Chevrolet VENTURE 1997 Manual

page of 451

/ 451
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Download this manual

. . .

Table of Contents

Summary of Contents for Chevrolet VENTURE 1997

Page 1 . . .
Page 2 Service and Appearance Care manual tells you how keep your Chevrolet running properly ;and looking good. Here Maintenance Schedule use. f what .fluids and lubricants to This section tells you when to perfom vehicle mdtenance Customer Assistance .Information...
Page 3 For vehicles €irst sold in Canada, substitute the name Far Canadian Owners Who Prefer a “General Motors of Canada Limited” for Chevrolet Motor Division whenever it appears in this manual. French Language Manual:...
Page 4 “Classic Six” rolled off the line in 19 12, more than 1 10 million owners. have selected a the world. vehicle designed, engineered and Chevrolet cars and trucks have The Chevrolet blend of crafted by teamwork, a vehicle worn the Chevrolet marque.
Page 5 The legacy America's favorite sportscar began in 1953, when 319 hand-assembled In 1932 Chevrolet white Corvettes introduced the launched Synchro-Mesh first use transmission and fiberglass body in offered a host of a production car: accessories including such niceties as a clock!
Page 6 The 1957 Chevy started a romance with the American and was powered by an available fuel-injected V8. public...
Page 7 How to Use this Manual Many people read their owner’s manual from beginning to end when they first receive their new vehicle. If you do this, it will help you learn about the features and These mean there is something that could hurt controls for your vehicle.
Page 8 Vehicle Damage Warnings In the notice area, we tell you about snrnething that can damage your vehicle. Many times, this damage Also, in this book you will find these notices: would not be covered by your warranty, and it could be costly.
Page 9 Vehicle Symbols These are some of the symbols you may find on your vehicle. For example, These symbols These symbols These symbols These symbols Here are some are on some of other symbols these symbols are important have to do with are used on are used on an for you and...
Page 10 Section 1 Seats and Restraint Systems Here you’ll find information about the seats in your Chevrolet and how to use your safety belts properly. You can also learn about some things you should nut do with air bags and safety belts.
Page 11 Seats and Seat Controls This section tells you about the seats how to adjust and fold & them, take them out, put them back unfold them. Driver’s 4-way Manual Seat To raise the seat, pull up on the lever on the front right side of the seat.
Page 12 Folding Driver’s Seatback Driver’s 6-Way Power Seat (Option) The seatback the driver’s seat folds forward to put items behind the seat. Lift the lever and fold the seatback forward. The seatback will lock into place when you push it back to the upright position.
Page 13 Manual Front Passenger Seats Reclining Front Seatbacks All front seats recline. To use, pull up the lever on the front of the seat to To adjust the seatback, unlock it. Slide the seat rotate this knob. It is easier to where you want it. to recline the seat if you lean forward, talung your weight off the seatback.
Page 14 Sitting in a reclined position when your vehicle in motion can be dangerous. Even if you buckle up, your safety belts can’t do their job when you’re reclined like this. The shoulder belt can’t do its job because it won’t be against your body. Instead, it will be in front of you.
Page 15 the levers and straps, in the correct order, you can easily Manual Lumbar Control remove the seats from your vehicle. Turn the knob on the When you replace the seats in the vehicle, be sure to outboard side of the follow the label on the back of the seat for proper location.
Page 16 Second Row Safety Belt Stowage Dump and Stow Feature If your vehicle has seats in the third row, there is a The rear seats in your vehicle can be folded forward. sleeve on the second row outside safety belt to store the Use this feature for exiting and entering third row seats.
Page 17 Removing the Second Row Solid Bench Seat Solid Bench Seat With the seatback in the upright position, unhook the If you have a solid bench seat, the seatback can be This side attachment for the safety belt. mini-buckle is folded down. The seat can also be folded forward or located on the right side of the seat.
Page 18 2. From behind the bench seat, pull the nylon strap at 4. Unhook the front latches by rolling up the gray handle under the seat until the handle locks. the base of the seat to release the rear latches from floor pins.
Page 19 Replacing the Second Row Solid Bench Seat Don’t put the bench seat in so it faces backward because it won’t latch that way. The solid benches have seat position labels, located on the back of the seat, showing where the seat must Follow that diagram.
Page 20 A seat that isn’t locked into place properly can move around in a collision or sudden stop. People in the vehicle could be injured. Be sure to lock the seat into place properly when installing it. 6. Pull the nylon strap on the back of the seat and raise the seatback until it locks upright.
Page 21 Third Row Solid Bench Seats Folding the Seatback To fold down the seatback, pull the nylon strap on the I f the seatback isn’t locked, it could move back of the seat. forward in a sudden stop or crash. That could cause injury to the person sitting there.
Page 22 Adjusting the Third Row Solid Bench Seat There are two levers to adjust the seat forward or rearward. They are below the center position of the bench, one in front and one in back of the seat. Lift up either lever and slide the seat forward to allow for extra storage behind the seat, or slide the seat back to allow extra room for third row passengers.
Page 23 5. Unhook the front latches by rolling up the gray Removing the Third Row Solid Bench Seat handle under the seat until the handle locks. 1. Pull the nylon strap on the back of the seat to fold the seatback forward. 2.
Page 24 Replacing the Third Row Solid Bench Seat 6. Remove the seat by rocking it slightly Don’t put the bench seat in so it faces backward because towards the rear of the it won’t latch that way. If you want more storage room vehicle and then pulling behind the seat, adjust the seat by sliding it forward.
Page 25 2. With the seat still folded forward, roll down the gray handle underneath the seat to lock the front latches......3. If the front legs are not attached correctly, the rear legs will not attach the rear set of floor pins.
Page 26 CAUTION: A seat that isn’t locked into place properly can move around in collision or sudden stop. People in the vehicle could be injured. Be sure to lock the seat into place properly when installing it. 7. Pull the nylon strap on the back of the seat and raise the seatback until it locks upright.
Page 27 Split Bench Seats you have the split bench seat (50/50 or 40/60), the seatbacks can be folded down individually and the sections can be removed individually. The sections can also be adjusted forward or rearward individually. The second row (40/60) split bench may be equipped with built-in child restraint(s).
Page 28 Adjusting the Split Bench Seats Lift up either lever and slide the seat forward to allow for extra storage behind the seat, or slide the seat back to allow extra room for passengers. Release the lever. Push and pull on the seat to be sure it is locked into place.
Page 29 From behind the bench seat, pull the nylon strap at Removing the Split Bench Seat the base of the seat to release the rear latches from Make sure the seatback is in the upright position and floor pins. that the safety belts are the correct section of the seat.
Page 30 5. To unlatch the front latches, squeeze the angled latch Remove the seat by release bar towards the straight crossbar. rocking it slightly towards the rear of the vehicle and then pulling it out. Repeat Steps 1 through 5 for the other section of the split bench seat.
Page 31 Replacing the Split Bench Sections 1. Squeeze the angled gray towards the solid gray crossbar while placing the front hooks of the bench Don’t put the sections of the bench seat in so they face seat onto the front two floor pins. backward because they won’t latch that way.
Page 32 2. To do this, the bench seat will need to be angled so that the front hooks clear the floor pins. 4. If the front latches are not attaching correctly, check that the seat is in the full rear position. 5.
Page 33 9. Attach the mini-buckle so that the safety belt is ready for use when a passenger uses the seat. CAUTION: The buckle reattaches by pushing the latch into the buckle until the red center pops out again. A seat that isn’t locked move around in a collision or sudden stop.
Page 34 Folding or Reclining the Seatbacks To fold down the seatback, pull the nylon strap on the back of the seat or lift up on the lever on the front of the seatback. Use the lever on the front of the seatback to raise or lower the seatback to the desired position.
Page 35 the Bucket Lift up either lever and slide Seats Adjusting the seat forward to allow for extra storage behind the seat, or slide the seat back to allow extra room for passengers. Release the lever. Push and pull on the seat to be sure is locked into place.
Page 36 Removing the Bucket Seats Make sure the seatback is in the upright position. The head restraints should be fully down. Lift the seatback recliner lever or pull the nylon strap on the back of the seat to fold the seatback forward. Slide the seat a l l the way back by lifting either one of...
Page 37 unlatch the front latches, with the seat folded 6. Remove the seat by forward, squeeze the angled latch release bar rocking it slightly towards the straight crossbar. towards the rear of the vehicle and then pulling it out. This should be done in one motion.
Page 38 Replacing the Bucket Seats RIGHT ONLY seats that have the built-in child restraint option fit only in the right location of the second row, Don’t put the seats in so they face backward because E and F sets of floor cups. they won’t latch that way.
Page 39 3. If the front legs are not attached correctly, the rear 4. If the front latches are not attaching correctly, check legs will not attach to the rear set of floor pins. that the seat is in the full rear position. 5.
Page 40 Safety Belts: They’re for Everyone CAUTION: This part of the manual tells you how to use safety belts properly. It also tells you some things you should not with safety belts. A seat that isn’t locked into place properly can move around in a collision or sudden stop.
Page 41 most states and Canadian provinces, the law says to wear safety belts. Here’s why: They work. CAUTICW If you do have a You never know if you’ll be in a crash. crash, you don’t know if it will be a bad one. It is extremely dangerous to ride in cargo area,...
Page 42 Why Safety Belts Work When you ride in or on anything, you go as fast as it goes. Put someone on it. Take the simplest vehicle. Suppose it’s just a seat on wheels.
Page 43 Get it up to speed. Then stop the vehicle. The rider The person keeps going until stopped by something. doesn’t stop. In a real vehicle, it could be the windshield 1-34...
Page 44 or the instrument panel ... or the safety belts ! With safety belts, you slow aown as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That’s why safety belts make such good sense.
Page 45 If I’m a good driver, and I never drive far from Here Are Questions Many People Ask home, why should I wear safety belts? About Safety Belts and the Answers You may be an excellent driver, but if you’re in an Won’t I be trapped in the vehicle after an accident even one that isn’t your fault...
Page 46 And there different rules for smaller children and babies. If a child will be riding in your Chevrolet, see the part of this manual called “Children.” Follow those rules for everyone’s protection. First, you’ll want to know which restraint systems your vehicle has.
Page 47 4. Push the latch plate into the buckle until it clicks. Pull up on the latch plate to make sure it is secure. If the belt isn’t long enough, see “Safety Belt Extender” at the end of this section. Make sure the release button on the buckle is positioned you would be able to unbuckle the safety belt quickly if you ever had to.
Page 48 Shoulder Belt Height Adjuster To move it down, push down on the button and move the height adjuster to the desired position. You can move Before you begin to drive, move the shoulder belt the adjuster up just by pushing up on the shoulder belt adjuster to the height that is right for you.
Page 49 &.’ What’s wrong with this? You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit against your body. The shoulder belt is too loose. It won’t give nearly as much protection this way.
Page 50 1 2 : What’s wrong with this? A CAUTION: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not the pelvic bones.
Page 51 &= What% wrong with this? You can be seriously injured if your belt goes over an armrest like this. The belt would be much too high. In a crash, you can slide under the belt. The belt force would then be applied at the abdomen, not at the pelvic bones, and that could cause serious or fatal injuries.
Page 52 What's wrong with this? CAUTION: you wear You can be seriously injured if your arm. In a shoulder belt under crash, your body would move too forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the ribs, which aren't as strong as shoulder bones.
