make sure the door path is clear before closing the door. To manually open the power sliding door when the power sliding door override feature is disabled, pull the inside or outside handle and let go.
Page 135 TIf your vehicle is facing downward on a steep grade (15 percent or more), the door may not stay open and could slam shut, possibly injuring someone. To make sure the door does not slam shut, turn on the power sliding door feature. Then if the door closes, it will close under the control the power door system.
Page 136 Resetting the Power Sliding Door 7. Push either of the power door buttons to open the power sliding door. The power sliding door may operate incorrectly or not at all because of the following conditions: 8. Wait five seconds and close the door by pushing either power door button.
Page 137 To use the security lock, You should let adults and older children know how the move the security lock lever security lock works, and how to cancel the lock. If you all the way up and close the don’t, adults or older children who ride in the rear won’t door from the outside.
Page 138 A light on your instrument panel will warn you if the NOTICE: liftgate is not completely closed (see “Door Ajar Warning Light” in the Index). Be sure there are no overhead obstructions, such as a garage door, before you open the liftgate. You could slam the liftgate into something and break the glass.
Page 139 Put your valuables in a storage area, like your glove box. When you park your Chevrolet and open the driver’s door, you’ll hear a chime reminding you to remove Lock all the doors except the driver’s. your key from the ignition and take it with you.
Page 140 Content Theft-Deterrent (Option) Once armed, the alarm will go off if someone tries to enter the vehicle (without using the remote keyless entry If your vehicle has this option, it has a theft-deterrent transmitter or a key), breaks a window, tries to damage alarm system.
Page 141 Arming with the Remote Keyless Arming Confirmation Entry Transmitter If remote unlock confirmation is on (see “Locks and Lighting Choices” in the Index), your parking lamps Your alarm system will arm when you use your remote will flash briefly to let you know when your alarm keyless entry transmitter to lock the doors, if the key is system has armed.
Page 142 New Vehicle 4LBreak-In’’ Nuisance Alarms If you experience nuisance alarms (alarms which are not caused by the opening of a door or the liftgate and NOTICE: are not desirable), you may need to reduce the damage detection sensitivity. Try programming the Content Your vehicle doesn’t need an elaborate Theft-Deterrent to Mode 1.
Page 143 Ignition Positions LOCK (B): This is the only position in which you can remove the key. This locks your steering wheel, ignition With the ignition key in the ignition switch, you can turn and transaxle. the switch to five positions. OFF (C): This position unlocks the steering wheel, ignition and transaxle, but does not send electrical power to any accessories.
Page 144 NOTICE: NOTICE: Don’t try to shift to PARK (P) if your Chevrolet If your key seems stuck in LOCK and you can’t is moving. If you do, you could damage the turn it, be sure you are using the correct key; if transaxle.
Page 145 2. If it doesn’t start right away, hold your key in NOTICE: START. If it doesn’t start in three seconds (or starts but then stops), push the accelerator pedal about one-quarter of the way down for 12 more seconds, Your engine is designed to work with the or until it starts.
Page 146 3. Plug it into a normal, grounded 110-volt AC outlet. Engine Coolant Heater (If Equipped) C. [JTIO Plugging the cord into ungrounded outlet could cause an electrical shock. Also, the wrong kind of extension cord could overheat and cause a fire. You could be seriously injured. Plug the cord into a properly grounded three-prong 110-volt AC outlet.
Page 147 Automatic Transaxle Operation If you cannot shift out of PARK (P), ease pressure on the shift lever push the shift lever all the way into There are several different positions for your shift lever. PARK (P) as you maintain brake application. Then move the shift lever into the gear you wish.
Page 148 (R): Use this gear to back up. REVERSE NOTICE: Shifting out of PARK or NEUTRAL (N) while your engine is “racing” (running high Shifting to REVERSE while your vehicle is speed) is dangerous. Unless your foot is firmly on moving forward could damage your transaxle. the brake pedal, your vehicle could move very Shift to REVERSE (R) only after your vehicle rapidly.
Page 149 AUTOMATIC OVERDRIW (D): This position is SECOND (2): This position gives you more power, but lower fuel economy. You can use SECOND (2) on hills. for normal driving. If you need more power for passing, and you’re: It can help control your speed as you go down steep mountain roads, but then you would also want to use Going less than 35 mph (55...
Page 150 FIRST (1): This position gives you even more power NOTICE: (but lower fuel economy) than SECOND (2). You can use it on very steep hills, or in deep snow or mud. If the selector lever is put in FIRST (l), the transaxle If your vehicle seems to start up rather slowly, won’t downshift into f i s t gear until the vehicle is or if it seems not to shift gears as...
Page 151 To release the parking brake, hold the regular brake Parking Brake pedal down with your right foot while you push down on the parking brake pedal with your left foot. (To set the parking brake, *:>: release the tension on the parking brake cable, you will hold the regular brake pedal down with your right...
Page 152 2. Move the shift lever into the PARK (P) position Shifting Into PARK (P) like this: CAL J O N : can be dangerous to get out of your vehicle if the shift lever is not fully in PARK with the parking brake firmly set.
Page 153 Leaving Your Vehicle With the Engine Running It can be dangerous to leave your vehicle with the engine running. Your vehicle could move suddenly if the shift lever is not fully in PARK set. with the parking brake firmly And, if you leave the vehicle with the engine running, it could overheat and even catch fire.
Page 154 Torque Lock Shifting Out of PARK (P) If you are parking on a hill and you don’t shift your Your vehicle has a Brake-Transaxle Shift Interlock transaxle into PARK (P) properly, the weight of the (BTSI). You have to fully apply your regular brakes vehicle may put too much force on the parking pawl in before you can shift from PARK (P) when the ignition the transaxle.
Page 155 Eng'qe Exhaust Parking Over Things That Burn Engine exhaust can kill. I t contains the gas carbon monoxide (CO), which you can't see or smell. It can cause unconsciousness and death. You might have exhaust coming in if: Your exhaust system sounds strange or different.
Page 156 Running Your Engine While CAUTION: You’re Parked It’s better not to park with the engine running. But if It can be dangerous to get out of your vehicle if ever you have to, here are some things to know. the shift lever is not fully in PARK with the parking brake firmly set.
Page 157 Locks and Lighting Choices Your vehicle’s locks and lighting systems can be programmed with several different features. The features you can program depend on the options that came with your vehicle. The following chart shows the features that can be programmed.
Page 158 Delayed Illumination and Exit Lighting Entering Programming Mode With Delayed Illumination, the interior lamps will stay To program features, your vehicle must be in the on for about 25 seconds after all the doors and the programming mode. Follow these steps: liftgate are closed.
Page 159 Mode 4: Both Features On (This combines Modes 2 Automatic Door Locks and 3.) With Automatic Door Locks, all doors will Vehicles are delivered programmed in Mode 4. automatically lock when you shift out of PARK (P) and automatically unlock when the ignition is turned to OFF. To change the mode: To customize these features to your preference, see 1.
Page 160 Mode 4: Automatic Unlocking with Transaxle in Last Door Closed Locking and PARK (P) Lockout Prevention Shift into PARK (P) with the ignition on; all doors With the Last Door Closed Locking and Lockout will unlock automatically. Prevention features, your vehicle will do the following: of PARK Shift out with the ignition on and the...
Page 161 Programmable Modes 2. Press UNLOCK on the power door lock switch. Your vehicle can be programmed to one of the 3. Count the number of chimes you hear. The following modes. number of chimes tells you which mode your vehicle is in. You can change the mode by pressing Mode 1 : Both Features Off (Doors will always lock UNLOCK again.
Page 162 Programmable Modes 4. Repeat Step 2 until you hear the number of chimes that matches the mode you want. Your vehicle can be programmed to one of the The mode you selected is now set. You can either exit following modes. the programming mode by following the instructions Mode 1: Remote All Doors Unlock (When you press later in this section or program the next feature available...
Page 163 Programmable Modes When you use the remote keyless entry transmitter to unlock your vehicle or operate your power Your vehicle can be programmed to one of the sliding door (if equipped), your parking lamps following modes. will flash briefly to let you know the command has Mode 1: Both Features Off (Remote lock and unlock been received.
Page 164 3. Count the number of chimes you hear. The number Programmable Modes of chimes tells you which mode your vehicle is in. Your vehicle can be programmed to one of the You can change the mode by pressing the LOCK following modes.
Page 165 To change the mode: Arming and Disarming the - ~ - Theft-Deterrent System 1. Follow the instructions for “Entering Programming Mode” listed previously. and disarm the Content Theft-Deterrent system, the system must be turned on by using Modes 1 , 2 or 4 2.
Page 166 NOTE: While this mode provides increased security, Programmable Modes entry it can be a problem if your remote keyless Your vehicle can be programmed to one of the transmitter is damaged, lost or if it fails to operate for following modes. any reason while the Content Theft-Deterrent system O f f Mode 1: Power Door Lock Switch Arming...
Page 167 6. Remove your key from the door key cylinder. To change the mode: 1. Follow the instructions for “Entering Programming The mode you selected is now set. You can either exit Mode” listed previously. the programming mode by following the instructions later in this section or program the next feature 2.
Page 168 Power Windows (Option) To activate the auto-down feature, push the switch all the way down, then release. The window will lower completely. To stop the window from lowering all the way, pull up the front of the switch. To raise the window, pull up the front of the switch. Side Window Latches The rear of each side window swings open.
Page 169 Power Rear Quarter Windows Horn (If Equipped) You can sound the horn by pressing the horn symbols on your steering wheel. This button, located in the Tilt Wheel overhead console switchbank, is used for A tilt steering wheel allows you to adjust the steering opening and closing the wheel before you drive.
Page 170 Turn and Lane Change Signals Thrn SignaVMultifunction Lever To signal a lane change, just raise or lower the lever The lever on the left side of the steering column until the arrow starts to flash. Hold it there until you includes your: complete your lane change.
Page 171 If a bulb is burned out, replace it to help avoid an Headlamp High/Low Beam Changer accident. If the arrows don’t go on at all when you To change the headlamps from high to low beam, or low signal a turn, check for burned-out bulbs and check the to high, simply pull the turn signal lever all the way fuse (see “Fuses and Circuit Breakers”...
Page 172 Windshield Washer For a delayed wiping cycle, you can set the wiper speed for a long or short delay between wipes. This can be To wash your windshield, press and hold the windshield very useful in light rain or snow. Turn the band to washer paddle.