Page 53 What's wrong with this? You can be ser usly injured by a twisted belt. In a crash, you wouldn't have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer to fix it.
Page 54 Safety Belt Use During Pregnancy Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they don’t wear safety belts. To unlatch the belt, just push the button on the buckle. The belt should go back out of the way.
Page 55 They aren’t designed to inflate at all This part explains the air bag system. in rollover, rear, side or low-speed frontal Your Chevrolet has two air bags one air bag for the crashes. Everyone in your vehicle should wear a driver and another bag for the right front passenger.
Page 56 There is an air bag readiness light on the instrument panel, which shows deployed air bag. Air bags inflate with great force, faster than the blink of an eye. If you’re too close to an inflating air bag, it could seriously injure you. Safety belts help keep you in position before and during a crash.
Page 57 How the Air Bag System Works The right front passenger’s air bag is in the instrument panel on the passenger’s side. Where are the air bags? bag is in the middle of the steering wheel. The driver’s 1-48...
Page 58 it can be somewhat above or below this range. If your vehicle strikes something that will move or deform, such as a parked car, the threshold level will be higher. The air bag is not designed to inflate in rollovers, side If someth between an oc( -)ant and an air impacts or rear impacts, because inflation would not...
Page 59 How does an air bag restrain? In moderate to severe frontal or near-frontal collisions, even belted occupants can contact the steering wheel or the instrument panel. Air bags supplement the protection When an air bag inflates, there is dust in the air. provided by safety belts.
Page 60 Chevrolet the air bag system. The module records information Air bags affect how your Chevrolet should be serviced. about the readiness of the system, when the sensors There are parts of the air bag system in several places are activated and driver’s safety belt usage at...
Page 61 Rear Seat Passengers It’s very important for rear seat passengers to buckle up! Accident statistics show that unbelted people in the rear seat are hurt more often in crashes than those who are wearing safety belts. Rear passengers who aren’t safety belted can be thrown out of the vehicle in a crash.
Page 62 Lap-Shoulder Belt Pull up on the latch plate to make sure it is secure. When the shoulder belt is pulled out all the way, it The positions next to the windows have lap-shoulder will lock. If it does, let it go back all the way and belts.
Page 63 force to the strong pelvic bones. And you'd be less likely to slide under the lap belt. If you slid under it, the This belt would apply force at your abdomen. could cause serious or even fatal injuries. The shoulder belt should go over the shoulder and across the chest.
Page 64 Rear Safety Belt Comfort Guides for Children and Small Adults Your vehicle may have rear shoulder belt comfort guides. This feature will provide added safety belt comfort for children who have outgrown child restraints and for small adults. When installed on a shoulder belt, the comfort guide pulls the belt away from the neck and head.
Page 65 3. Be sure that the belt is not twisted and it lies flat. The 2. Place the guide over the belt and insert the two edges guide must be on top of the belt. of the belt into the slots of the guide. 1-56...
Page 66 Center Passenger Position (Bench Seat) 4. Buckle, position and release the safety belt as Lap Belt described in “Rear Seat Outside Passenger Positions” earlier in this section. Make sure that the shoulder If your vehicle has a third row rear bench seat, someone belt crosses the shoulder.
Page 67 To make the belt shorter, pull its free end as shown until When you sit the center position of the bench seat, the belt is snug. you have a lap safety belt, which has no retractor. To make the belt longer, tilt the latch plate and pull it along Buckle, position and release it the same way as the lap the belt.
Page 68 Center Passenger Position (Bucket Seat) When you sit in the center position bucket seat, you have a lap safety belt which has a retractor. Lap Belt 1. Pick up the latch plate and, in a single motion, pull If your vehicle has bucket seats, someone can sit in the the belt across you.
Page 69 INJURY, SECURELY LATCH SEAT IN LOCATION SHOWN LEFT SEE OWNER’S MANUAL FOR ONLY MORE INFORMATION. CENTER OR LEFT The center position bucket seat is type seat. Because it is the only bucket seat with a belt, and has a buckle on only one side, there are certain places a CENTER OR LEFT type bucket seat should, and should not, be used.
Page 70 Children lTTInV: (Continued) Everyone in a vehicle needs protection! That includes infants and all children smaller than adult size. In fact, A very young child’s hip bones are so small that a the law in every state in the United States and in every stay low regular belt might not on the hips, as it...
Page 71 heavy you can't hold it. For example, crash at only 25 mph (40 km/h), a 12-1b. (5.5 kg) baby will suddenly become a 240-1b. (110 kg) force on your arms. The baby would be almost impossible to hold. Secure the baby in an infant restraint. Never hold a baby your arms while riding in a vehicle.
Page 72 Built-in Child Restraint (Option) ’ 1 If your vehicle has this option in a 60/40 bench seat, there’s a built-in child restraint at each outboard position of the 60/40 bench seat. This bench seat will only fit in If your vehicle has this option in a bucket seat, each the second row of your vehicle.
Page 73 Each child restraint designed for use only by children and 40 pounds (10 and 18 who weigh between 33.5 and 40 inches (850 whose height between k m ) 1 016 and who are capable of sitting upright alone. BEFORE YOU USE THIS CHILD RESTRAINT, The child should also be at least one year old.
Page 74 Securing a Child in the Built-In Child Restraint between the lower edge of the head restraint and the top of the seatback. 1. Raise the head restraint until the lower edge of the head restraint is even with the top of the seatback. 1-65...
Page 75 3. Lower the child restraint cushion. You’ll be using the child restraint’s harness (A) to secure your child. Don’t use the vehicle’s safety belts.
Page 76 Using the vehicle’s regular safety belts on a child seated on the child restraint cushion can cause serious injury the child in sudden stop or crash. If a child is the proper size for the built-in child restraint, secure the child using the child restraint’s harness.
Page 77 10. h 1 1 up on both latch plates to make sure they may prevent you from securing the latch plates. If are secure. you can’t secure a latch plate, see your Chevrolet dealer for service before using the child restraint. 1-68...
Page 78 An unfastened shoulder harness clip won’t help keep the harness in place on the child’s shoulders. If the harness isn’t on the child’s shoulders, it won’t be able to restrain the child’s upper body in a sudden stop or crash. The child could be seriously injured.
Page 79 12. Pull the shoulder harness adjustment strap (C) 13. Adjust the position of the harness on the child’s firmly until the harness is snugly adjusted around shoulder by moving the clip up or down along the the child. You should not be able to put more than harness.
Page 80 Removing the Child from the Built-In Child Restraint 2. Unlatch the harness by pushing the button on the buckle. 3. Move one side of the harness off the child's shoulder. 1. Unfasten the shoulder harness clip. 4. Move the other side of the harness off the child's shoulder.
Page 81 Storing the Built-In Child Restraint Always properly store the built-in child restraint before using the vehicle’s lap-shoulder belt. 2. Fold the child restraint cushion and leg rest up into the seatback. 3. Press the child restraint cushion firmly into the seatback. 1.
Page 82 4. Then press the leg rest finnly into the seatback, and Rotate the head restraint forward and push it all the secure by pressing the upper corners against the way down. fastener strips on the seatback. Just like the other restraint systems in your vehicle, your built-in child restraint needs to be periodically checked and may need to have parts replaced after a crash.
Page 83 Child Restraints Be sure the child restraint is designed to be used in a vehicle. If it is, it will have a label saying that it meets Federal Motor Vehicle Safety Standards. A child in a rearfacing child restraint can be seriously.injured the right front passenger’s Then follow the instructions for the restraint.
Page 84 Where to Put the Restraint (Cargo Vans) Top Strap The child restraint must be secured properly in the passenger seat. Never put rear-facing child restraint in this vehicle. Here’s why: A child in a rear-facing child restraint can be seriously injured if the passenger’s air bag inflates.
Page 85 60/40 bench seat, you can ask your Chevrolet dealer to put it in for you. If you want to install an anchor bracket yourself, your dealer can tell you how to do it.
Page 86 4. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to. 1-77...
Page 87 5. Pull the rest of the shoulder belt all the way out of 6. To tighten the belt, feed the shoulder belt back into the retractor while you push down on the child restraint. the retractor to set the lock. 7.
Page 88 Securing a Child Restraint in the Center Seat Position (Third Row Bench Seat) Make the belt as long as possible by tilting the latch You’ll be using the lap belt. plate and pulling it along the belt. See the earlier part about the top strap if the child Put the restraint on the seat.
Page 89 7. Push and pull the child restraint in different directions to be sure it is secure. If it isn’t, secure the restraint in a different place in the vehicle and contact the child restraint maker for their advice about how to attach the child restraint properly. To remove the child restraint, just unbuckle the vehicle’s safety belt.
Page 90 4. While holding it out, run the belt through or around You’ll be using the lap belt. See the earlier part about one. the top strap if the child restraint has the child restraint. The child restraint instructions will show you how. 1.
Page 91 Securing a Child Restraint in the Right Front Seat Position 6. To tighten the belt, feed it back into the retractor Your vehicle has a front passenger air bag. Never put a while you push down on the child restraint. rear-facing child restraint in this seat.
Page 92 You’ll be using the lap-shoulder belt. See the earlier part about the top strap if the child restraint has one. Because your vehicle has a front passenger air bag, always move the seat as far back as it will go before A child in a rear-facing child restraint can be (See securing a forward-facing child restraint.
Page 93 5. Buckle the belt. Make sure the release button is 6. Pull the rest of the shoulder belt all the way out of positioned so you would be able to unbuckle the the retractor to set the lock. safety belt quickly if you ever had to. 1-84...
Page 94 Larger Children 7. To tighten the belt, feed the shoulder belt back into the retractor while you push down on the child restraint. Children who have outgrown child restraints should 8. Push and pull the child restraint in different wear the vehicle’s safety belts. directions to be sure it is secure.
Page 95 you have the choice, child should sit next to window so the child can wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide. Accident statistics show that children safer if they Never do this. are restrained in the rear seat. But they need to use the Here two children are wearing the same belt.
Page 96 Never do this. Here a child is sitting in seat that has a lap-shoulder belt, but the shoulder part is behind the child. If the child wears the belt in this way, in a crash the child might slide under the belt. The belt’s force would then be applied right on the child’s abdomen.
Page 97 Safety Belt Extender your vehicle has the built-in child restraint, torn or frayed harness straps can rip apart under impact forces safety If the vehicle’s belt will fasten around you, you just like torn or frayed safety belts can. They may not should use it.
Page 98 Here you can learn about the standard and optional features your Chevrolet, and information on starting, shifting and braking. Also explained are the instrument panel and the warning systems that tell you if everything is working properly and what to do if you have a problem.
Page 99 Keys CAUTION: Leaving young children i n a vehicle with the ignition key is dangerous for many reasons. A child or others could be badly injured or even killed. They could operate power windows or other controls or even make the vehicle move. Don’t leave the keys in a vehicle with young children.
Page 100 This may not be so obvious: You increase the you need a new key, contact your Chevrolet dealer, who can obtain the correct key code. chance of being thrown out of the vehicle in a crash if the doors aren’t locked.
Page 101 Front Doors To lock either front door from the inside, push the locking lever forward. To unlock either front door from the outside with the To unlock either front door from the inside, pull back on key, insert the key and turn it toward the front of the the locking lever.
Page 102 Deterrent system, the power door lock switch may cause Power Door Locks the system to arm. See “Content Theft Deterrent” in the Index for more details. To unlock any door or the liftgate from the outside with your key, turn the key to the unlock position and release. This will only unlock that door or the liftgate.