Page 173 Rear Window Washer/ Wiper Cruise Control (Option) With cruise control, you can maintain a speed of about The rear window wiper - switch is located in 25 mph (40 or more without keeping your foot km/h) on the accelerator. This can really help on long trips. the instrument panel switchbank.
Page 174 If your vehicle is in cruise control when the optional traction control system begins to limit wheel spin, the cruise control will automatically disengage. (See “Traction Control System” in the Index.) When road conditions allow you to safely use it again, you may turn the cruise control back on.
Page 175 Increasing Speed While Using Cruise Control Resuming a Set Speed There are two ways to go to a higher speed: Suppose you set your cruise control at a desired speed of course, shuts off and then you apply the brake. This, Use the accelerator pedal to get to the higher speed.
Page 176 Reducing Speed While Using Cruise Control Using Cruise Control on Hills There are two ways to reduce speed while using How well your cruise control will work on hills depends cruise control: upon your speed, load and the steepness of the hills. When going up steep hills, you may have to step on the Push in the SET button at the end of the lever until accelerator pedal to maintain your speed.
Page 177 Exterior Lamps Turning the dial to this setting turns on the headlamps, together with: Parking Lamps Sidemarker Lamps Taillamps Instrument Panel Lights off all the lamps Turning the dial to this setting turns and lights. Lamps On Reminder If the driver’s door is opened and you turn the ignition to OFF or LOCK while leaving the lamps on, you will hear a warning chime.
Page 178 To idle your vehicle with the DRL or exterior lamps Daytime Running Lamps off, set the parking brake while the ignition is in Daytime Running Lamps (DRL) can make it easier or LOCK. Then start the vehicle. The DRL will stay off for others to see the front of your vehicle during the until you release the parking brake.
Page 179 Interior Lamps Override Switch Illuminated Entry With illuminated entry, the interior of your vehicle is This switch is located in illuminated so you can see inside before you enter your the overhead console vehicle. The lamps will come on for 40 seconds if you switchbank.
Page 180 Delayed Illumination Exit Lighting With exit lighting, the interior lamps will come on for The delayed illumination feature will continue to about 25 seconds whenever you remove the key from illuminate the interior for 25 seconds after all doors the ignition switch. If you turn the ignition switch to have been closed so that you can find your ignition RUN or ACCESSORY, the lamps will fade out.
Page 181 Front Reading Lamps Rear Reading Lamps There are two reading lamps in the third row headliner, above the outboard seating positions. If your vehicle does not have dual sliding doors, there is also a reading lamp in the second row on the driver’s side. To turn on either reading lamp, press the lamp lens.
Page 182 Battery Saver Power Remote Control Mirrors Your vehicle has a feature to help prevent you from The control on the driver’s draining the battery, in case you accidentally leave the door controls both outside on. If interior or underhood lamps you leave any of rearview mirrors.
Page 183 Both outside mirrors can be folded forward or rearward. Storage Compartments the rearward position, they will fold almost flush with Your vehicle’s large carrying capacity can store many the vehicle. This feature is particularly useful items. If you have the extended wheelbase version, you automatic car washes.
Page 184 Compact Overhead Console Overhead Console (If Equipped) The front overhead console includes two reading lamps, a storage compartment and a switchbank. To turn either reading lamp on or off, press the The optional front overhead console has reading lamps, lamp lens. a switchbank, storage compartments, including one for your garage door opener and another one for your The switchbank has switches for the optional Power...
Page 185 Reading Lamps To turn either reading lamp on or off, press the lamp lens. Garage Door Opener Compartment You can store your garage door opener in the rear compartment of your overhead console, and operate it from this position. To install your garage door opener, follow these instructions: 1.
Page 186 Sunglasses Storage Compartment 5 . Add one peg at a time until your garage door opener operates with the compartment door closed when To open the sunglasses storage compartment in the you press the button. overhead console, press the release button. Then pull the compartment down to the full open position.
Page 187 Removing and Replacing the Tray Cupholders There are cupholders on the inboard side of the front passenger’s seat and the right side of the second row bench seat. the cupholders, simply pull down the tray. Keep the trays up when not in use. Your vehicle has storage compartments and cupholders on either side of the vehicle, next to the third row seats.
Page 188 Front Seat Storage Net The dividers in the tray can be removed by squeezing the plastic tabs on the bottom of the dividers, while pulling up. Replace the dividers by sliding them down until the tabs click into place. To replace the tray, line up the guiaes on the bottom of the tray with the guide rails in the storage bin door.
Page 189 Attach the upper loops to the posts on either side of the Rear Storage Compartments liftgate opening (the label on the net should be in the and Cupholders upper left-hand corner). Attach the lower hooks to the Your vehicle has a storage compartment and cupholder metal rings on the floor.
Page 190 The cargo net has a maximum capacity of 100 lbs. (45 kg). It is not designed to hold larger, heavier loads. Store such loads on the floor of your vehicle, as far forward as you can. When not in use, it is recommend that you take down the cargo net to extend its life and retain its elasticity, and to keep the rear exit clear.
Page 191 Lu y e Carrier (0 'ion) 4UTION: If you try to carry something on top of your vehicle that is longer wider than the luggage carrier like paneling, plywood, a mattress, and so forth the wind can catch it as you drive along.
Page 192 Don't exceed the maximum vehicle capacity when loading your vehicle. For more information on vehicle capacity and loading, see "Loading Your Vehicle" in the Index. To prevent damage or loss of cargo as you're driving, check now and then to make sure the luggage carrier and cargo are still securely fastened.
Page 193 Use the adjustable tie-down loops in the side rails to help secure large loads. Reposition the tie-downs by turning them to the left, then slide them along the side rail. Turn the tie-downs to the right to tighten them in place. Bumper strips on the luggage carrier crossrails help to Lift the end of the bumper strip with flathead screw...
Page 194 Ashtray and Cigarette Lighter The ashtray and cigarette lighter are located in the middle section of the instrument panel, below the switchbank. Pull out the drawer to use the ashtray. To remove the ashtray for cleaning, grasp the edge of the ashtray with your fingertips and pull up and out, in a rocking motion.
Page 195 Visor Vanity Mirrors NOTICE: Pull down the sun visor. Flip up the cover to expose the vanity mirror. Don’t put papers and other things that burn Illuminated Visor Vanity Mirrors into your ashtrays. If you do, cigarettes or (If Equipped) other smoking materials could set them on fire, causing damage.
Page 196 inflator is located in the rear compartment on the driver’s side. To remove the cover, pull the tab on the cover and pull it off. Inflating something too much can make it explode, and you or others could be injured. Be sure to read the inflator instructions, and inflate any object only to its recommended pressure.
Page 197 has the pressure gage, Then attach that end of the hose Accessory Power Outlet to the object you wish to inflate. Remove the protective cap covering the outlet. Attach the other end of the hose the outlet. Press the ON switch. The ON switch will work even with the ignition off.
Page 198 The power outlets can be used to plug in electrical NOTICE: equipment such as a cellular telephone, CB radio, etc. Follow the proper installation instructions that are included with any electrical equipment you install. When using the accessory power outlet: When not in use, always cover the rear outlet with the Maximum load of any electrical equipment protective cap.
Page 199 Instrument Panel 2-82...
Page 200 Your instrument panel is designed to let you know at a glance how your vehicle is running. You’ll know how fast you’re going, how much fuel you’re using, and many other things you’ll need drive safely and economically. Refer to the accompanying diagram of your instrument panel to locate the components listed below. A.
Page 201 Instrument Panel Cluster Your cluster includes indicator warning lights and gages that are explained on the following pages. 2-84...
Page 202 Trip Odometer Speedometer and Tamper Resistant (1 meter . ’ Your speedometer lets you see your speed in both miles per hour (mph) and kilometers per hour Your (km/h). odometer shows how far your vehicle has been driven, in either miles (used in the United States) or kilometers (used in Canada).
Page 203 Warning Lights, Gages When one of the warning lights comes on and stays when you are driving, or when one of the gages shows and Indicators there may be a problem, check the section that tells you what to do about it. Please follow this manual’s advice. This part describes the warning lights and gages that Waiting to do repairs can be costly and even...
Page 204 Air Bag Readiness Light Charging System Indicator Light There is an air bag readiness light on the instrument The charging system light panel, which shows a deployed air bag. The system will come on when you turn checks the air bag’s electrical system for malfunctions. on the ignition as a check to The light tells you if there is an electrical problem.
Page 205 If the light comes on while you are driving, pull Your vehicle’s hydraulic brake system is divided into off the two parts. If one part isn’t working, the other part can road and stop carefully. You may notice that the pedal is still work and stop you.
Page 206 Ani- ?ck Brake System Warning Light CAUTION: With the anti-lock brake system, this light will Your regular brake system may not be working come on when you start properly if the anti-lock brake system warning your engine and it will stay on for three seconds.
Page 207 Traction Control System Warning The traction control system warning light may come on for the following reasons: Light (Option) If there’s a brake system problem that is specifically This warning light should related to traction control, the traction control system come on briefly as you start will turn off and the warning light will come the engine.
Page 208 Engine Coolant Temperature Gage Low Traction Light (Option) If your vehicle has the traction control system, there will be a LOW TRACTION light on TRACTION the instrument panel. When your anti-lock system is adjusting brake pressure to help avoid a braking skid, or when your traction control system is limiting wheel spin, the LOW United States Canadian...
Page 209 Engine Temperature Warning Light Low Coolant Light This light will come on If this light comes on, when your engine gets your system is low on too hot. coolant and the engine may overheat. If this light comes on, it means that your engine coolant See “Engine Coolant”...
Page 210 Malfunction Indicator Lamp NOTICE: (Service Engine Soon Light) If you keep driving your vehicle with this light on, after a while, your emission controls may not SERVICE work as well, your fuel economy may not be ENGINE good and your engine may not run as smoothly.
Page 211 If the Light Is Flashing If so, reinstall the fuel cap, making sure to fully install the cap. The diagnostic system can determine if the fuel The following prevent more serious damage to cap has been left off or improperly installed. A loose or your vehicle: missing fuel cap will allow fuel to evaporate into the Reducing vehicle speed.
Page 212 This will be detected by the system and cause the light to turn on. If you experience one or more of these conditions, will change the fuel brand you use. It require at least one pressure is low. If Don’t keep driving if the full tank of the proper fuel to turn the light off.
Page 213 Low Oil Level Light Power Sliding Door Warning Light ' This light will come on if If this light comes on, it means your engine is low the power sliding door is on oil. not completely closed and the ignition is turned to i ill RUN or START.
Page 214 It takes a little more or less fuel to fill up than the gage Gage indicated. For example, the gage may have indicated tank was half Eull, but it actually took a little more less than half the tank‘s capacity to fill the tank.
Page 215 Mode Button (MODE): Press this button to cycle Driver Information Center (DIC) Off, through three modes of operation (Option) CompassfI'emperature and Trip Computer mode. MODE In the Trip Computer mode, pressing the button cycles through the five displays. Press the MODE button after the last Trip Computer display to return the DIC to the mode.
Page 216 Setting the Variance The display will show all the display segments for half a second to acknowledge the change in zone number. Automatic Compass Calibration The compass is self-calibrating which eliminates the need to manually set the compass. When the vehicle is new, the calibration process may not be complete.
Page 217 Error Displays Trip Range (RANGE): This shows the estimated distance that can be traveled with the remaining fuel. An error of the vehicle’s speed sensor or fuel sender The fuel economy used to calculate range is based on will cause to be displayed.
Page 218 NOTES 2-101...
Page 219 NOTES 2-102...
Page 220 Section 3 Comfort Controls and Audio Systems In this section, you’ll find out how to operate the comfort control and audio systems offered with your vehicle. Be sure to read about the particular systems supplied with your vehicle. AM-FM Stereo with Cassette Tape Player and 3-15 Comfort Controls Automatic Tone Control (If Equipped)
Page 221 Temperature Knob Comfort Controls The center knob controls the temperature of the This section tells you how to make your air system work coming through the system. Turn it to the left (toward for you. Your comfort control system uses the blue area) for cooler air.
Page 222 Air Conditioning DEFOG: This setting directs air to the windshield On very hot days, your vehicle will cool down more and through the floor ducts. This mode is particularly quickly and economically if you open the windows long useful during cold or inclement weather because of your enough to let hot, inside air escape.
Page 223 Heating Defogging and Defrosting To rapidly defrost the windshield, turn the temperature Turn the temperature knob to the right (toward the red area) to warm the air. control knob all the way to the right (to the red area) and turn the mode knob to DEFROST.
Page 224 Do not attach a temporary vehicle license across the Rear Window Defogger (If Equipped) defogger grid on the rear window. Press REAR (the light will glow) to warm the defogger NOTICE: grid on the rear window. Don’t use a razor blade or something else sharp on the inside of the rear window.
Page 225 Rear Climate Control (If Equipped) Rear Fan Control This option comes with the rear climate controls. If you have the optional rear climate control, the rear seat passengers can control the temperature and the Please keep the area around the base of the center amount of air directed to the rear of the vehicle.
Page 226 Rear Comfort Controls Turn the temperature knob to the left (to the blue area) for cooler air, or to the right (to the red area) for The rear climate control knobs are in a panel next to the warmer air. second row seat.
Page 227 Rear Air Vents Ventilation System To maximize airflow through the rear heater outlet, Your vehicle’s flow-through ventilation system supplies place the left bucket seat the second row in the outside air into the vehicle when it is moving. Outside forward position (see “Adjusting Rear Seats” in is running.
Page 228 Ventilation Tips Audio Systems Keep the hood and front air inlet free of ice, snow or Your Delco Electronics audio system has been designed other obstruction (such as leaves). This will to operate easily and give years of listening pleasure. allow the heater and defroster to work much better, You will get the most enjoyment out of it if you acquaint reducing the chance of fogging the inside of...
Page 229 AM-FM Stereo Finding a Station AM-FM: Press the lower knob to switch between The display shows your selection. F M . TUNE: Turn the lower knob choose radio stations. SEEK: Press the right or left arrow to go to the next higher or lower station and stay there.
Page 230 4. Press SET. (SET will appear on the display.) Setting the Tone Press and hold one of the four numbered buttons, BASS: Slide the lever up or down to increase or within five seconds. The sound will mute. When it decrease bass.
Page 231 Finding a Station AM-FM Stereo with Cassette Tape Player (If Equipped) AM-FM: Press the lower knob to switch between AM, FM1 and FM2. The display shows your selection. TUNE: Turn the lower knob to choose radio stations. SEEK: Press the right or left arrow to go to the next higher or lower station and stay there.
Page 232 In addition to the four stations already set, up to three Setting the Tone more stations may be preset on each band by pressing BASS: Slide the lever up or down to increase or two adjoining buttons at the same time. Just: decrease bass.
Page 233 While the tape is playing, use the VOL, FADE, BAL, CD Adapter Kits BASS and TREB controls just as you do for the radio. It is possible to use a CD adapter kit with your cassette Other controls may have different functions when a tape tape player after activating the bypass feature your...
Page 234 S C V AM-FM Stereo with Cassette Tape Player Your system has a feature called Speed-Compensated-Volume (SCV). With SCV, your and Automatic Tone Control (If Equipped) audio system adjusts automatically to make up for road and wind noise as you drive. Set the volume at the desired level.
Page 235 SCAN: Press one of the SEEK arrows for two seconds, P.SCAN: Press this button to listen to each of your and SCAN will appear in the display. Use SCAN favorite stations stored on your pushbuttons for a few listen to stations for a few seconds. The radio will go to of the stations seconds.
Page 236 Push these knobs back into their stored positions when Playing a Cassette Tape you’re not using them. Your tape player is built to work best with tapes that are AUTO TONE: This feature allows you to choose preset 30 to 45 minutes long on each side. Tapes longer than that are so thin they may not work well in this player.
Page 237 PREV (1): Press this button or the left SEEK arrow to go (5): Press this button to reduce background noise. to the previous selection on the tape if the current selection on the Note that the double-D symbol wdl appear display.
Page 238 AM-FM Stereo with Compact Disc Player CLN: If this message appears on the display, the cassette tape player needs to be cleaned. It will still play and Automatic Tone Control (If Equipped) tapes, but you should clean it as soon as possible to prevent damage to the tapes and player.
Page 239 SCV: Your system has a feature called SCAN: Press one of the SEEK arrows for two seconds, Speed-Compensated-Volume (SCV). With SCV, your and SCAN will appear on the display. Use SCAN to audio system adjusts automatically to make up for road listen to stations for a few seconds.
Page 240 P.SCAN: Press this button to listen to each of your Push these knobs back into their stored positions when favorite stations stored on your pushbuttons for a few you’re not using them. seconds. The radio will scan through each of the stations AUTO TONE: This feature allows you to choose preset stored on your pushbuttons, except those stations with bass and treble equalization settings designed for...
Page 241 Playing a Compact Disc (2): Press this button to hear the tracks in random, rather than sequential, order. RANDOM will show Insert a disc partway into the slot, label side up. The the display. Press RDM again to turn off random play. player will pull it in.
Page 242 Rear Seat Audio (If Equipped) AM-FM: Press this button to play the radio when a disc is in the player. The letters CD will go off the display. CD AUX: Press this button to change to the disc function when the radio is on. A CD icon will appear on the display when the disc is in the player, whether it is active or not.
Page 243 PWR: Press this AM-FM button to turn the rear seat audio system If your vehicle is equipped with the Stereo with on or off. The rear speakers will be muted when the power Compact Disc Player and Automatic Tone Control or the is turned on.
Page 244 A disc that has been ejected but is still sitting in the remote CD player will be pulled back into the player after approximately 30 seconds. This protects the disc and player from damage. The disc will not start playing. To remove the disc, press the EJECT button and remove the disc from the player.
Page 245 PREV (1): RECALL: Press this button to see what track is Press this button to go back to the currently playing. Press RECALL again within five start the current track if more than eight seconds have seconds to see how long the track has been playing. played.
Page 246 6 . Press MN again to make the last two digits agree When THEFTLOCK is activated, the radio will display with your code. LOC to indicate a locked condition anytime battery power has been interrupted. If your battery loses power 7.
Page 247 5. Press AM-FM after you have confirmed that the 5. Press MN again to make the last two digits agree code matches the secret code you have written down. with your code. The display will show SEC, indicating the radio is 6.
Page 248 To help avoid hearing loss or damage: Understanding Radio Reception Adjust the volume control to the lowest setting. Increase volume slowly until you hear comfortably The range for most AM stations is greater than for FM, and clearly. especially at night. The longer range, however, can cause stations to interfere with each other.
Page 249 Care of Your Cassette Tape Player When using a scrubbing action, non-abrasive cleaning cassette, it is normal for the cassette to eject because tape player that not cleaned regularly can cause your unit is equipped with a cut tape detection feature reduced sound quality, ruined cassettes or a damaged and a cleaning cassette may appear as a broken tape.
Page 250 If your vehicle is equipped with the AM-FM Stereo with After you clean the player, press and hold EJECT for five seconds to reset the CLN indicator. The radio will Cassette Tape Player and Automatic Tone Control: display to show the indicator was reset. 1.
Page 251 Care of Your Compact Disc Player Integrated Windshield Antenna The use of CD lens cleaner discs is not advised, due to The antenna in your vehicle is a very thin, metal layer in the risk of contaminating the lens of the CD optics with the windshield.
Page 252 NOTES...
Page 253 NOTES 3-34...
Page 254 Section 4 Your Driving and the Road Here you’ll find information about driving on different kinds of roads and in varying weather conditions. We’ve also included many other useful tips on driving. Driving in Rain and on Wet Roads Defensive Driving 4-18 4-2 1 City Driving...
Page 255 Drive defensively. the road in a safe place to do them yourself. These simple defensive driving techniques could save Please start with a very important safety device in your your life. Chevrolet: Buckle up. (See “Safety Belts” in the Index.)
Page 256 The obvious way to solve this highway safety problem Drunken Driving is for people never to drink alcohol and then drive. But Death and injury associated with drinking and driving is what if people do? How much is “too much” if the a national tragedy.
Page 257 Since alcohol is carried in body water, this means that a woman generally will reach a higher BAC level than a same man of her same body weight when each has the number of drinks. The law in many U.S. states sets the legal limit at a BAC of 0.10 percent.