Page 103 Automatic Door Locks (Option) Five seconds after the last door is closed, all the doors will lock. You can lock the doors immediately by using All of the doors will lock automatically when you move the power door lock switch or the key chain transmitter. your shift lever out of PARK (P).
Page 104 15 of the FCC Rules. Operation is subject to the following two conditions: If your Chevrolet has this option, you can lock and (1) this device may not cause harmful interference, and unlock your doors and the liftgate from about 3 feet...
Page 105 Check the location. Other vehicles or objects may be blocking the signal. Take a few steps to the left or right, hold the transmitter higher, and again. If you’re still having trouble, see your Chevrolet dealer or a qualified technician for service.
Page 106 Remote Lock Confirmation Remote Power Sliding Door Operation (Option) When you use the key chain transmitter to lock your you have the optional flash vehicle, your park lamps will briefly to let you power sliding door (see If you know the command has been received. press the “Power Sliding Door”...
Page 107 Battery Replacement Matching Transmitter(s) To Your Vehicle Under normal use, the battery in your remote keyless Each remote keyless entry transmitter is coded to prevent another transmitter from unlocking your vehicle. entry transmitter should last about two years. If a transmitter is lost or stolen, a replacement can be You can tell the battery is weak if the transmitter won’t purchased through your dealer.
Page 108 Replacing the Battery in the Remote Transmitter 2. Gently pry the battery out of the transmitter. Do not use the metal flanges to “pop out” the battery. 1. Insert a flat object like a dime into the slot on the side 3.
Page 109 Overhead Console Switchbank Resynchronizing Your Remote Transmitter Your Remote Keyless Entry System uses a continually changing code for increased security. Normally, the receiver in your vehicle will keep track of this changing code. Loss of synchronization will occur if the transmitter while is activated more than 256 times out of range...
Page 110 To move the door forward, you must first pull the door past the open detent position. Does your Chevrolet have a sliding door on the left a little side? If it does, this door is designed to open only if the fuel door is open.
Page 111 Sliding Door Lock Lock the sliding door from inside the vehicle by moving the manual locking lever down. Unlock it by moving the To unlock either sliding door from the outside using lever up. your key, insert the key and turn it toward the rear of the If you have the optional power door locks, the sliding vehicle.
Page 112 Power Sliding Door (Option) To operate the power sliding door, the power sliding door With this option, you can open and close the sliding override switch must be door with switches inside your vehicle. If you have the disabled. This switch is optional remote Keyless Entry System, you can also located in the overhead operate the sliding door with your remote transmitter.
Page 113 When the key is in the ignition in the RUN position, the power sliding door will only open if the transaxle is in PARK (P). The transaxle does not have be in PARK (P) to close the door. I A - - If the override feature is not enabled and the power of closing when sliding door is open or in the process...
Page 114 You or others could be injured if caught in the path of the sliding door. Make sure the door path is clear before closing the door. To manually open the power sliding door when the power sliding door override feature is disabled, pull the inside or outside latch release and let go;...
Page 115 If your vehicle is facing downward on a steep grade (15 percent or more), the door may not stay open and could slam shut, possibly injuring someone. To make sure the door does not slam shut, enable the power sliding door feature. Then if the door closes, it will close under the control of the power door system.
Page 116 See “Fuse Panel” in the Index for more information Sliding Door Child Security Lock about your fuse panel. Your Chevrolet is equipped with a sliding door child If any of these conditions occur, the power sliding door security lock that helps prevent young children or other will need to be reset.
Page 117 use the security lock, move the security lock lever the way up and close door from the outside. If you have the optional power sliding door, disable the power sliding door by pushing the override switch on If you want to open the sliding door when the security the overhead console.
Page 118 Canceling the Sliding Door Security Lock To unlock the liftgate from the outside, turn the key in the cylinder clockwise. To lock the liftgate using the 1. Unlock the sliding door and open the door from key, turn the key counterclockwise. the outside.
Page 119 It can be dangerous to drive with the liftgate open because carbon monoxide (CO) gas can come into your vehicle. You can’t see or smell CO. It can cause unconsciousness and even death. I f you must drive with the liftgate open or if electrical wiring or other cable connections must pass through the seal between the body and the Make sure all windows are shut.
Page 120 Content Theft-Deterrent (Option) While armed, the doors will not unlock with the power lock switch. If your vehicle has this option, it has a theft-deterrent Once armed, the alarm will go off if someone tries to alarm system. enter the vehicle (without using the key chain transmitter or a key), breaks window, tries to damage the vehicle or turns the ignition on.
Page 121 Arming with the Power Lock Switch Arming with Your Key Your alarm system will arm when you use either power Your when you use your key to alarm system will lock switch to lock the doors while door or the lock the doors.
Page 122 When you park your Chevrolet and open the driver’s door, detection sensitivity. Try programming the Content you’ll hear a chime reminding you to remove your key Theft Deterrent to Mode 1.
Page 123 NOTICE: Put them in a storage area, or take them with you. Parking Lots Your modern Chevrolet doesn’t need an elaborate “break-in.” But it will perform better If you park in a lot where someone will be watching in the long run if you follow these guidelines: your vehicle, it’s best to lock it up and take your key.
Page 124 LOCK (B): Ignition Positions This the only position in which remove the key. This locks your steering wheel, ignition With the ignition key in the ignition switch, you can turn and transaxle. the switch to five positions. OFF (C): This position unlocks the steering wheel, ignition and transaxle, but does not send electrical power to any accessories.
Page 125 ACCESSORY and RUN are on positions that allow you to operate your electrical accessories, such as the radio. Don’t try to shift to PARK if your Chevrolet is moving. If you do, you could damage the NOTICE: transaxle. Shift to PARK (P) only when your vehicle is stopped.
Page 126 If it doesn’t start right away, hold your key in NOTICE: START. If it doesn’t start in three seconds (or starts but then stops), push the accelerator pedal about one-quarter of the way down for 12 more seconds, or Your engine is designed to work with the until it starts.
Page 127 Instead trying to list everything here, we ask that you contact To Use the Coolant Heater your Chevrolet dealer in the area where you’ll be 1. Turn off the engine. parking your vehicle. The dealer can give you the best advice for that particular area.
Page 128 Ensure the shift lever is fully in PARK before You or others could be injured. To be sure your starting the engine. Your Chevrolet has a vehicle won’t move, even when you’re on fairly Brake-Transaxle Shift Interlock (BTSI). You have to...
Page 129 REVERSE (R): Use this gear to back up. Shifting out of PARK or N JTRAL (N) while your engine is “racing” (running at high speed) is Shifting to REVERSE (R) while your vehicle is dangerous. Unless your foot is firmly on the moving forward could damage your transaxle.
Page 130 AUTOMATIC OVERDRIVE (D): This position is for NOTICE: normal driving. If you need more power for passing, and you’re: If your vehicle seems to start up rather slowly, or Going less than 35 mph (56 W h ) , push your if it seems not to shift gears as you go faster, accelerator pedal about halfway down.
Page 131 FIRST (1): This position gives you even more power Parking Brake (but lower fuel economy) than SECOND (2). You can use it on very steep hills, or in deep snow or mud. If the To set the parking brake, selector lever is put in FIRST (l), the transaxle won’t hold the regular brake pedal downshift into first gear until the vehicle is going down with your right foot...
Page 132 To release the parking brake, hold the regular brake Shifting Into PARK (P) pedal down with your right foot while you push down foot. (To on the parking brake pedal with your left release the tension on the parking brake cable, you will need to apply about the same amount of pressure parking brake pedal you did when you set the parking...
Page 133 Move the lever up as will 2. Move the shift lever into the PARK (P) position like this: 3. Move the ignition key to the LOCK position. Pull the lever toward you. 4. Remove the key and take it with you. If you can leave your vehicle with the ignition key in your hand, your vehicle is in PARK (P).
Page 134 Leaving Your Vehicle With the Torque Lock Engine Running If you are parking on a hill and you don’t shift your transaxle into PARK (P) properly, the weight of the vehicle may put too much force on the parking pawl in the transaxle.
Page 135 Your Chevrolet has a Brake-Transaxle Shift Interlock PARK (P) as you maintain brake application. Then (BTSI). You have to fully apply your regular brakes move the shift lever into the gear you want. If you ever before you can shift from PARK (P) when the ignition is hold the brake pedal down but still can’t shift out of...
Page 136 Engine Exhaust Parking Over Things That Burn Engine exhaust can kill. It contains the gas carbon monoxide (CO), which you can’t see or smell. It can cause unconsciousness and death. You might have exhaust coming in if: Your exhaust system sounds strange or different.
Page 137 Running Your Engine While CAUTION: You’re Parked It’s better not to park with the engine running. But if you It can be dangerous to get out of your vehicle if ever have to, here are some things to know. the shift lever is not fully in PARK (P) with the parking brake firmly set.
Page 138 Locks and Lighting Choices Your Chevrolet’s locks and lighting systems can be programmed with several different features. The features you can program depend on the options that came with your vehicle. The following chart shows the features that can be programmed and which options you need to have to program them.
Page 139 Leaving Programming Mode To program features, your vehicle must be in the programming mode. Follow these steps: To get out of programming mode, just turn the key from 1. The Content Theft Deterrent system (if equipped) the ACCESSORY position to OFF and put the BCM must be disarmed.
Page 140 To change the factory setting, while in programming Automatic Door Locks mode, do the following: Your vehicle comes with this feature set in Mode 3. This 1. Turn the interior lamps dial all the way to the right means that: and then back slightly to the left.
Page 141 Mode 2: Automatic Locking Only Last Door Closed Locking and Lockout Deterrent Automatic Door Unlocking: Off Your vehicle comes with this feature set in Mode This Automatic Door Locking: Shift out of PARK (P) means that: with the ignition on and the driver’s door closed, and all doors will lock automatically.
Page 142 To change the factory setting, while in programming Remote Driver’s Unlock Control mode, do the following: 2. This Your vehicle comes with this feature set in Mode Press UNLOCK on the power door lock switch. means that: 2. Count the number of chimes you hear. The number When you press UNLOCK on your Remote Keyless of chimes tells you which mode your vehicle is set Entry transmitter, the driver’s door will unlock.
Page 143 Mode 1: Off (Remote lock and unlock confirmation Remote Lock and Unlock Confirmation are disabled.) Your vehicle comes with this feature set in Mode 4. This Mode 2: Remote Lock Confirmation with Exterior means that: Lamps Flashing Only When you use the Remote Keyless Entry transmitter Remote Lock Confirmation: When you use the key to lock your vehicle, your park lamps will flash chain transmitter to lock your vehicle, your park...
Page 144 Mode 4: Remote Lock Confirmation with Exterior To change the factory setting, while in the programming Horn Lamps Flashing and Sounding (On Second mode, do the following: LOCK Press) 1. Turn the park lamps then off. Remote Lock Confirmation: When you use the key 2.
Page 145 Content Theft Deterrent Arming Press the horn symbol on the key chain transmitter. and Disarming Count the number of chimes you hear. The number of chimes tells you which mode your vehicle is set Your vehicle comes with this feature set in Mode 3. This for.
Page 146 Your Content Theft Deterrent system will disarm Your Content Theft Deterrent system will disarm when you unlock the doors with your key or key when you unlock the doors with your key chain chain transmitter. transmitter. Special Note: While This mode provides increased Leaving Programming Mode security, it can be a problem if your key chain To get out of programming mode, just turn the key from...