Page 258 The body takes about an hour to rid itself of the alcohol in one drink. No amount of coffee or number of cold showers will speed that up. “I’ll be careful” isn’t the right answer. What if there’s an emergency, a need to Drinking and then driving is very dangerous.
Page 259 Braking Control of Vehicle three systems make your vehicle go Braking action involves perceprlon time and have that where They are reaction time. you want brakes, steering three systems accelerator. All have to do their work First, you have to decide to push on the brake pedal. where tires meet the places...
Page 260 - .Lock Avoid needless heavy braking. Some people drive in ‘;es (ABS) spurts heavy acceleration followed by heavy rour vehicle has anti-lock brakes (ABS). ABS is an braking rather than keeping pace with traffic. This is a advanced electronic braking system that will help mistake.
Page 261 The anti-lock system can change the brake pressure faster than any driver could. The computer is programmed to make the most of available tire and road conditions. Here’s how anti-lock works. Let’s say the road is wet. You’re driving safely. Suddenly an animal jumps out in front of you.
Page 262 Traction Control System (If Equipped) Remember: Anti-lock doesn’t change the time you need to get your foot to the brake pedal or always decrease Your vehicle may have a traction control system that stopping distance. If you get too close to the vehicle in limits wheel spin.
Page 263 This light should come To turn the system off, press briefly when you start the TCS symbol the engine. If it stays bottom of the button in the :TCS: on or comes on while you center console switchbank. are driving, there’s a The indicator light on the problem with your traction traction control button will...
Page 264 Suppose you’re steering through a sharp curve. Then you Steering suddenly accelerate. Both control systems steering and Power Steering have to do their work where the tires meet acceleration the road. Adding the sudden acceleration can demand too If you lose power steering assist because the engine much of those places.
Page 265 Steering in Emergencies There times when steering can be more effective than braking. For example, you come over a hill and find a truck stopped in your lane, or a car suddenly pulls out from nowhere, or a child darts out from between parked cars and stops right in front of you.
Page 266 Passing Off-Road Recovery The driver of a vehicle about to pass another on a You may find that your right wheels have dropped off the edge of a road onto the shoulder while you’re driving. two-lane highway waits for just the right moment, accelerates, moves around the vehicle ahead, then goes back into the right lane again.
Page 267 Do not get too close to the vehicle you want to Check your mirrors, glance over your shoulder and pass whde you’re awaiting an opportunity. For one start your left lane change signal before moving out thing, following too closely reduces your area of of the right lane to pass.
Page 268 If your vehicle starts to slide, ease your foot off the Loss of Control accelerator pedal and quickly steer the way you want the Let’s review what driving experts say about what vehicle to go. If you start steering quickly enough, your happens when the three control systems (brakes, steering vehicle may straighten out.
Page 269 Here are some tips on night driving. Driving at Night Drive defensively. Don’t drink and drive. Adjust your inside rearview mirror to reduce the glare from headlamps behind you. Since you can’t see as well, you may need to slow down and keep more space between you and other vehicles.
Page 270 Keep your windshield and all the glass on your vehicle Night Vision clean inside and out. Glare at night is made much No one can see as well at night as in the daytime. But as worse by dirt on the glass. Even the inside of the glass we get older these differences increase.
Page 271 Driving in Rain and on Wet Roads Rain and wet roads can mean driving trouble. On a wet road, you can’t stop, accelerate or turn as well because your tire-to-road traction isn’t as good as on dry roads. And, if your tires don’t have much tread left, you’ll get even less traction.
Page 272 CAUTION: Wet brakes can cause accidents. They won’t work as well in a quick stop and may cause pulling to one side. You could lose control of the vehicle. After driving through a large puddle of water or a car wash, apply your brake pedal lightly until your brakes work normally.
Page 273 Hydroplaning Driving Through Deep Standing Water Hydroplaning is dangerous. So much water can build up under your tires that they actually ride on the water. NOTICE: This can happen if the road is wet enough and you’re going fast enough. When your vehicle is hydroplaning, If you drive too quickly through deep puddles or it has little or no contact with the road.
Page 274 City Driving Here are ways to increase your safety in city driving: Know the best way to get to where you are going. Get a city map and plan your trip into unknown part of the city just as you would for a cross-country trip.
Page 275 Freeway Driving At the entrance, there is usually a ramp that leads to the freeway. If you have a clear view of the freeway as you drive along the entrance ramp, you should begin to check traffic. Try to determine where you expect to blend with the flow.
Page 276 Of course, time to avoid a major storm system? you’ll find experienced and able service experts in Chevrolet dealerships all across North America. They’ll Maps: Do you have up-to-date maps? be ready and willing to help if you need it.
Page 277 Highway Hypnosis Hill and Mountain Roads happen to you! If it does, your vehicle can leave the road in less than a second, and you could crash and be injured. What can you do about highway hypnosis? First, be aware that it can happen. Then here are some tips: Make sure your vehicle is well ventilated, with a comfortably cool interior.
Page 278 If you drive regularly in steep country, or if you’re planning to visit there, here are some tips that can make your trips safer and more enjoyable. Keep your vehicle in good s k -le. Check all fluid Joasting downhill in NEUTRAL or with the levels and also the brakes, tires, cooling system ignition off is dangerous.
Page 279 Include an ice scraper, a small brush or broom, a supply Winter Driving of windshield washer fluid, a rag, some winter outer clothing, a small shovel, a flashlight, a red cloth and reflective warning triangles. And, if you will be driving under severe conditions, include a small bag of sand, a piece of old carpet or a couple of burlap bags to help...
Page 280 What’s the worst time for this? “Wet ice.” Very cold snow or ice can be slick and hard to drive on. But wet ice can be even more trouble because it may offer the least traction of all. You can get wet ice when it’s about freezing (32°F;...
Page 281 Your anti-lock brakes improve your vehicle’s stability If You’re Caught in a Blizzard when you make a hard stop on a slippery road. Even though you have an anti-lock braking system, you’ll want begin stopping sooner than you would on dry pavement.
Page 282 Tie a red cloth to your vehicle to alert police that you’ve been stopped by the snow. extra clothing or wrap a blanket around you. If you have no blankets or extra clothing, make body Snow can trap exhaust gases under your vehicle. insulators from newspapers, burlap bags, rags, floor This can cause deadly CO (carbon monoxide) gas mats -- anything you can wrap around yourself or...
Page 283 Loading Your Vehicle Run your engine only as long as you must. This saves fuel. When you run the engine, make it go a little faster than just idle. That is, push the accelerator slightly. This uses less fuel for the heat that you get and it keeps the battery charged.
Page 284 The Certificatioflire label also tells you the maximum NOTICE: weights for the front and rear axles, called the Gross Axle Weight Rating (GAWR). To find out the actual loads on your front and rear axles, you need to go to a Your warranty does not cover parts or weigh station and weigh your vehicle.
Page 285 people inside as part of your load. If you added any accessories or equipment after your vehicle left the factory, remember to subtract the weight of these things from the payload. You should never exceed the GVWR Things you put inside your vehicle can strike or the GAWR.
Page 286 Towing a Trailer Your vehicle can tow a trailer. To identify what the vehicle trailering capacity is for your vehicle, you should read the information in “Weight of the Trailer” that appears later in this section. But trailering CAUTION: different than just driving your vehicle by itself. Trailering means changes in handling, durability and If you don’t use the correct equipment and drive fuel economy.
Page 287 If You Do Decide To Pull A Trailer Three important considerations have to do with weight: the weight of the trailer, you do, here are some important points: There are many different laws, including speed limit the weight of the trailer tongue restrictions, having to do with trailering.
Page 288 You can your dealer for our trailering information or advice, or you can write us at: Chevrolet Customer Assistance Department P.O. Box 7047 Troy, 48007-7047 In Canada, write to: General Motors of Canada Limited Customer Communication Centre 1908 Colonel Drive...
Page 289 If you’ll be pulling a trailer that, when loaded, will Total Weight on Your Vehicle’s Tires weigh more than 2,000 lbs. (900 kg), be sure to use a Be sure your vehicle’s tires are inflated to the upper properly mounted, weight-carrying hitch and sway limit for cold tires.
Page 290 Driving with a Trailer Safety Chains You should always attach chains between your vehicle and your trailer. Cross the safety chains under the tongue CAUTION: of the trailer so that the tongue wdl not drop to the road if it becomes separated from the hitch. Instructions about safety chains may be provided by the hitch If you have a rearmost window open and you manufacturer or by the trailer manufacturer.
Page 291 Towing a trailer requires a certain amount of experience. Following Distance Before setting out for the open road, you’ll want to get Stay at least twice as far behind the vehicle ahead as you to know your rig. Acquaint yourself with the feel of would when driving your vehicle without a trailer.
Page 292 Trailer Making n r n s Turn Signals When Towing When you tow a trailer, your vehicle has to have extra wiring. NOTICE: The arrows on your instrument panel will flash whenever you signal a turn or lane change. Properly Making very sharp turns while trailering could hooked up, the trailer lamps will also flash, telling other cause the trailer to come in contact with the...
Page 293 Driving On Grades Parking on Hills Reduce speed and shift to a lower gear before you start You really should not park your vehicle, with a trailer down a long or steep downgrade. If you don’t shift attached, on a hill. If something goes wrong, your rig down, you might have to use your brakes so much that could start to move.
Page 294 When You Are Ready to Leave After Maintenance When Trailer Towing Parking on a Hill Your vehicle will need service more often when you’re pulling a trailer. See the Maintenance Schedule for more 1. Apply your regular brakes and hold the pedal down on this.
Page 295 NOTES 4-42...
Page 296 NOTES 4-43...
Page 297 NOTES 4-44...
Page 298 Section 5 Problems on the Road Here you’ll find what to do about some problems that can occur on the road. Hazard Warning Flashers 5 -24 Air Inflator (Option) 5-24 Other Warning Devices Changing a Flat Tire 5-34 Jump Starting Compact Spare Tire Towing Your Vehicle 5-35...
Page 299 Hazard Warning Flashers Your hazard warning flashers button is on top of the steering column. Press the button in to turn on your flashers. Your hazard warning flashers work no matter what position your key is in, and even if the key isn’t in. To turn off the flashers, push the button down and it will pop back up by itself.
Page 300 Jump Starting NOTICE: If your battery has run down, you may want to use another vehicle and some jumper cables to start your Ignoring these steps could result in costly damage vehicle. But please use the following steps listed to to your vehicle that wouldn’t be covered by do it safely.
Page 301 2. Get the vehicles close enough so the jumper cables NOTICE: can reach, but be sure the vehicles aren’t touching each other. If they are, it could cause a ground connection you don’t want. You wouldn’t be able to If you leave your radio on, it could be badly start your vehicle, and the bad grounding could damaged.
Page 302 Your vehicle has a remote positive (+)jump starting terminal. The terminal is under a tethered cap at the Using a match near a battery can cause battery front of the underhood fuse gas to explode. People have been hurt doing this, and relay center.
Page 303 7. Now connect the black negative cable CAUTION: to the good battery’s negative terminal. Fans or other moving engine parts can injure you badly. Keep your hands away from moving parts once the engine is running. 5. Connect the red positive cable to the positive terminal of the vehicle with the dead battery.
Page 304 8. Attach the cable at least 11. Remove the cables in reverse order to prevent 18 inches (45 cm) away electrical shorting. Take care that they don’t touch from the dead battery, each other or any other metal. but not near engine parts that move.
Page 305 Towing Your Vehicle T r y have a GM dealer or a professional towing service tow your vehicle. They can provide the right equipment and know how to tow it without damage. See help avoid injury to you or others: “Roadside Assistance”...
Page 306 NOTICE: If you are using car-carrier equipment, you must A vehicle can fall from a car carrier if it isn’t pull the Electronic Level Control (ELC) fuse, in adequately secured. This can cause a collision, the instrument panel fuse block, before securing serious personal injury and vehicle damage.
Page 307 Front Towing NOTICE: Tow Limits 55 mph (90 km/h), 500 miles (800 km) Your vehicle has front-wheel drive; do not have it Attach T-hook chains in the towed with the front wheels in contact with the front of the wheels into the slots of the front shipping ground or vehicle damage may occur.
Page 308 NOTICE: Do not tow with sling-type equipment or the front bumper system will be damaged. Use wheel-lift or car-carrier equipment. Additional ramping may be required for car-carrier equipment. Use safety chains and wheel straps. Towing a vehicle over rough surfaces could damage a vehicle.
Page 309 Rear Towing NOTICE: A towing dolly must be used under the front wheels when towing from the reay: Do not tow with sling-type equipment or the rear bumper system will be damaged. Use wheel-lift or car-carrier equipment. Additional ramping may be required for car-carrier equipment. safety chains and wheel straps.
Page 310 Engine Overheating NOTICE: You will find a coolant temperature gage on your vehicle’s instrument panel. See “Engine Coolant After driving in the overheated engine protection Temperature Gage” in the Index. You also have a low operating mode, to avoid engine damage, allow coolant level light on your instrument panel.
Page 311 If Steam Is Coming From Your Engine Steam from an overheated engine can burn you badly, even if you just open the hood. Stay away from the engine if you see or hear steam coming from it. Just turn it off and get everyone away from the vehicle until it cools down.
Page 312 If you no longer have the overheat warning, you If No Steam Is Coming From Your Engine can drive. Just to be safe, drive slower for about If you get the overheat warning but see or hear no 10 minutes. If the warning doesn’t come back on, steam, the problem may not be too serious.
Page 313 When you decide it’s safe to lift the hood, here’s what rou’ll see: CAUTION: An electric engine cooling fan under the hood can start up even when the engine is not running and can injure you. Keep hands, clothing and tools away from any underhood electric fan.
Page 314 CAUTION: Heater and radiator hoses, and other engine parts, can be very hot. Don't touch them. If you do, you can be burned. Don't run the engine if there is a leak. If you run the engine, it could lose all coolant. That could cause an engine fire, and you could be burned.
Page 315 NOTICE: CAUTION: Engine damage from running your engine Adding only plain water to your cooling system without coolant isn’t covered by your warranty. can be dangerous. Plain water, or some other liquid like alcohol, can boil before the proper If there seems to be no leak, with the engine on, check to coolant mixture will.
Page 316 NOTICE: ION: In cold weather, water can freeze and crack the can be burned if you spill coolant on hot engine, radiator, heater core and other parts. engine parts. Coolant contains ethylene glycol Use the recommended coolant and the proper and it will burn if the engine parts coolant mixture.
Page 317 CAUTION: Steam and scalding liquids from a hot cooling system can blow out and burn you badly. They are under pressure, and if you turn the radiator pressure cap even little they can come out at high speed. Never turn the cap when the cooling system, including the radiator pressure cap, is hot.
Page 318 How to Add Coolant to the Radiator 2. Then keep turning the pressure cap, but now push down as you turn Remove the pressure cap. 1. You can remove the radiator pressure cap when the cooling system, including the radiator pressure cap and upper radiator hose, is no longer hot.
Page 319 4. Start the engine and let it run until you can feel the 3. Fill the radiator with the proper DEX-COOL@ upper radiator hose getting hot. Watch out for coolant mixture, up to the base of the filler neck. (See “Engine Coolant” in the Index for more engine cooling fans.
Page 320 6. Then replace the pressure cap. At any time during 7. Then fill the coolant recovery tank to the FULL this procedure if coolant begins to out of the flow COLD mark. filler neck, reinstall the pressure cap. Be sure the 8.
Page 321 Changing a Flat Tire If a Tire Goes Flat If a tire goes flat, avoid further tire and wheel damage It’s unusual for a tire to “blow out” while you’re driving, by driving slowly to a level place. Turn on your hazard especially if you maintain your tires properly.
Page 322 l e and Tools The equipment you’ll need is in the storage compartment at the rear of the vehicle, on the passenger’s side. Remove the side convenience nets. Open the jack storage compartment by lifting up the tab and pulling the cover off.
Page 323 EXTENSION RETAINER (CHISEL END) SPARE TIRE IS STORED UNDER INSTRUCTIONS REAR COMPARTMENT FLOOR (VALVE STEM DOWN) JACK & TOOL STORAGE Remove the jack and jacking tools by loosening the The compact spare tire is located under the vehicle, wing nut and bracket. ahead of the rear bumper.
Page 324 €3 The tools you’ll be using include the jack (A), shaft (B) and folding wrench (C). Slide the cable retainer through the center of the spare, then place the compact spare tire near the tire. flat 5-27...
Page 325 Removing the Flat Tire and Installing the Spare Tire If your vehicle has aluminum wheels, use the handle of the folding wrench to pry the large center cap off. Then with the other end of the wrench, loosen the nuts. 2.
Page 326 3. Loosen the wheel 4. Near each wheel, nuts but do not there is a notch in the remove them -- using vehicle’s body. Position the folding wrench. the jack and raise the (Turn the handle about jack head until it fits 6 IN (10 CM.) (15 CM.)
Page 327 Attach the folding wrench to the jack, and CAUT'ON: rotate the wrench to the right to raise the jack Getting under a veh le when it is jacked up is head a few inches. dangerous. If the vehicle slips off the jack, you could be badly injured or killed.
Page 328 Remove any rust or dirt from the wheel bolts, CAUTION: mounting surfaces and spare wheel. Never use oil or grease on studs or nuts. If do, the nuts might come loose. Your wheel could fall off, causing a serious accident. 9.
Page 329 11. Tighten the wheel nuts firmly in a criss-cross sequence, as shown. CAUTION: 10. Lower the vehicle by attaching the folding wheel Incorrect wheel nuts or improperly tightened wrench to the jack and rotating the wrench to the wheel nuts can cause the wheel to become loose left.
Page 330 Storing a Flat or 5 a r e Tire and Tools NOTICE: CAUTION: Improperly tightened wheel nuts can lead to brake pulsation and rotor damage. avoid expensive brake repairs, evenly tighten the wheel Storing jack, a tire other equipment in the nuts in the proper sequence and to the proper passenger compartment of the vehicle could torque specification.
Page 331 Unless you have the plastic “bolt-on” wheel covers, be sure to also store the center cap. When you replace the compact spare with a full-size tire, replace the bolt-on wheel covers and the center cap. Tighten them “hand tight” over the wheel nuts, using the folding wrench. .BAG &...
Page 332 If You’re Stuck: In Sand, Mud, NOTICE: Ice or Snow What you don’t want to do when your vehicle is stuck is When the compact spare is installed, don’t take to spin your wheels too fast. The method known as your vehicle through an automatic car wash with “rocking”...
Page 333 Rocking Your Vehicle To Get It Out NOTICE: First, turn your steering wheel left and right. That will clear the area around your front wheels. If your vehicle Spinning your wheels can destroy parts of your has traction control, you should turn your traction vehicle as well as the tires.
Page 334 NOTES 5-37...
Page 335 NOTES 5-38...
Page 336 Section 6 Service and Appearance Care Here you will find information about the care of your vehicle. This section begins with service and fuel information, and then it shows how to check important fluid and lubricant levels. There is also technical information about your vehicle, and a part devoted to its appearance care.
Page 337 Your dealer knows your vehicle best and wants you to want to use the proper Chevrolet Service Manual. It tells be happy with it. We hope you’ll go to your dealer for you much more about how to service your vehicle than GM parts and all your service needs.
Page 338 Fuel Use regular unleaded gasoline rated at 87 octane or higher. At a minimum, it should meet specifications ASTM D4814 in the United States and CGSB 3.5-M93 You can be injured and your ve :le could be in Canada. Improved gasoline specifications have been damaged if you try to do service work on a developed by the American Automobile Manufacturers vehicle without knowing enough about it.
Page 339 If this occurs, return use these gasolines if they comply with the to your authorized Chevrolet dealer for diagnosis to specifications described earlier. determine the cause of failure. In the event it is...
Page 340 Fuels in Foreign Countries Filling Your Tank When the fuel door is opened on a vehicle with dual If you plan on driving in another country outside the United States or Canada, the proper fuel may be hard to sliding doors, the driver’s side sliding door will only find.
Page 341 While refueling, hang the cap by the tether from the hook on the filler door hinge or let the cap hang by the tether as shown. To remove the cap, turn it slowly to the left Gasoline vapor is highly flammable. It burns (counterclockwise).
Page 342 Fillinq a Portable Fuel Container When you put the cap back on, turn it to the right (clockwise) until you hear a clicking sound. Make sure you fully install the cap. The diagnostic system can determine if the fuel cap has been left off or improperly installed.