Page 147 Power Windows (Option) To activate the auto-down feature, push the switch all the way down, then release. The window will lower completely. To stop the window from lowering all the way, pull up the front of the switch. To raise the window, pull up the front of the switch. Side Window Latches The rear of the side windows swings open.
Page 148 Rear Side Panels (Cargo Van) Turn SignaVMultifunction Lever The windows on the cargo van are opaque glass. These operate the same as the rear side windows in the regular van. Horn You can sound the horn by pressing the horn symbols on your steering wheel.
Page 149 If you have a trailer towing option with added wiring for signal move the lever all the way up or down. turn, When turn is finished, the lever will return automatically. the trailer lamps, the signal indicator will flash at normal rate even if a turn signal bulb is burned out.
Page 150 Windshield Wipers Windshield Washer You control the windshield wipers by turning the band To wash your windshield, press and hold the windshield marked WIPER. washer paddle. The washers and wipers will operate. When you release the paddle, the washers will stop, and For a single wiper cycle: Turn the band to MIST.
Page 151 I ’ Cruise Control (Option) Rear Window Wiper and Washer With cruise control, you can maintain a speed of about The rear window wiper mph (40 or more without keeping your foot on kmh) switch is located in the the accelerator. This can really help on long trips. Instrument Panel switchbank.
Page 152 If your vehicle is in cruise control when the optional traction control system begins to limit wheel spin, the cruise control will automatically disengage. (See “Traction Control System” in the Index.) When road conditions allow you to safely use it again, you may turn the cruise control back on.
Page 153 Resuming a Set Speed If you hold the switch at F U A longer than half a second, the vehicle will keep going faster until you release the switch apply the brake. So unless want to go faster, don’t hold the switch at WA. Increasing Speed While Using Cruise Control There are two ways to go to a higher speed:...
Page 154 Reducing Speed While Using Cruise Control to keep your speed down. Of course, applying the brake takes you out of cruise control. Many drivers find this to Push in the SET button at the end of the lever until be too much trouble and don’t use cruise control on you reach the lower speed you want, then release it.
Page 155 Exterior Lamps Turning the dial to this setting turns headlamps, together with: Parking Lamps, Sidemarker Lamps, Taillamps and Instrument Panel Lights. Turning the dial to this setting turns off all the lights. Lamps On Reminder If the driver’s door is opened and you turn the ignition to the OFF or LOCK position while leaving the lamps on, you will hear a warning chime.
Page 156 A light sensor on top of the instrument panel makes the Interior Lamps DRL work, so be sure it isn’t covered. The DRL system Battery Saver will make front park/turn signal lamps come on in daylight when: Your vehicle has a feature to help prevent you from The ignition is on, draining the battery, in case you accidentally leave the interior or underhood lamps on.
Page 157 Instrument Panel Intensity Control Interior Lamps Override Switch Turn the lights control, located below the headlamps This switch is located in the switch, to the right to increase the brightness of the instrument panel lights, and to the left to decrease the switchbank.
Page 158 Illuminated Entry Delayed Illumination With illuminated entry, the interior of your vehicle is The delayed illumination feature will continue to illuminated so you can see inside before you enter your illuminate the interior for 25 seconds after all doors have vehicle.
Page 159 Center Dome Lamp Exit Lighting With exit lighting, the interior lamps will come on for about 25 seconds whenever you remove the key from the ignition switch. If you turn the ignition switch to or ACCESSORY, the lamps will fade out. The lamps will also fade out if you lock the doors with the power door lock switch or the key chain transmitter (if equipped).
Page 160 Rear Reading Lamps Rear Cargo Lamp This lamp is located in the rear of your vehicle, above There are two reading lamps in the third row headliner, the liftgate opening, and has no switch of its own. It will above the outboard seating positions. If your vehicle go on each time you open the doors, unless you enable does not have dual sliding doors, there is also a reading lamp in the second row on the left side.
Page 161 Front Reading Lamps Mirrors Inside Daymight Rearview Mirror There are two reading lamps in the overhead console. To turn on either reading lamp, press the lens of the lamp. To turn off the lamp, press the lens again. To reduce glare from lights behind you, pull the lever toward you (to the night position).
Page 162 Power Remote Control Mirrors Both outside mirrors can be folded forward or rearward. In the rearward position, they will fold almost flush with The control on the driver’s the vehicle. This feature is particularly useful in door controls both outside automatic car washes and when maneuvering your rearview mirrors.
Page 163 Storage Compartments many Your Venture's large carrying capacity can store items. If you have the extended wheelbase version, you can carry things as large as a 4' 8' piece of plywood. You can also use the floor pins that are used to attach the seats, to secure larger loads.
Page 164 Compact Overhead Console Cupholders The front overhead console includes two reading lamps, There are cupholders on the inboard side of the front a switchbank. a storage compartment and passenger seat and the right side of the second row bench seat. turn either reading lamp on or off, press the lamp lens.
Page 165 Removing and Replacing the Tray storage Bin At the base of the center instrument panel console, there is a storage bin. To open the bin, lift the latch release and the door will fold down. Inside the bin, you will find a tray that slides out. Slide the tray all the way toward the rear of the vehicle until the tray locks onto the plastic tabs at the end...
Page 166 Front Seat Storage Net The dividers in the tray can be removed by squeezing the plastic tabs on the bottom of the dividers, while pulling up. Replace the dividers by sliding them down until the tabs click into place. To replace the tray, line up the guides on the bottom of the tray with the guide rails in the storage bin door.
Page 167 Rear Storage Compartments and Cupholders Your Venture has a storage compartment cupholder on either side of the vehicle, next to the third row seat(s). Convenience Net (Option) Attach the upper loops to the posts on either side of the liftgate opening (the label on the net should be in the upper left-hand corner).
Page 168 The side of the convenience net closest to the front of Attach the lower hooks to the metal rings on the floor. the vehicle is higher than the side closest to the liftgate. Once you’ve loaded items into the net, stretch the higher side of the net up and over the top of the load to hold it firmly in place.
Page 169 Side Convenience Nets Luggage Carrier (Option) The side convenience nets are designed to hold smaller items (about 8 Ibs.) than the large convenience net. CAUTION: Attach the loops to the posts on the rear side panels, near the jack storage area. If you try to carry something on top of your vehicle that is longer or wider than the luggage carrier...
Page 170 If you have the optional luggage carrier, you can load things on top of your vehicle. The luggage carrier has slats and side rails attached to the roof, as well as sliding crossrails and places to use for tying things down. These let you load some things on top of your vehicle, as long as they are not wider or longer than the luggage carrier.
Page 171 Your luggage carrier has NOTICE: release knobs set in the ends of each crossrail. Loading cargo that weighs more than 150 lbs. (68 kg) on the luggage carrier may damage your vehicle. When you carry cargo on the luggage carrier of a proper size and weight, put it on the slats, as far forward as you can.
Page 172 Use the adjustable tiedown loops in the side rails to help secure large loads. Reposition the tiedowns by turning them counterclockwise, then slide them-along the side rail. Turn the tiedowns clockwise to tighten them in place. Bumper strips on the luggage carrier crossrails help to Lift the end of the bumper strip with a flathead screw ensure a quieter ride.
Page 173 Ashtray and Cigarette Lighter The ashtray and cigarette lighter are located in the middle section of the instrument panel, below the switchbank. Pull out the drawer to use the ashtray. To remove the ashtray for cleaning, grasp the edge of the ashtray with your fingertips and pull up and out, in a rocking motion.
Page 174 Visor Vanity Mirrors NOTICE: Don’t put papers and other things that burn into your ashtrays. If you do, cigarettes or other smoking materials could set them on fire, causing damage. Side Ashtrays To open the ashtray, press the right side and turn it open. To remove the ashtray for cleaning, press the snuffer as you lift up the bottom of the ashtray.
Page 175 Accessory Power Outlet The front power outlet is located next to the ashtray and lighter. Pull the cover down to use the power outlet. The rear power outlet is located in the rear compartment on the driver’s side. To remove the cover, pull the tab on the cover and pull it off.
Page 176 plug in electrical rne power outlets can D e usea NOTICE: equipment such as a cellular telephone, CB radio, etc. Follow the proper installation instructions that are included with any electrical equipment you install. When using the accessory power outlet: When not in use, always cover the rear outlet with the Maximum load of any electrical equipment protective cap.
Page 177 The air inflator kit is stored in the glove box. It includes Air Inflator System (Option) a 20-foot (6 m) hose with an air pressure gage and Your vehicle may be equipped with an air inflator. With nozzle adapters. it, you can inflate things like air mattresses and basketballs, and you can also use it to bring your tires up to the proper pressure.
Page 178 turn on, If the air inflator system does not the fuse may be blown or installed incorrectly. See “Fuses and Circuit Breakers” in the Index or see your dealer for service. Your air inflator will automatically shut after about minutes. reset, press the ON switch again.
Page 179 The Instrument Panel Your Information System 2-82...
Page 180 Your instrument panel is designed to let you know at a glance how your vehicle is running. You’ll know how fast you’re going, how much fuel you’re using, and many other things you’ll need to drive safely and economically. Refer to the accompanying diagram of your instrument panel to locate the components listed below. A.
Page 181 Instrument Panel Cluster Your cluster includes indicator warning lights and gages that are explained on the following pages.
Page 182 (used in the United States) or kilometers (used in Canada). Your Chevrolet has a tamper-resistant odometer. If you see silver lines between the numbers, you’ll know that someone has probably tried to turn it back, numbers may not be true.
Page 183 Warning Lights, Gages When one of the warning lights comes on and stays on when are driving, or when one of the gages shows and Indicators there may be problem, check the section that tells you what to do about it. Please follow this manual’s advice. This part describes the warning lights and gages that Waiting to do repairs can be costly and even...
Page 184 Air Bag Readiness Light Charging System Indicator Light There is an a i r bag readiness light on the instrument panel, The charging system light which shows a deployed air bag. The system checks the will come on when you turn bag’s electrical system for malfunctions.
Page 185 If the light comes on while you are driving, pull off the Brake System Warning Light road and stop carefully. You may notice that the pedal is Your Chevrolet’s hydraulic brake system is divided into floor. harder to push. Or, the pedal may go closer to the two parts.
Page 186 If the light still stays on, or comes on again Have the vehicle towed for service. (See “Towing Your while you’re driving, your Chevrolet needs service. If Vehicle” in the Index.) the light is on but not flashing and the regular brake system warning light isn’t on, you still have brakes, but...
Page 187 The traction control system warning light may come on Traction Control System Warning Light for the following reasons: (Option) turn the system by pressing the traction This warning light should control button located in the instrument panel come on briefly as you start switchbank, the warning light will come on and stay the engine.
Page 188 TRACTION light will come on. Slippery road Low Traction Light (Option) conditions may exist if this light comes on, so adjust If your vehicle has the your driving accordingly. The light will come on and traction control system, stay on for four seconds when your anti-lock system there will be a LOW adjusts brake pressure for less than four seconds or TRACTION light on the...
Page 189 Engine Temperature Warning Light Engine Coolant Temperature Gage This light will come on when your engine gets hot. Domestic Canadian If this light comes it means that your engine coolant This gage shows the engine coolant temperature. If the has overheated. If you have been operating your vehicle gage pointer moves into the red area, your engine is under normal driving conditions, you should pull off the too hot!