Page 343 Checking Things Under the Hood Hood Release CAUTION: An electric fan under the hood can start up and injure you even when the engine is not running, Keep hands, clothing and tools away from any underhood electric fan. CAUTION: Things that burn can get on hot engine parts and To open the hood, first pull the hood release handle start a fire.
Page 344 ..Pull forward on the hood prop to release it from its storage clip. Then put the end of the hood prop into the slot in the underside of the hood. Then go the front of the vehicle and push up on the underhood release.
Page 345 When you lift the hood, you'll see these items: A. Underhood Fuse D. Radiator Pressure H. Transaxle Fluid Dipstick Relay Center E. Power Steering Fluid Reservoir I. Brake Master Cylinder B. Remote Positive Terminal E Engine Oil Fill Location J. Air Cleaner C.
Page 346 It’s a good idea to check your engine oil every time Before closing the hood, be sure all the filler caps are on properly. Then lift the hood to relieve pressure on get fuel. In order to get an accurate reading, the oil must the hood prop.
Page 347 Checking Engine Oil NOTICE: Pull out the dipstick and clean it with a paper towel or cloth, then push it back in all the way. Remove it again, Don’t add too much oil. If your engine has so keeping the tip down, and check the level. much oil that the oil level gets above the cross-hatched area that shows the proper operating range, your engine could be damaged.
Page 348 What Kind of Engine Oil to Use RECOMMENDED SAE YlSCOSlTT GRADE ENGINE OILS Oils recommended for your vehicle can be identified SELECT THE LOWEST FOR BEST FUEL ECONOMY AND COLD STARTING, by loolung for the “Starburst” symbol. This symbol SAE YlSCOSlTv GRADE OIL FOR THE EXPECTED TEMPERATURE RANGE. indicates that the oil has been certified by the American Petroleum Institute (API).
Page 349 Engine Oil Additives As shown in the chart, S A E 5W-30 is best for your vehicle. However, you can use S A E 1OW-30 if it's going Don't add anything to your oil. Your dealer is ready to " to be 0"...
Page 350 If none of them is true, use the long triphighway Air Cleaner maintenance schedule. Change the oil and filter every 7,500 miles (12 500 or 12 months whichever occurs first. Driving a vehicle with a fully warmed engine under highway conditions causes engine oil to break down slower.
Page 351 Checking or Replacing the Air Cleaner NOTICE: Unlatch the two hooks on top of the air cleaner housing. If the air cleaner is off, a backfire can cause a Turn back the air inlet panel and rest it on top of the damaging engine fire.
Page 352 1. Pull the tab up and out on the outer access panel. Then squeeze the tab on the left of the inner access panel. The first air filter will pull straight out. To remove the second, reach in and slide it toward the opening. Pull the second filter out.
Page 353 Automatic Transaxle Fluid Because this operation can be a little difficult, you When to Check and Change choose to have this done at your Chevrolet dealership A good time to check your automatic transaxle fluid Service Department. level is when the engine oil is changed.
Page 354 Wait at least 30 minutes before checking the transaxle Let the engine run at idle for three to five minutes. fluid level if you have been driving: Then, without shutting off the engine, follow these steps: When outside temperatures are above 90°F (32°C). At high speed for quite a while.
Page 355 If the fluid level is low, add only enough of the proper fluid to bring the level into the cross-hatched area on the dipstick. 1. Pull out the dipstick. 2. Using a long-neck funnel, add enough fluid at the dipstick hole to bring it to the proper level. It doesn’t take much fluid, generally less than one pint (0.5 L).
Page 356 Engine Coolant NOTICE: The cooling s stem in your vehicle is filled with DEX-COOL engine coolant. This coolant is designed When adding coolant, it is important that you to remain in your vehicle for 5 years or 150,000 miles use only DEX-COOL@ (silicate-free) coolant. 000 km) whichever occurs first, if you add only (240 If coolant other than DEX-COOL is added to the...
Page 357 What to Use NOTICE: Use a mixture of one-half clean water (preferably distilled) and one-half DEX-COOL@ coolant which If you use an improper coolant mixture, your won’t damage aluminum parts. If you use this mixture, engine could overheat and be badly damaged. you don’t need to add anything else.
Page 358 Checking Coolant comes light If this means you’re low on The engine coolant reservoir is located on the driver’s engine coolant. side of the vehicle, above the air cleaner. Adding Coolant If you need more coolant, add the proper DEX-COOL@ coolant mixture at the coolant recovery tank.
Page 359 Thermostat Engine coolant temperature is controlled by a thermostat in the engine coolant system. The thermostat stops the flow of coolant through the radiator until the coolant You can be burned if you spill coolant on hot reaches a preset temperature. engine parts, Coolant contains ethylene glycol, and it will burn if the engine parts are hot When you replace your thermostat, a GM thermostat...
Page 360 Windshield Washer Fluid When to Check Power Steering Fluid It is not necessary to regularly check power steering What to Use fluid unless you suspect there is a leak in the system or When you need windshield washer fluid, be sure to read you hear an unusual noise.
Page 361 Brakes Brake Fluid When using concentrated washer fluid, follow the manufacturer’s instructions for adding water. Don’t mix water with ready-to-use washer fluid. Water can cause the solution to freeze and damage your washer fluid tank and other parts of the washer system. Also, water doesn’t clean as well as washer fluid.
Page 362 There are only two reasons why the brake fluid level in the reservoir might go down. The first is that the CAUTAN: brake fluid goes down to an acceptable level during normal brake lining wear. When new linings are put in, If you have too much brake fluid, it can spill the fluid level goes back up.
Page 363 What to Add NOTICE: When you do need brake fluid, use only DOT-3 brake such as Delco Supreme 11 (GM Part fluid Using the wrong fluid can badly damage No. 12377967). Use new brake fluid from a sealed container only. brake system parts.
Page 364 Some driving conditions or climates may cause a Brake Wear brake squeal when the brakes are first applied or lightly Your vehicle has front disc brakes and rear drum brakes. applied. This does not mean something is wrong with your brakes. Disc brake pads have built-in wear indicators that make a high-pitched warning sound when the brake Properly torqued wheel nuts are necessary to help...
Page 365 Every new Chevrolet has an ACDelco Freedom@ normal height, or if there is a rapid increase in pedal battery. You never have to add water to one of these. travel. This could be a sign of brake trouble.
Page 366 Also, for your audio system, see “Theft-Deterrent Headlamps Feature” in the Index. Jump Starting NOTICE: For jump starting instructions, see “Jump Starting” in the Index. When replacing the headlamp bulb, do not leave the bulb out for any length of time. This could Bulb Replacement cause nitrogen gas to escape from the lamp.
Page 367 Remove the two wing nuts located on top of the 5 . Pull the bulb assembly straight up from the headlamp assembly. lamp housing. 6. Unhook the electrical connector by lifting up the 4. Unscrew the black retainer ring that holds the bulb assembly in place.
Page 368 8. Carefully put the bulb assembly back into the lamp 7. Replace the new bulb through the black retainer ring and into the electrical connector. Push the bulb housing and tighten the black retainer ring in place. firmly enough so that the blue tabs hook over the tab Be careful not to damage the bulb on the headlamp on the bulb.
Page 369 Front P a r k i n e r n Signal Lamps 1. Open the hood. 9. Align the pins on the bottom of the headlamp assembly with the holes in the lamp support bracket while placing the holes in the assembly over the bolts where the wing nuts attach.
Page 370 5. Replace the bulb by pulling the old one out and To replace the lamp assembly, line up and insert the gently pushing the new one into the lamp socket. tabs on the back of the assembly with the slots in the fender.
Page 371 Front Sidemarker 1. Open the hood. 5. Replace the bulb by pulling the old one out and gently pushing the new one into the lamp socket. 6. Line up the tabs on the sockets with the gaps in the 2. Remove the thumb screw attaching the parking/turn socket holes and screw the bulb socket back into the signal lamp assembly to the headlarnp assembly.
Page 372 8. To align the parking/turn signal lamp assembly with the headlamp assembly, lift up the parking/turn signal lamp assembly until the upper edge is contacting the fender. 9. Fasten the parkinghrn signal lamp assembly to the headlamp assembly with the thumb screw removed in Step 1.
Page 373 C. Turn Signal Bulb Tail Bulb 4. Remove the bulb holder by pressing the four B. Back-up Bulb D. StoplI'ail Bulb retaining tabs and pulling the holder away from the assembly. 6. Snap the bulb holder back into place making sure all 5.
Page 374 Windshield Wiper Blade Replacement For the proper windshield wiper blade length and type, see “Replacement Parts” in the Index. Replacement blades come in different types and are removed in different ways. Here’s how to remove the type with a release clip: 1.
Page 375 Underinflated tires pose the same danger as about your tire warranty and where to obtain service, see overloaded tires. The resulting accident your Chevrolet Warranty booklet for details. could cause serious injury. Check all tires frequently to maintain the recommended pressure.
Page 376 Inflation Tire Pressure NOTICE: (Continued) The Certificatioflire label, which is the rear edge of the driver’s door, shows the correct inflation pressures If your tires have too much air (overinflation), for your tires when they’re cold. “Cold” means your you can get the following: vehicle has been sitting for at least three hours or driven Unusual wear no more than 1 mile (1.6 km).
Page 377 Tire Inspection and Rotation Don’t include the compact spare tire in your tire rotation. Tires should be rotated every 6,000 to 8,000 miles After the tires have been rotated, adjust the front and (10 000 to 13 000 Ism). Any time you notice unusual rear inflation pressures as shown on the wear, rotate your tires as soon as possible and check Certificatioflire label.
Page 378 When It’s Time for New Tires The tire has a bump, bulge or split. The tire has a puncture, cut or other damage that One way to tell when it’s can’t be repaired well because of the size or location time for new tires is to of the damage.
Page 379 Uniform Tire Quality Grading The following information relates to the system developed by the United States National Highway Traffic Safety Administration, which grades tires by Mixing tires could cause you to lose control while treadwear, traction and temperature performance. (This driving.
Page 380 Treadwear Temperature The treadwear grade is a comparative rating based on The temperature grades are A (the highest), and C, the wear rate of the tire when tested under controlled representing the tire’s resistance to the generation of conditions on a specified government test course. heat and its ability to dissipate heat when tested under For example, a tire graded 150 would wear one and a controlled conditions on a specified indoor laboratory...
Page 381 Chevrolet model. alignment may need to be reset. If you notice your vehicle vibrating when driving on a smooth road, your wheels may need to be rebalanced.
Page 382 Tire Chains NOTICE: NOTICE: The wrong wheel can also cause problems with bearing life, brake cooling, speedometer or Use tire chains only where legal and only when odometer calibration, headlamp aim, bumper “S” you must. Use only Class type chains height, vehicle ground clearance and tire or tire that are the proper size for your tires.
Page 383 Don’t use any of these unless this manual says you can. Appearance Care In many uses, these will damage your vehicle: Remember, cleaning products be hazardous. aome Alcohol are toxic. Others can burst into flame if you strike a Laundry Soap match or get them on a hot part of the vehicle.
Page 384 2. If a stain remains, follow the multi-purpose interior Using Multi-Purpose Interior Cleaner cleaner instructions described earlier. on Fabric 3. If an odor lingers after cleaning vomit or urine, 1. Vacuum and brush the area to remove any loose dirt. treat the area with a waterhaking soda solution: 2.
Page 385 Cleaning the Built-in Child Cleaning Vinyl Restraint Pad Use warm water and a clean cloth. Rub with a clean, damp cloth to remove dirt. You The built-in child restraint pad is attached to the seat may have to do it more than once. frame with fastener strips.
Page 386 Clean the outside of the windshield with GM Cleaning Glass Surfaces Windshield Cleaner, Bon Ami@ Powder (non-scratching Glass should be cleaned often. GM Glass Cleaner (GM glass cleaning powder), GM Part No. 105001 1. The Part No. 1050427) or a liquid household glass cleaner windshield is clean if beads do not form when you will remove normal tobacco smoke and dust films on rinse it with water.
Page 387 Cleaning Exterior Lamps/Lenses Cleaning the Outside of Your Vehicle Use lukewarm or cold water, a soft cloth and a liquid The paint finish on your vehicle provides beauty, depth hand, dish or car washing (mild detergent) soap to clean of color, gloss retention and durability. exterior lamps and lenses.
Page 388 Foreign materials such as calcium chloride and other Don’t take your vehicle through an automatic car wash that has silicon carbide tire cleaning brushes. These salts, ice melting agents, road oil and tar, tree sap, bird brushes can also damage the surface of these wheels. droppings, chemicals from industrial chimneys, etc., can damage your vehicle’s finish if they remain on painted Cleaning Tires...
Page 389 Larger areas of finish damage can be corrected in your dealer’s body and paint shop. Although no defect in the paint job causes this, Chevrolet will repair, at no charge to the owner, the Underbody Maintenance surfaces of new vehicles damaged by this fallout...
Page 390 Appearance Care Materials Chart NUMBER PART SIZE DESCRIPTION USAGE 994954 in. x Polishing Cloth Wax Treated Exterior polishing cloth ~~~~ 1050172 (0.473 Tar and Road Oil Remover Removes tar, road oil and asphalt 0 2 . 1050173 (0.473 Chrome Cleaner and Polish Use on chrome, stainless steel, nickel, copper and brass 1050174 (0.473...
Page 391 Vehicle Identification Number (VIN) Service Parts Identification Label You’ll find this label on the inside of the access panel located on the driver’s side of the rear of the vehicle. It’s very helpful if you ever need to order parts. On this label is: your VIN, E N G I N E A k...
Page 392 Electrical System Headlamp Wiring The headlamp wiring is protected by internal circuit Add-on Electrical Equipment breaker in the IfP fuse panel. An electrical overload will cause the lamps to go on and off, or in some cases to remain off. If this happens, have your headlamp wiring NOTICE: checked right away.
Page 393 Fuses and Circuit Breakers Instrument Panel Fuse Block The wiring circuits in your vehicle are protected from The instrument panel short circuits by a combination of fuses, circuit breakers fuse block is to the right and fusible thermal links. of the glove box. Pull the door open to access the Look at the silver-colored band inside the fuse.
Page 394: Fuse Usage Chart
Fuses FUSE USAGE CHART Steering Wheel Radio Control BACKLIGHT TILP CIRCUIT BACKLIGHT Switches (Illumination) BREAKERS PRNDL ELEC RR FOG LP RR DEFOG ELEC PRNDL Instrument Cluster to PWR MIRROR ClGARiDLC FRT PWR S C U CTSY LAMP PRNDL Indicators CRUISE TBIG PWR MIRROR Power Remote Control...
Page 395 Fuses Fuses RR HVAC Rear STOP LAMP Stoplamp Switch to Stoplamps Rear Blower Motor, Heater-NC Control, ABS MOD BATT Electronic Brake Control and Temperature Door ModuleElectronic Brake Actuator (Rear) Traction Control Module (EBCMEBTCM) Steering Wheel Radio SWC ACCY Control Switches CAN VENT Evaporative Emissions (EVAP) HAZARD...
Page 396 Underhood Fuse and Relay Center Fuses RR WPR WSHR Rear Window Wiper Motor, Rear Window Wipermasher and Multifunction Switch (Rear Window Wipermasher Switch) LH HEADLP LOW Not Used LH HEADLP HIGH Not Used ABS/TCS IGN Electronic Brake Control ModuleElectronic Brake Traction Control Module (EBCMEBTCM) ABS SOL...
Page 397 Maxi Fuse 5-IGN MAIN 1 Ignition Switch to Fuses (VP): ABS/TCS IGN, CRUISE, DRL, ELEC PRNDL, IGN 1, PSD, SIR, T/SIG and PCM [IGN MAIN Relay (Underhood Electrical Center Fuses: CLU, ELEK IGN, IGN l-U/H, INJ, TCC)] 6-COOL FAN 1 Coolant Fans 7-BATT MAIN 1 Fuses (UP): ABS MOD BATT, CIGARDLC, CTSY LAMP, FRT...
Page 398 Mini Relays Mini Fuse 9-COOL FAN RH FAN 1, LH FAN 21-IGN1-UH Evaporative Emissions (EVAP) Canister Purge Valve, Heated 10-COOL FAN 2 LH FAN 2 Oxygen Sensors 1 and 2, Mass Air Flow (MAF) Sensor 1 1 -1GN MAIN FUSES: A/C CLU, IGN l-U/H, INS, ELEK IGN, TCC 22-SPARE Not Used...
Page 399 Replacement Bulbs Mini Fuse Exterior Lamps Number Bulb Generator 30-ALT SENSE ......Headlamps 9004-HBI -TCC Automatic Transaxle (Torque Front ParkingRurn Converter Clutch Solenoids) .
Page 401 Vehicle Dimensions Regular Normal Maintenance Wheel Base Replacement Parts ......Length 186.9 inches (474.6 cm) Air Cleaner Filter AC Type A- 1208C...
Page 402 NOTES 6-67...
Page 403 NOTES 6-68...
Page 404 Section 7 Maintenance Schedule This section covers the maintenance required for your vehicle. Your vehicle needs these services to retain its safety, dependability and emission control performance. Introduction Selecting the Right Schedule Your Vehicle and the Environment 7-29 Part B: Owner Checks and Services How This Section is Organized 7-33 Part C: Periodic Maintenance Inspections...
Page 405 Have you purchased the GM Protection Plan? The Plan supplements your new vehicle warranties. See your Warranty and Owner Assistance booklet, or your Chevrolet dealer for details.
Page 406 “Part B: Owner Checks and Services” tells How This Section is Organized you what should be checked and when. It also explains The remainder of this section is divided into five parts: what you can easily do to help keep your vehicle in “Part A: Scheduled Maintenance Services’’...
Page 407 to use are listed Part A: Scheduled Maintenance The proper fluids and lubricants P a r t Make sure whoever services your vehicle uses Services these. All parts should be replaced and a l l necessary repairs done before you or anyone else drives the vehicle. Using Your Maintenance Schedule These schedules are for vehicles that: We at General Motors want to help you keep your...
Page 408 Maintenance Schedule Short Trip/City Definition Short TripKity Intervals Every 3,000 Miles 000 km): Engine Oil and Filter Follow the Short TripKity Maintenance Schedule if any Change (or 3 months, whichever occurs first). one of these conditions is true for your vehicle: Most trips are less than 5 to 10 miles (8 to 16 Every 6,000 Miles (10 000 krn).
Page 409 Maintenance Schedule Short TripKity Intervals Long Tripmighway Intervals Every 7,500 Miles (12 500 km): Engine Oil and Filter Every 150,000 Miles (240 km): Cooling System Change (or every 12 months, whichever occurs first). Service (or every 60 months, whichever occurs first). Chassis Lubrication (or every 12 months, whichever These intervals only summarize maintenance services.
Page 410 Short Trip/City Maintenance Schedule The services shown in this schedule up to 100,000 miles Lubricate the suspension, steering linkage, transaxle (166 000 should be performed after 100,000 miles shift linkage, parking brake cable guides and the (166 000 at the same intervals. The services shown underbody contact points and linkage.
Page 411 Short Maintenance Schedule TripKity 3,000 Miles (5 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. 6,000 Miles (I 0 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Sewice.
Page 412 Short Trip/City Maintenance Schedule Replace passenger compartment air filter. Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information. (See footnote 15,000 Miles (25 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). SERVICED B Y MILEAGE ACTUAL...
Page 413 Short TriplCity Maintenance Schedule 24,000 Miles (40 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 6 months, whichever occurs first). (See footnote Replace passenger compartment filter.
Page 414 Short Trip/City Maintenance Schedule 33,000 Miles (55 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. 36,000 Miles (60 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). MILEAGE An Emission Control Service.
Page 415 Short Trip/City Maintenance Schedule 42,000 Miles 000 km) (Continued) Lubricate chassis components (or every 6 months, whichever occurs first). (See footnote Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information. (See footnote 45,000 Miles (75 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first).
Page 416 Short TripKity Maintenance Schedule 50,000 Miles (83 000 km) DATE Change automatic transaxle fluid and filter if the vehicle is mainly driven ACTUAL SERVICED MILEAGE under one or more of these conditions: - In heavy city traffic where the outside temperature regularly reaches 90°F (32°C) or higher.
Page 417 Short TripKity Maintenance Schedule 57,000 Miles (95 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). MILEAGE An Emission Control Service. 60,000 Miles (100 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). MILEAGE An Emission Control Service.