Page 190 To prevent damage to your engine, immediate action Domestic Canadian is required. Your Chevrolet equipped with a computer which See “Engine Coolant” in the Index and have your monitors operation of the fuel, ignition and emission vehicle serviced as soon as possible.
Page 191 This system is called OBD I1 (On-Board This light should come on, as a check to show you it is Diagnostics-Second Generation) and is intended to working, when the ignition is on and the engine is not running. If the light doesn’t come on, have it repaired. assure that emissions are acceptable levels for the life of the vehicle, helping to produce a cleaner...
Page 192 If the light stops flashing and remains on steady, see “If Are you low on fuel? the Light Is On Steady” following. As your engine starts to run out of fuel, your engine may If the light continues to flash, when it is safe to do so, not run as efficiently as designed since small amounts stop the vehicle.
Page 193 Oil Pressure Light CAUTION: Your vehicle is equipped with an oil pressure light. Don’t keep driving if the oil pressure is low. If Your oil pressure light lets you do, your engine can become hot that it you know when you may have a problem with your catches fire.
Page 194 Low Oil Light If you shift the transaxle out of PARK (P) while the of closing, power sliding door is open or in the process If this light comes on, it and the power sliding door override feature is disabled, means your engine is low a buzzer will sound.
Page 195 It takes a little more or less fuel to fill up than the Fuel Gage gage indicated. For example, the gage may have indicated the tank was half full, but it actually took a little more or less than half the tank’s capacity to fill the tank.
Page 196 Section 3 Comfort Controls and Audio Systems In this section, you’ll find out how to operate the comfort control and audio systems offered with your Chevrolet. sure to read about the particular systems supplied with your vehicle. Comfort Controls 3-19...
Page 197 With these systems you can control the heating, cooling to operate. and ventilation in your Chevrolet. Your vehicle also has a flow-through ventilation system described later in Temperature Knob this section.
Page 198 This setting directs air to the windshield and through the floor ducts. This mode is particularly useful during cold or inclement weather because of your Chevrolet Venture’s larger windshield area. DEFROST This setting directs most of the air to the windshield and side window vents.
Page 199 Air Conditioning Heating On very hot days, your vehicle will cool down more Turn the temperature knob to the right (toward the red quickly and economically if you open the windows long area) to warm the air. enough to let hot, inside air escape. For all settings, In the LOWER mode, outside air will be brought in and adjust the temperature control knob and fan speed sent through the floor outlets.
Page 200 Ventilation Tips Ventilation System Keep the hood and front air inlet free of ice, snow or Your vehicle’s flow-through ventilation system supplies any other obstruction (such as leaves). This will outside air into the vehicle when it is moving. Outside allow the heater and defroster to work much better, air will also enter the vehicle when the fan is running.
Page 201 Rear Fan Control Rear Climate Control (If Equipped) This option comes with the Rear Climate Controls. If you have the optional rear climate control, the rear seat passengers can control the temperature and Please keep the area around the base of the center amount of air directed to the rear of the vehicle.
Page 202 Rear Comfort Controls Turn the temperature knob counterclockwise (to the blue area) for cooler air, or clockwise (to the red area) for The rear climate control knobs are in a panel next to the warmer air. second row seat. If your vehicle has the optional dual To maintain a comfortable temperature in the rear, use sliding doors, the Dane1 is above the driver’s seat.
Page 203 Rear Air Vents: To maximize airflow through the rear Defogging and Defrosting heater outlet, place the left bucket seat in the second row To rapidly defrost the windshield, turn the temperature the forward position (see “Adjusting Rear Seats” in control knob all the way clockwise (to the red area) the Index).
Page 204 Do not attach a temporary vehicle license across the Rear Window Defogger defogger grid on the rear window. Press REAR (the light will glow) to warm the NOTICE: defogger grid on the rear window. ’A Don’t use a razor blade or something else sharp on the inside of the rear window.
Page 205 Audio Systems AM-FM Stereo Your Delco@ audio system has been designed to operate easily and give years of listening pleasure. You will get the most enjoyment out of it if you acquaint yourself with it first. Find out what your Delco system and how to operate all its controls, to be sure you’re getting the most out the advanced engineering that...
Page 206 4. Press and hold one of the four numbered buttons, Finding a Station within five seconds. The sound will mute. When it AM-FM: Press the lower knob to switch between AM returns, release the button. Whenever you press that The display shows your selection. numbered button, the station you set will return.
Page 207 Setting the Tone AM-FM Stereo with Cassette Tape Player (If Equipped) BASS: Slide the lever up or down to increase or decrease bass. TREB: Slide the lever up or down to increase or decrease treble. If a station is weak or noisy, you may want to decrease the treble.
Page 208 Finding a Station In addition to the four stations already set, up to three more stations may be preset on each band by pressing AM-FM: Press the lower knob to switch between AM, two adjoining buttons at the same time. Just: FM1 and FM2.
Page 209 While the tape is playing, use the VOL, FADE, BAL, Setting the Tone BASS and TREB controls just as you do for the radio. BASS: Slide the lever up or down to increase Other controls may have different functions when a tape decrease bass.
Page 210 AM-FM Stereo with Cassette Tape Player SCV: Your system has a feature called your Speed-Compensated-Volume (SCV). With SCV, and Automatic Tone Control (If Equipped) audio system adjusts automatically to make up for road and wind noise you drive. Set the volume at the desired level.
Page 211 P.SCAN: SCAN: Press one of the SEEK arrows for two seconds, Press this button to listen to each of your favorite stations stored on your pushbuttons for a few and SCAN will appear on the display. Use SCAN seconds. The radio will scan through each of the stations listen to stations for a few seconds.
Page 212 AUTO TONE: This feature allows you to choose preset Playing a Cassette Tape bass and treble equalization settings designed for Your tape player is built to work best with tapes that are classical, news, rock, pop, country/western and jazz 30 to 45 minutes long on each side. Tapes longer than stations.
Page 213 PREV (1): Press this button or the SEEK left arrow to (4): Press this button to reverse the tape rapidly. search for the previous selection on the tape. Your tape Press it again to return to playing speed. The radio will must have at least three seconds silence between each play the last-selected station while the tape reverses.
Page 214 TAPE AUX: Press this button to change to the tape Rear Seat Audio (If Equipped) function when the radio is on. The tape symbol with an arrow will appear on the display when the tape is active. If your system is equipped with a remote playback device, pressing this button a second time will allow the remote device to play.
Page 215 P.SET PROG: The front passengers must be listening to PWR: Press this button to turn the rear seat audio something different for each of these functions to work: system on or off. The rear speakers will be muted when power is turned You may operate the rear seat Press this button to seek through your preset radio...
Page 216 AM-FM Stereo with Compact Disc Player SCV: has a Your system feature called and Automatic Tone Control (If Equipped) Speed-Compensated-Volume (SCV). With SCV, your audio system adjusts automatically to make up for road and wind noise as you drive. Set the volume at the desired level.
Page 217 SCAN: one of Press the SEEK arrows for two seconds, P.SCAN: Press this button to listen to each of your favorite stations stored on your pushbuttons for a few SCAN will appear on the display. Use SCAN to listen to stations for a few seconds. The radio will go to seconds.
Page 218 AUTO TONE: Playing a Compact Disc This feature allows you to choose preset bass and treble equalization settings designed for Insert a disc partway into the slot, label side up. The classical, news, rock, pop, country/western and jazz player will pull it in. The disc should begin playing. The stations.
Page 219 NEXT ( 3 ) : Press this button or the right SEEK arrow to AM-FM: Press this button to play the radio when a disc go to the next track. If you hold the button or press it more is in the player. The letters CD will go off the display.
Page 220 This feature allows rear seat passengers to listen to a different music source than the front seat passengers including AM-FM automatic tone control, cassette tapes SEEK: Press the up arrow to tune to the next higher or CDs. example, rear seat passengers may listen to station and stay there.
Page 221 P.SET PROG: The fbnt passengers must be listening to Remote Compact Disc Player (If Equipped) something different for each of these functions to work Press this button to seek through your preset radio stations set on your primary radio pushbuttons. When a cassette tape is playing, press this button go to the other side of the tape.
Page 222 PREV (1): Press this button to go back to the A disc that has been ejected but is still sitting in the start of the remote CD player will be pulled back into the player current track if more than eight seconds have played. Press after approximately 30 seconds.
Page 223 RANDOM: Press P.SCAN to enter the random play Theft-Deterrent Feature mode. RANDOM will appear on the display. While in THEFTLOCK” is designed to discourage theft of your this mode, the tracks on the discs will be played in radio. It works by using a secret code to disable all radio random order.
Page 224 5. Press MN and 000 will appear on the display. Activating the Theft-Deterrent Feature 6. Press MN again to make the last two digits agree The instructions which follow, explain how to enter your with your code. secret code to activate the THEFTLOCK system. It is recommended that you read through all nine steps 7.
Page 225 Unlocking the Theft-Deterrent Feature After a Disabling the Theft-Deterrent Feature Power Loss Enter your secret code as follows; pause no more than Enter your secret code as follows; pause no more than 15 seconds between steps: 15 seconds between steps: 1.
Page 226 If the code entered is incorrect, SEC will appear on the Tips About Your Audio System display. The radio will remain secured until the correct Hearing damage from loud noise is almost undetectable code is entered. until it is too late. Your hearing can adapt to higher When battery power is removed and later applied to a volumes of sound.
Page 227 Care of Your Cassette Tape Player NOTICE: A tape player that is not cleaned regularly can cause reduced sound quality, ruined cassettes or a damaged Before you add sound equipment to your mechanism. Cassette tapes should be stored in their like a vehicle tape player, CB radio, mobile...
Page 228 5. Eject the tape after the tape player has been cleaned. thorough cleaning. A scrubbing action cleaning cassette When the cleaning cassette has been ejected, the broken is available through your Chevrolet dealership. tape detection feature is active again. You may also choose a non-scrubbing action, wet-type...
Page 229 Care of Your Compact Discs Integrated Windshield Antenna The antenna in your vehicle is a very thin, metal layer in Handle discs carefully. Store them in their original cases from direct sunlight the windshield. If you look near the edges of the or other protective cases and away and dust.
Page 230 NOTES 3-35...
Page 231 NOTES 3-36...
Page 232 Section 4 Your Driving and the Road Here you’ll find information about driving on different kinds of roads and in varying weather conditions. We’ve also included many other useful tips on driving. Defensive Driving Driving in Rain and on Wet Roads 4-18 Driving Drunk 4-2 1...
Page 233 The best advice anyone can give about driving is: Drive defensively. Please start with a very important safety device in your Chevrolet: Buckle up. (See “Safety Belts” in the Index.) Defensive driving really means “be ready for anything.” On city streets, rural roads or freeways, it means “always expect the unexpected.”...
Page 234 Drunken Driving The obvious way to solve this highway safety problem is for people never to drink alcohol and then drive. But Death and injury associated with drinking and driving what if people do? How much is “too much” if the a national tragedy.
Page 235 Since alcohol is carried in body water, this means that woman generally will reach a higher BAC level than a man of her same body weight when each has the same number of drinks. The law in many U.S. states sets the legal limit at of 0.10 percent.
Page 236 The body takes about an hour to rid itself of the alcohol in one drink. No amount of coffee or number of cold showers will speed that up. “I’ll be careful” isn’t the right answer. What if there’s an emergency, a need to Drinking and then driving is very dangerous.