Page 418 Short Trip/City Maintenance Schedule 63,000 Miles (105 000 km) DATE Change engine oil and filter (or every months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. 66,000 Miles (110 000 km) L A T E Change engine oil and filter (or every 3 months, whichever occurs first). MILEAGE An Emission Control Service.
Page 419 Short TripKity Maintenance Schedule Miles (120 000 km) (Continued) 72,000 Lubricate chassis components (or every 6 months, whichever occurs first), (See footnote Replace passenger compartment air filter. Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information. (See footnote 75,000 Miles (125 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first).
Page 420 Short TripKity Maintenance Schedule 81,000 Miles (135 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. 84,000 Miles (140 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service.
Page 421 Short Trip/City Maintenance Schedule 90,000 Miles (150 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Sewice. Lubricate chassis components (or every 6 months, whichever occurs first). (See footnote Replace air cleaner filter. An Emission Control Service.
Page 422 Short Trip/City Maintenance Schedule 99,000 Miles (165 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. 100,000 Miles (166 000 km) DATE Inspect spark plug wires. MILEAGE An Emission Control Service.
Page 423 Short Trip/City Maintenance Schedule 150,000 Miles (240 000 km) Drain, flush and refill cooling system (or every 60 months since last service, ACTUAL SERVICED MILEAGE whichever occurs first). See “Engine Coolant” in the Index for what to use. Inspect hoses. Clean radiator, condenser, pressure cap and neck.
Page 424 Long Tripmighway Maintenance Schedule to 100,000 Lubricate the suspension, steering linkage, transaxle The services shown in this schedule up miles (166 000 should be performed after 100,000 miles shift linkage, parking brake cable guides and the (166 000 at the same intervals. The services shown underbody contact points and linkage.
Page 425 7,500 Miles (12 500 km) DATE Change engine oil and filter (or every 12 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 12 months, whichever occurs first). (See footnote Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information.
Page 426 Long Tripmighway Maintenance Schedule Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information. (See footnote 30,000 Miles (50 000 km) DATE Change engine oil and filter (or every 12 months, whichever occurs first). ACTUAL SERVICEDBY: MILEAGE...
Page 427 Long TripMighway Maintenance Schedule 45,000 Miles (75 000 km) DATE Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Control Service. Lubricate chassis components (or every 12 months, whichever occurs first). (See footnote Replace passenger compartment air filter. Rotate tires.
Page 428 Long Tripmighway Maintenance Schedule 52,500 Miles 500 km) DATE Change engine oil and filter (or every months, whichever occurs first). An Emission Control Service. Lubricate chassis components (or every 12 months, whichever occurs first). (See footnote Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information.
Page 429 Long Trip/Highway Maintenance Schedule 67,500 Miles (112 500 km) DATE Change engine oil and filter (or every 12 months, whichever occurs first). MILEAGE An Emission Control Service. Lubricate chassis components (or every 12 months, whichever occurs first). (See footnote Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information.
Page 430 Long Trip/Highway Maintenance Schedule Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information. (See footnote 90,000 Miles (150 000 km) DATE Change engine oil and filter (or every 12 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE...
Page 431 Long Tripmfghway Maintenance Schedule 100,000 Miles (166 000 km) DATE Inspect spark plug wires. MILEAGE An Emission Control Service. Replace spark plugs. An Emission Control Service. Change automatic transaxle fluid and filter if the vehicle is mainly driven under one or more of these conditions: heavy city traffic where the outside temperature regularly reaches 90°F (32°C) or higher.
Page 432 Windshield Washer Fluid Level Check Part B: Owner Checks and Services Check the windshield washer fluid level in the Listed below are owner checks and services which windshield washer tank and add the proper fluid if should be performed at the intervals specified to help necessary.
Page 433 At Least Twice Year Automatic Transaxle Check needed. Check the transaxle fluid level; add if Restraint System Check “Automatic Transaxle” in the Index. A fluid loss may Make sure the safety belt reminder light and all your indicate a problem. Check the system and repair if needed. belts, buckles, latch plates, retractors and anchorages are Least Once a Year working properly.
Page 434 Brake-Transaxle Shift Interlock (BTT”’1 Check Starter Switch Check CAUTION: CAUTION: When you are doing this check, the vehicle could When you are doing this check, the vehicle could move suddenly. If it does, you or others could be move suddenly. If it does, you or others could be injured.
Page 435 Park on a fairly steep hill, with the vehicle facing Ignition Transaxle Lock Check set the downhill. Keeping your foot on the regular brake, While parked, and with the parking brake set, try to turn parking brake. the ignition key to LOCK in each shift lever position. To check the parking brake’s holding ability: With The key should turn to LOCK only when the shift NEUTRAL (N),...
Page 436 build-up in the floor pan or could let exhaust fumes into Part C: Periodic Maintenance the vehicle. See “Engine Exhaust” i n the Index. Inspections Engine Cooling System Inspection Listed below are inspections and services which should be performed at least twice a year (for instance, each spring Inspect the hoses and have them replaced if they are and fall).
Page 437 Part D: Recommended Fluids USAGE FLUIDLUBRICANT and Lubricants Hydraulic Brake Delco Supreme l l @ Brake Fluid NOTE: Fluids and lubricants identified below by name, System (GM Part No. 12377967 or equivalent DOT-3 Brake Fluid). part number or specification may be obtained from your dealer.
Page 438 USAGE FLUIDLUBRICANT USAGE FLUIDLUBRICANT Chassis Chassis Lubricant (GM Part Hood and Door Multi-Pu Lubricant, No. 12377985 or equivalent) or Lubrication Hinges Superlube (GM Part lubricant meeting requirements of 12346241 or equivalent). NLGI # Category LB Rear Folding Multi-Pu ose Lubricant, or GC-LB.
Page 439 Part E: Maintenance Record After the scheduled services are performed, record the Services” or “Periodic Maintenance” can be added on the following record pages. Also, you should retain all date, odometer reading and who performed the service in the boxes provided after the maintenance interval. maintenance receipts.
Page 440 Maintenance Record 7-37...
Page 441 Maintenance Record 7-38...
Page 442 Maintenance Record...
Page 443 Maintenance Record ODOMETER SERVICED BY DATE READING MAINTENANCE PERFORMED 7-40...
Page 444 Section 8 Customer Assistance Information Here you will find out how to contact Chevrolet if you need assistance. This section also tells you how to obtain service publications and how to report any safety defects. Customer Satisfaction Procedure 8- 10...
Page 445 Customer Satisfaction Procedure Chevrolet dealers have the facilities, trained technicians and up-to-date information to promptly address any concerns you may have. However, if a concern has not been resolved to your complete satisfaction, take the following steps: STEP ONE -- Discuss your concern with a member of dealership management.
Page 446 In the Dominican Republic: 1-800-75 1-4135 cannot be resolved by the dealership without further (English) or 1-800-751-4136 (Spanish) help, contact the Chevrolet Customer Assistance In the Bahamas: 1-800-389-0009 Center by calling 1-800-222- 1020. In Canada, contact GM...
Page 447 To assist customers who are deaf, hard of hearing, or Nature of concern speech-impaired and who use Text Telephones (TTYs), Chevrolet has TTY equipment available at its Customer We encourage you to call us so we can give your inquiry Assistance Center. Any TTY user can communicate with prompt attention.
Page 448 To enhance Chevrolet’s strong commitment to customer satisfaction, Chevrolet is excited to announce the establishment of the Chevrolet Roadside Assistance Center. As the owner of a 1998 Chevrolet, membership in Roadside Assistance is free.
Page 449 Plus: the Bumper to Bumper New Vehicle Limited Warranty FREE Non-Warranty Towing (to the closest dealer to eligible purchasers of 1998 Chevrolet passenger cars from a legal roadway) and light duty trucks. (Please see your selling dealer for details.)
Page 450 For complete program details, see your Chevrolet dealer Please refer to the Roadside Assistance brochure to obtain a Roadside Assistance Center brochure. inside your owner information portfolio for full program details. The Roadside Assistance Center uses companies that will provide you with quality and priority service. When...
Page 451 Courtesy Transportation Bumper to Bumper New Vehicle Limited Warranty. Chevrolet offers Courtesy Transportation for customers Chevrolet reserves the right to make any changes or needing warranty service. Courtesy Transportation will discontinue Courtesy Transportation at any time be offered in conjunction with the coverage provided by without notification.
Page 452 BBB AUTO LINE Both Chevrolet and your Chevrolet dealer are committed Council of Better Business Bureaus, Inc. to making sure you are completely satisfied with your new 4200 Wilson Boulevard vehicle.
Page 453 For further information, contact the General Motors. courts. BBB at 1-800-955-5 100 or the Chevrolet Customer To contact NHTSA, you may either call the Auto Safety Assistance Center at 1-800-222- 1020. Hotline toll-free at 1-800-424-9393 (or 366-0123 in the Washington, D.C.
Page 454 In addition to notifying NHTSA (or Transport Canada) in a situation like this, we certainly hope you’ll notify us. Please call us at 1-800-222-1020 or write: Chevrolet Motor Division Chevrolet Customer Assistance Center P.O. Box 7047 Troy, MI 48007-7047 8-11...
Page 455 1998 CHEVROLET SERVICE PUBLICATIONS ORDERING INFORMATION The following publications covering the operation and servicing of your vehicle can be purchased by filling the Service Publication Order Form in this book and mailing it in with your check, money order, or credit card information to Helm, Incorporated (address below.)
Page 456 Orders will be mailed within 1 O-days of receipt. Please allow ade uate time for postal ORDER TOLL FREE service. If further Information needed, write to the address s own below or call (NOTE: For Credit Card Holders On&) 1-800-782-4356. Material cannot be returned for credit without packing slip with return 1 -800-782-4356 information within 30 days of delivery.
Page 457 NOTES 8-14...
Page 458 Section 9 Index ............Appearance Care 6-48 Accessory Inflator System 2-78 ..........Appearance Care Materials 6-55 Accessory Power Outlet 2-80 ..........Ashtray 2-77 Adding Equipment to the Outside Of Your Vehicle ............
Page 464 .......... Mode Buttons. Climate Control System LossofControl 4-15 ....... . . Mode Knob.
Page 467 ........Seats (Continued) Skidding 4-15 .

Chevrolet VENTURE 1998 Manual

Quick Links

Related Manuals for Chevrolet VENTURE 1998

Summary of Contents for Chevrolet VENTURE 1998

Page 394: Fuse Usage Chart

Table of Contents