Page 237 Braking Control of a Vehicle Braking action involves perception time and You have three systems that make your vehicle go where reaction time. you want it to go. They are the brakes, the steering and the accelerator. All three systems have to do their work First, you have to decide to push on the brake pedal.
Page 238 Avoid needless heavy braking. Some people dnve Anti-Lock Brakes (ABS) in spurts heavy acceleration followed by heavy Your vehicle has anti-lock brakes (ABS). ABS is an braking rather than keeping pace with traffic. This advanced electronic brakmg system that will help is a mistake.
Page 239 anti-lock system can change the brake pressure faster than any driver could. The computer is programmed to make the most of available tire and road conditions. Here's how anti-lock works. Let's say the road is wet. You're driving safely. Suddenly an animal jumps out in front of you.
Page 240 Traction Control System (If Equipped) Remember: Anti-lock doesn’t change the time you need to get your foot up to the brake pedal or always decrease Your vehicle may have a traction control system that stopping distance. If you get too close to the vehicle in limits wheel spin.
Page 241 To turn the system off, press When the system is on, this warning light will come the TCS symbol on the to let you know if there’s a bottom of the button in the problem with your traction center console switchbank. control system.
Page 242 Braking in Emergencies The traction you can get in a curve depends on the condition of your tires and the road surface, the angle at With anti-lock, you can steer and brake at the same which the curve banked, and your speed. While you’re many time.
Page 243 Your Chevrolet can perform very well in emergencies like these. First apply your brakes. (See “Braking in Emergencies” earlier in this section.) It is better to remove as much speed as you can from a possible An emergency like this requires close attention and a collision.
Page 244 Off-Road Recovery Passing You may find sometime that your right wheels have The driver of a vehicle about to pass another on a dropped off the edge of a road onto the shoulder while two-lane highway waits for just the right moment, you’.re driving.
Page 245 Do not get too close to the vehicle you want to pass Check your mirrors, glance over your shoulder and while you’re awaiting an opportunity. For one thing, start your left lane change signal before moving out of the right lane to pass. When you are far enough following too closely reduces your area of vision, ahead of the passed vehicle to its front in your...
Page 246 Any sudden changes could cause the tires always possible. to slide. You may not realize the surface is slippery The three types of skids correspond to your Chevrolet’s until your vehicle is skidding. Learn to recognize three control systems. In the braking skid, your wheels...
Page 247 Driving at Night Here are some tips on night driving. Drive defensively. Don’t drink and drive. Adjust your inside rearview mirror to reduce the glare from headlamps behind you..........Since you can’t see as well, you may need to slow down and keep more space between you and other vehicles.
Page 248 Keep your windshield and all the glass on your vehicle clean inside and out. Glare at night is made much No one can see as well at night as in the daytime. But as worse by dirt on the glass. Even the inside of the glass we get older these differences increase.
Page 249 Driving in Rain and on Wet Roads The heavier the rain, the harder it is to see. Even if your windshield wiper blades are in good shape, heavy rain can make it harder to see road signs and traffic signals, pavement markings, the edge of the road and even people walking.
Page 250 CAUTION: Wet brakes can cause accidents. They won’t work as well in a quick stop and may cause pulling to one side. You could lose control of the vehicle. After driving through a large puddle of water or a car wash, apply your brake pedal lightly until your brakes work normally.
Page 251 Driving Through Deep Standing Water Hydroplaning Hydroplaning is dangerous. So much water can build up under your tires that they can actually ride the water. NOTICE: This can happen if the road is wet enough and you’re going fast enough. When your vehicle is hydroplaning, If you drive too quickly through deep puddles or it has little or no contact with the road.
Page 252 Here are ways to increase your safety in city driving: City Driving Know the best way to get to where you are going. Get a city map and plan your trip into an unknown part of the city just as you would for a cross-country trip.
Page 253 At the entrance, there is usually a ramp that leads to the freeway. If you have a clear view of the freeway as you drive along the entrance ramp, you should begin to check traffic. Try to determine where you expect to blend with the flow.
Page 254 Of course, you’ll find experienced and able service experts in When you want to leave the freeway, move to the proper Chevrolet dealerships all across North America. They’ll lane well in advance. If miss your exit, do not, be ready and willing to help if you need it.
Page 255 Hill and Mountain Roads Highway Hypnosis Is there actually such a condition as “highway hypnosis”? Or is it just plain falling asleep at the wheel? Call it highway hypnosis, lack of awareness, or whatever. There is something about an easy stretch of road with the same scenery, along with the hum of the tires on the road, the drone of the engine, and the rush of the wind against the vehicle that can make you sleepy.
Page 256 If you drive regularly in steep country, or if you’re planning to visit there, here are some tips that can make your trips safer and more enjoyable. Keep your vehicle in good shape. Check all fluid NEUTRAL (N) or w Coasting downhill in levels and also the brakes, tires, cooling system ignition off is dangerous.
Page 257 You’ll have a lot less traction or “grip” and will need to very careful. Here are some tips for winter driving: Have your Chevrolet in good shape for winter. You may want to put winter emergency supplies in your vehicle.
Page 258 Whatever the condition -- smooth ice, packed, blowing or loose snow drive with caution. If you have traction control, keep the system on. It will improve your ability to accelerate when driving on a slippery road. Even though your vehicle has a traction control system, you’ll want to slow down and adjust your driving to the road conditions.
Page 259 If You’re Caugh a Blizzard Your anti-lock brakes improve your vehicle’s stability when you make a hard stop on a slippery road. Even though you have an anti-lock braking system, you’ll want to begin stopping sooner than you would on pavement.
Page 260 Tie a red cloth to your vehicle to alert police that you’ve been stopped by the snow. Put on extra clothing or wrap a blanket around you. If you have no blankets or extra clothing, make body Snow can trap exhaust gases under your vehicle. insulators from newspapers, burlap bags, rags , floor This can cause deadly CO (carbon monoxide) gas mats...
Page 261 Run your engine only as long as you must. This saves Loading Your Vehicle fuel. When you run the engine, make it go a little faster than just idle. That is, push the accelerator slightly. This uses less fuel for the heat that you get and it keeps the battery charged.
Page 262 The CertificationEire label also tells you the maximum Electronic Level Control (Option) weights for the front and rear axles, called the Gross On vehicles equipped with the optional electronic level Axle Weight Rating (GAWR). To find out the actual control, the rear of the vehicle is automatically kept loads on your front and rear axles, you need to go to level as you load or unload your vehicle.
Page 263 If you put things inside your vehicle like suitcases, NOTICE: tools, packages or anything else they will go as fast as the vehicle goes. If you have to stop or turn quickly, or if there is a crash, they’ll keep going. Your warranty does not cover parts or components that fail because of overloading.
Page 264 To pull a trailer correctly, follow If you don’t use the correct equipment and drive the advice in this part, and see your Chevrolet properly, you can lose control when you pull a dealer for important information about towing a trailer.
Page 265 That’s the reason for this section. it are many Don’t tow trailer at all during the first miles time-tested, important trailering tips and safety rules. (800 km) your new vehicle is driven. Your engine, Many of these are important for your safety and that of axle or other parts could be damaged.
Page 266 Your Vehicle” in the Index for more information about You can ask your dealer for our trailering information or your vehicle’s maximum load capacity. advice, or you can write us at Chevrolet Customer Assistance Department P.O. Box 7047 Troy, MI 48007-7047...
Page 267 After you’ve loaded your trailer, weigh the trailer and then the tongue, separately, to see if the weights are proper. If they aren’t, may be able get them right simply by moving some items around in the trailer. Total Weight on Your Vehicle’s Tires Be sure your vehicle’s tires are inflated to the upper limit for cold tires.
Page 268 ty Chains It’s important to have the correct hitch equipment. should always attach chains between your vehicle Crosswinds, large trucks going by and rough roads are a and your trailer. Cross the safety chains under the tongue few reasons why you’ll need the right hitch. Here are of the trailer so that the tongue will not drop to the road some rules to follow: if it becomes separated from the hitch.
Page 269 Driving with a Trailer Towing trailer requires certain amount experience. Before setting out for the open road, you’ll want to get know your rig. Acquaint yourself with the feel handling and braking with the added weight of the trailer. And always keep in mind that the vehicle you are driving is now a good deal longer and not nearly as you have a rear-most window open and you responsive as your vehicle is by itself.
Page 270 Following Distance Stay at least twice as far behind the vehicle ahead as would when driving your vehicle without a trailer. This NOTICE: can help you avoid situations that require heavy braking and sudden turns. Making very sharp turns while trailering could Passing cause the trailer to come in contact with the vehicle.
Page 271 Turn Signals When Towing a Trailer If you are towing a trailer that weighs more than 1,000 lbs. (454 kg), you may prefer to drive in have When you tow trailer, your vehicle has to THIRD (3) AUTOMATIC OVERDRIVE (D) instead of extra wiring.
Page 272 When You Are Ready to Leave After Maintenance When Trailer Towing Parking on a Hill Your vehicle will need service more often when you’re pulling a trailer. See the Maintenance Schedule for more Apply your regular brakes and hold the pedal down on this.
Page 273 NOTES 4-42...
Page 274 Section 5 Problems on the Road Here you’ll find what to do about some problems that can occur on the road. If Steam is Coming From Your Engine 5- 13 How to Use Warning Flashers 5- 15 Cooling System Other Types of Warning Devices 5- 17 How to Add Coolant Step-by-step Procedure for Jump Starting...
Page 275 Hazard Warning Flashers Your hazard warning flashers switch is on of the steering column. Press the button in to turn on your flashers. Your hazard warning flashers work no matter what position your key is in, and even if the key isn’t in. To turn off the flashers, push the switch down and it will pop back up by itself.
Page 276 They contain gas that can explode or ignite. another vehicle and some jumper cables to start your They contain enough electricity to burn you. Chevrolet. But please use the following steps listed to do If you don’t follow these steps exactly, some or all it safely.
Page 277 If they are, it could cause a ground your warranty. connection you don’t want. You wouldn’t be able to start your Chevrolet, and the bad grounding could 3. Open the hoods and locate the batteries. damage the electrical systems.
Page 278 Your Chevrolet has a remote positive (+)jump starting terminal. The terminal is under a Using a match near a battery can cause battery tethered cap at the gas to explode. People have been hurt doing this, front of the underhood and some have been blinded.
Page 279 Now connect the black negative cable CAUTION: to the good battery’s negative terminal. can injure you Fans or other moving engine parts badly. Keep your hands away from moving parts once the engine is running. 5. Connect the red positive cable to the positive terminal the vehicle with the dead battery.
Page 280 8. Attach the cable at least 11. Remove the cables in reverse order to prevent 18 inches (45 cm) away electrical shorting. Take care that they don't touch from the dead battery, each other or any other metal. but not near engine parts that move.
Page 281 Towing Your Vehicle a GM to have dealer or a professional towing service tow your vehicle. They can provide the right To help avoid injury to you or others: equipment and know how to tow it without damage. See “Roadside Assistance” in the Index. Never let passengers ride in a vehicle that is being towed.
Page 282 When your vehicle is being towed, have the ignition key in the OFF position. The steering wheel should be clamped in a straight-ahead position, with a clamping device designed for towing service. Do not use the A vehicle can fall from a car carrier if it isn’t vehicle’s steering column lock for this.
Page 283 Towing From the Front NOTICE: Tow Limits 55 mph (80 kmbh), 500 miles (800 krn) Do not tow with sling-type equipment or the front bumper system will be damaged. Use wheel-lift or car-carrier equipment. Additional ramping may be required for car-carrier equipment.
Page 284 Towing From the Rear NOTICE: A towing dolly must be used under the front wheels when towing from the reai: Do not tow with sling-type equipment or the rear bumper system will be damaged. Use wheel-lift or car-carrier equipment. Additional ramping may be required for car-carrier equipment.
Page 285 Engine Overheating NOTICE: You will find a coolant temperature gage on your Chevrolet’s instrument panel. See “Engine Coolant After driving in the overheated engine protection Temperature Gage” in the Index. You also have a low operating mode, to avoid engine damage, allow coolant level light on your instrument panel.
Page 286 If Steam Is Coming From Your Engine from Steam an overheated engine can burn badly, even if you just open the hood. Stay away from the engine if you see or hear steam coming from it. Just turn it off and get everyone away from the vehicle until it cools down.
Page 287 If No Steam Is Coming From Your Engine If you no longer have the overheat warning, you can drive. Just to be safe, drive slower for about 10 minutes. If you get the overheat warning but or hear no If the warning doesn’t come back on, steam, the problem may not be too serious.
Page 288 When you decide it’s safe to lift the hood, here’s what you’ll see: CAUTION: An electric fan under the hood can start up even when the engine is not running and can injure you. Keep hands, clothing and tools away from any underhood electric fan.
Page 289 heater and radiator hoses, and other engine parts, can be very hot. Don’t touch them. do, you can be burned. Don’t run the engine if there is a leak. If you run the engine, it could lose all coolant. That could cause an engine fire, and you could be burned.
Page 290 How to Add Coolant to the Coolant NOTICE: Recovery Tank If you haven’t found a problem yet, but the coolant level In cold weather, water can freeze and crack the isn’t at or above the FULL HOT mark, add a 50/50 engine, radiator, heater core and other parts.
Page 291 U‘KlON at high speed. Never turn the cap when the You can be burned if you spill coolant on hot cooling system, including the radiator pressure engine parts. Coolant contains ethylene glycol cap, is hot. Wait for the cooling system and the and it will burn if the engine parts are hot radiator pressure cap to cool if you ever have to enough.
Page 292 1. You can remove the radiator pressure cap when the How to Add Coolant to the Radiator cooling system, including the radiator pressure cap and upper radiator hose, is no longer hot. Turn the pressure cap slowly counterclockwise until it first stops.
Page 293 2. Then keep turning the pressure cap, but now push 3. Fill the radiator with the proper DEX-COOL@ down as you turn it. Remove the pressure cap. coolant mixture, up to the base of the filler neck. 5-20...
Page 294 4. Start the engine and let it run until you can feel the Then replace the pressure cap. At any time during upper radiator hose getting hot. Watch out for the this procedure if coolant begins to flow out of the engine fans.
Page 295 If a tire goes flat, the next part shows how to use your jacking equipment to change a flat tire safely. Air Inflator (Option) Your vehicle may have an air inflator used to bring tires up to the proper pressure. See “Air Inflator” in the Index for more details.
Page 296 Changing a Flat Tire If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on your hazard warning flashers. Changing a tire can cause an injury. The vehicle can slip off the jack and roll over you or other people.
Page 297 Removing the Spare Tire and Tools JACK The equipment you’ll need is in the storage compartment at the rear of the vehicle, on the passenger’s side. BRACKET L ! t S T R A P Remove the side convenience nets. Open the jack storage compartment by lifting up the tab and...
Page 298 HOIST ASSEMBLY EXTENSION END) (CHISEL RETAINER SPARE TIRE STORED UNDER REAR COMPARTMENT FLOOR (VALVE STEM DOWN) The compact spare tire is located under the vehicle, ahead of the rear bumper. Insert the narrow end of the shaft into the hole above the rear bumper. Then attach Slide the cable retainer through the center the spare, the folding wrench to the shaft.
Page 299 Removing the Flat Tire and Installing the 1. If your vehicle has aluminum wheels, each wheel nut is covered with a nylon cap. Use the handle of the folding wrench to fist pry the large center cap off. Then with the other end of the wrench, remove the nylon caps from the wheel nuts before you...
Page 300 3. Loosen the wheel nuts -- but do not remove them using the folding wrench. (Turn the handle about 180°, then flip the handle back to the starting position. This avoids taking the wrench off the lug nut for each turn.) 2.
Page 301 ‘ 4. Near each wheel, CAUTION: there is a notch in the vehicle’s body. Position the jack and raise the Getting under a vehicle when it is jacked up is jack head until it fits dangerous. If the vehicle slips off the jack, you firmly into the notch could be badly injured or killed.
Page 302 7. Remove any rust or dirt from the wheel bolts, mounting surfaces and spare wheel. Raising your vehicle with the jack improperly positioned can damage the vehicle and even make the vehicle fall. To help avoid personal injury and vehicle damage, be sure to fit the jack lift head into the proper location before raising the vehicle.
Page 303 Never use oil or grease on studs or nuts. If you do, the nuts might come loose. Your wheel could fall off, causing a serious accident. 8. Install spare tire and replace the wheel nuts with the rounded end of the nuts toward the wheel. Tighten each nut hand until the wheel is held against the hub.
Page 304 10. Tighten the wheel nuts firmly in criss-cross sequence, as shown. Stop somewhere as soon as you can and have the nuts tightened with a torque wrench to 100’lb-ft (140 Nom). NOTICE: Improperly tightened wheel nuts can lead to brake pulsation and rotor damage. To avoid expensive brake repairs, evenly tighten the wheel nuts in the proper sequence and to the proper Incorrect wheel nuts or improperly tightened...
Page 305 Keep raising the wheel until hear the hoist mechanism NOTICE: click twice. This means the wheel is f i i y stored against the underside of the vehicle. Push against the wheel to be sure it does not move and is stored securely. Wheel covers won’t fit on your compact spare.
Page 306 Unless you have the plastic “bolt-on” wheel covers, be NOTICE: sure to also store the nylon nut caps and the center cap. When you replace the compact spare with a full-size tire, replace the bolt-on wheel covers or the nylon nut When the compact spare is installed, don’t take caps and the center cap.
Page 307 If You’re Stuck: In Sand, Mud, NOTICE: Ice or Snow What you don’t want to do when your vehicle is stuck is Spinning your wheels can destroy parts of your to spin your wheels too fast. The method known as vehicle as well as the tires.
Page 308 NOTES...
Page 309 NOTES 5-36...
Page 310 Section 6 Service and Appearance Care Here you will find information about the care of your Chevrolet. This section begins with service and fuel information, and then it shows how to check important fluid and lubricant levels. There is also technical information about your vehicle, and a part devoted to its appearance care.
Page 311 If you want to do some of your own service work, you’ll Your Chevrolet dealer knows your vehicle best and want to use the proper Chevrolet Service Manual. It tells wants you to be happy with it. We hope you’ll go to you much more about how to service your Chevrolet than your dealer for all your service needs.
Page 312 Things you might add to the outside of your vehicle can you have a problem. affect the airflow around This may cause wind noise and affect windshield washer performance. Check with your Chevrolet dealer before adding equipment to the outside of your vehicle.
Page 313 Chevrolet dealer for diagnosis to determine the cause of failure. In the event it is determined that the cause of the condition is the type of fuels used, repairs NOTICE: may not be covered by your warranty.
Page 314 Filling Your Tank Fuels in Foreign Countries If you plan on driving in another country outside the When the fuel door is opened on a vehicle with dual United States or Canada, the proper fuel may be hard to sliding doors, the driver’s side sliding door will only find.
Page 315 CAUTION: Gasoline vapor is highly flammable. It burns violently, and that can cause very bad injuries. Don’t smoke if you’re near gasoline or refueling your vehicle. Keep sparks, flames and smoking materials away from gasoline. While refueling, hang the cap by the tether from the hook on the filler door hinge.
Page 316 See “Cleaning the and your fuel tank and emissions system may be Outside of Your Chevrolet” in the Index. damaged. See “Malfunction Indicator Lamp” in the Index.
Page 317 Hood Release Checking Things Under the Hood An electric fan under the hood can start up and injure you even when the engine is not running. Keep hands, clothing and tools away from any underhood electric fan. CAUTION: Things that burn can get on hot engine parts and To open the hood, first pull the hood release handle start a fire.
Page 318 The hood prop may be hot due to increased engine temperatures under the hood, so be careful when handling it. Use your hood prop sleeve when handling the hood prop. Then go to the front of the vehicle and push up on the underhood release.
Page 319 When lift the hood, you'll see these items: A. Underhood Fuse and Relay Center G. Engine Oil Dipstick B. Remote PositiveTerminal H. Transaxle Fluid Dipstick C. Windshield Washer Fluid Reservoir I. Brake Master Cylinder D. Radiator Pressure Cap J. Air Cleaner K.
Page 320 Pull forward on the hood prop to release it from its It’s a good idea to check your engine oil every time you get fuel. In order to get an accurate reading, the oil must storage clip. Then put the end of the hood prop into the slot in the underside of the hood.
Page 321 Checking Engine Oil When to Add Oil Pull out the dipstick and clean it with a paper towel or the oil is at or below the ADD mark, then you’ll need cloth, then push it back all the way. Remove it again, to add at least one quart of oil.
Page 322 Be sure to fill it enough to put the level somewhere in RECOMMENDEO SAE VISCOSITY GRADE ENGINE OILS the proper operating range. Push the dipstick all the way FOR BEST FUEL ECONOMY AND COLD STARTlN6, SELECT THE LOWEST back in when you’re through. SAE VISCOSITY GRADE OIL FOR THE EXPECTED TEMPERATURE RANGE.
Page 323 NOTICE: Engine Oil Additives Use only engine oil with the American Petroleum Don’t add anything to your oil. Your Chevrolet dealer is Institute Certified For Gasoline Engines ready to advise if you think something should be added. “Starburst” symbol. Failure to use the...
Page 324 What to Do with Used Oil Most trips include extensive idling (such as frequent driving in stop-and-go traffic). Did you know that used engine oil contains certain Most trips are through dusty areas. elements that may be unhealthy for your skin and could even cause cancer? Don’t let used oil stay on your skin You frequently tow a trailer or use a carrier on top of for very long.
Page 325 Checking or Replacing the Air Cleaner Air Cleaner Unlatch the two hooks on top of the cleaner housing. Turn back the air inlet panel and rest it on top of the housing. The air intake tube is designed to flex back; you do not need to disconnect it.
Page 326 The access panel for the pollen filter is in the back of the NOTICE: glove box. 1. Pull the tab up and out on the outer access panel. If the air cleaner is off, a backfire can cause a damaging engine fire. And, dirt can easily get into your engine, which will damage it.
Page 327 Automatic Transaxle Fluid When to Check and Change good time to check your automatic transaxle fluid level is when the engine oil is changed. Change both the fluid and filter every 50,000 miles (83 000 km) if the vehicle is mainly driven under one or more of these conditions: In heavy city traffic where the outside temperature regularly reaches 90°F (32°C) or higher.
Page 328 Because this operation can be little difficult, you may (82°C to 93°C). choose to have this done at your Chevrolet dealership Get the vehicle warmed up by driving about 15 miles Service Department. (24 km) when outside temperatures are above 50°F...
Page 329 Then, without shutting off the engine, follow these steps: 3. Check both sides of the dipstick, and read the lower level. The fluid level must be in the cross-hatched area. 1 . The dipstick is located toward the back of the engine 4.
Page 330 How to Add Fluid Engine Coolant Refer to the Maintenance Schedule to determine what The cooling stem in your vehicle is filled with kind of transaxle fluid to use. See “Recommended DEX-COOL engine coolant. This coolant is designed Fluids and Lubricants” in the Index. to remain in your vehicle for years or 150,000 miles (240 000 km) whichever occurs first, if you add only...
Page 331 NOTICE: When adding coolant, it is important that you use Adding only plain water to your cooling system can only DEX-COOL@ (silicate-free) coolant. be dangerous. Plain water, or some other liquid like wi l l . If coolant other than DEX-COOL@ is added to alcohol, can boil before the proper coolant mix the system, premature engine, heater core or Your vehicle’s coolant warning system is set for the...
Page 332 Checking Coolant NOTICE: The engine coolant reservoir is located on the driver’s side of the vehicle, above the air cleaner. If you use an improper coolant mix, your engine could overheat and be badly damaged. The repair cost wouldn’t be covered by your warranty.
Page 333 If this light comes on, it means you're low on engine coolant. 1 + 1 "urning the radiator pressure cap when the engine and radiator are hot can allow steam and scalding liquids to blow out and burn you badly. t a n k , With the coolant recovery you will almost...
Page 334 Power Steering Fluid Radiator Pressure Cap NOTICE: Your radiator cap is a 15 psi (105 kPa) pressure-type cap and must be tightly installed to prevent coolant loss and possible engine damage from overheating. Be sure the arrows on the cap line up with the overflow tube on the radiator filler neck.
Page 335 When to Check Power Steering Fluid Windshield Washer Fluid It is not necessary to regularly check power steering What to Use fluid unless you suspect there is a leak in the system or When you need windshield washer fluid, be sure to read you hear an unusual noise.
Page 336 Brakes NOTICE: Brake Fluid When using concentrated washer fluid, follow the manufacturer’s instructions for adding water. Don’t mix water with ready-to-use washer fluid. Water can cause the solution to freeze and damage your washer fluid tank and other parts of the washer system. Also, water doesn’t clean as well as washer fluid.
Page 337 There are only two reasons why the brake fluid level in the reservoir might go down. The first is that the brake fluid CAUTION: goes down to acceptable level during normal brake lining wear. When new linings are put in, the fluid level If you have too much brake fluid, it can spill on the goes back up.
Page 338 What to Add NOTICE: When you do need brake fluid, use only DOT-3 brake fluid such as Delco Supreme 11’ (GM P a r t Using the wrong fluid can badly damage No. 12377967). Use new brake fluid from a sealed brake system parts.
Page 339 Brake Wear NOTICE: Your Chevrolet has front disc brakes and rear d r u m brakes. Disc brake pads have built-in wear indicators that make a Continuing to drive with worn-out brake pads high-pitched warning sound when the brake pads are worn could result in costly brake repair.
Page 340 Brake Pedal Travel Battery See your dealer if the brake pedal does not return Every new Chevrolet has a Delco Freedom@ battery. normal height, or if there is rapid increase in pedal You never have to add water to one of these. When it’s travel.
Page 341 Jump Starting Headlamps For jump starting instructions, see “Jump Starting” in 1. Open the hood. the Index. 2. Remove the front parking/turn signal lamp assembly. See “Front ParkingRurn Signal Lamps” later in Bulb Replacement this section. For the type of bulbs, see “Replacement Bulbs” in the Index.
Page 342 3. Remove the two wing nuts located on top of the 4. Unscrew the black retainer ring that holds the bulb headlamp assembly. assembly in place, and pull the bulb assembly out of the lamp housing. 6-33...
Page 343 Unhook the electrical connector by lifting up the blue tabs and pulling the bulb out. 6. Replace the new bulb through the black retainer ring and into the electrical connector. Push the bulb firmly enough so that the blue tabs hook over the tab on the bulb.
Page 344 Front P a r k i n m r n Signal Lamps 1. Open the hood. 2. Remove the thumb screw attaching the parking/turn signal lamp assembly to the headlamp assembly. 8. Align the pins on the bottom of the headlamp assembly with the holes in the lamp support bracket while placing the holes in the assembly over the bolts where the wing nuts attach.
Page 345 4. Unscrew the bulb sockets from the lamp assembly by pressing the tab while turning counterclockwise. To replace the lamp assembly, line up and insert the tabs on the back of the assembly with the slots in the fender. Engage the lower clip on the front of the 5.
Page 346 Front Sidemarker 4. Unscrew the bulb sockets from the lamp assembly by turning counterclockwise. 1. Open the hood. 2. Remove the thumb screw attaching the parking/tum signal lamp assembly to the headlamp assembly. 5. Replace the bulb by pulling the old one out and gently pushing the new one into the lamp socket.
Page 347 Taillamps 1. Open the liftgate. 2. Remove the two screws from the taillamp housing on the inboard side. P u l l off the entire taillamp housing. The locator/retaining pins on the outboard side are part of the lamp assembly and will remain intact during removal.
Page 348 The blades are seated. Secure with the inboard screws. more accessible for removalheplacement while in this position. For any bulb changing procedure not listed in this section, contact your Chevrolet dealer service department. 6-39...
Page 349 You could have an air-out and a serious accident. See “Loading Your Vehicle” in Tires the Index. Your new Chevrolet comes with high-quality tires made Underinflated tires pose the same danger as by a leading tire manufacturer. If you ever have overloaded tires. The resulting accident questions about your tire warranty and where to obtain could cause serious injury.
Page 350 Inflation Tire Pressure NOTICE: (Continued) The Certificatioflire label, which is on the rear edge of the driver’s door, shows the correct inflation pressures If your tires have too much air (overinflation), means for your tires when they’re cold. 44Cold” your you can get the following: vehicle has been sitting for at least three hours or driven Unusual wear...
Page 351 Tire Inspection and Rotation Don’t include the compact spare tire in your tire rotation. Tires should be rotated every 6,000 to 8,000 miles After the tires have been rotated, adjust the front (10 000 to 13 000 Any time you notice unusual km).
Page 352 When It’s Time for New Tires The tire has bump, bulge or split. The tire has a puncture, cut or other damage that One wav to tell when it’s can’t be repaired well because of the size or location time for new tires is to of the damage.
Page 353 not apply to deep tread, winter-type snow tires, space-saver or temporary use spare tires, tires with CAUTION: nominal rim diameters of 10 to 12 inches (25 to 30 cm), or to some limited-production tires. Mixing tires could cause you to lose control while While the tires available on General Motors passenger driving.
Page 354 Warning: The temperature grade for this tire is Traction A, B, C established for a tire that is properly inflated and not The traction grades, from highest to lowest, are A, B, overloaded. Excessive speed, underinflation, or and C, and they represent the tire’s ability to stop on wet excessive loading, either separately or in combination, pavement as measured under controlled conditions on can cause heat buildup and possible tire...
Page 355 See your It could affect the braking and handling of your Chevrolet dealer if any of these conditions exist. vehicle, make your tires lose air and make you Your dealer will know the kind of wheel you need.
Page 356 Tire Chains Used Replacement Wheels NOTICE: Use tire chains only where legal and only when Putting a used wheel on your vehicle is you must. Use only Class “S” type chains dangerous. You can’t know how it’s been used or that are the proper size for your tires.
Page 357 Never use these to clean your vehicle: dirt. Wipe vinyl or leather with clean, damp cloth. Gasoline Your Chevrolet dealer has two cleaners, a solvent-type Benzene spot lifter and a foam-type powdered cleaner. They will clean normal spots and stains very well. Do not use Naphtha them on vinyl or leather.
Page 358 Using Solvent-Type Cleaner on Fabric Using Foam-Type Cleaner on Fabric Vacuum and brush the area to remove any loose dirt. First, see if you have to use solvent-type cleaner at all. Some spots and stains will clean off better with just Always clean a whole trim panel or section.
Page 359 Special Cleaning Problems 3. If an odor lingers after cleaning vomit or urine, treat the area with a waterhaking soda solution: Greasy or Oily Stains 1 teaspoon (5 ml) of baking soda to 1 cup (250 ml) of lukewarm water. Stains caused by grease, oil, butter, margarine, shoe polish, coffee with cream, chewing gum, cosmetic 4.
Page 360 Cleaning the Top of the Instrument Panel Care of Safety Belts and Built-in Child Restraint Harness Use only mild soap and water to clean the top surfaces of the instrument panel. Sprays containing silicones or Keep the safety belts and the built-in child restraint waxes may cause annoying reflections in the windshield harness clean and dry.
Page 361 Clean the outside of the windshield with GM Cleaning Glass Surfaces Windshield Cleaner Bon Ami’ Powder (non-scratching Glass should be cleaned often. GM Glass Cleaner (GM glass cleaning powder), GM Part No. 105001 1. The P a r t No. 1050427) or a liquid household glass cleaner form when you rinse windshield is clean if beads do not will remove normal tobacco smoke and dust films on...
Page 362 Finish Care The best way to preserve your vehicle’s finish is to keep it Occasional waxing or mild polishing of your Chevrolet clean by washing it often with lukewarm or cold water. by hand may be necessary to remove residue from the Don’t wash your vehicle in the direct rays of the sun.
Page 363 You can help to keep the paint finish looking When applying a tire dressing always take care to new by keeping your Chevrolet garaged or covered whenever possible. wipe off any overspray or splash from all painted surfaces on the body or wheels of the vehicle.
Page 364 Although no defect in the paint job causes this, Underbody Maintenance Chevrolet will repair, at no charge to the owner, the surfaces of new vehicles damaged by this fallout Chemicals used for ice and snow removal and dust control condition within 12 months or 12,000 miles (20 000 km) can collect on the underbody.
Page 365 Appearance Care Materials Chart See “Fluids and Lubricants” in the Index. 6-56...
Page 366 This is the legal identifier for your Chevrolet. It appears Be sure that this label is not removed from the vehicle. on a plate in the front corner of the instrument panel, on the driver’s side.
Page 367 Your vehicle has an air bag system. Before attempting to windows and other power accessories. When the current add anything electrical to your Chevrolet, see “Servicing load is too heavy, the circuit breaker opens and closes, Your Air Bag-Equipped Chevrolet” in the Index.
Page 368 Fuses and Circuit Breakers Instrument Panel Fuse Block wiring circuits in your vehicle are protected from The instrument panel fuse fuses, short circuits by a combination of circuit breakers block is the right of the and fusible thermal links. glove box. Pull the door open to access the Look at the silver-colored band inside the fuse.
Page 369 FUSE USAGE CHART FUSES ABS MDL BATT Electronic Brake Traction CIRCUIT ABSflCS ION BREAKERS Control Module (EBTCM) ELEC PRNDL RR DEFOG €LC ..ABS SOL LH and RH Front Brake HEADLAMP FRT PWR SCKT CTSY LAMP PWR MIRROR CIGARRLC Solenoid Valve .
Page 370 FUSES FUSES ..HVACLDRL Air Recirculation Motor, DRL PWR QTR VENT Interior Lamps and Control Module, Heater-A/C Multifunction Switch (Power Control, Temperature Door Vent Switch) Actuator (Front) and Rear ..RR HVAC Rear Blower Motor, Rear Window Defogger Relay...
Page 371 Underhood Fuse and Relay Center This fuse and relay center is located in the engine Maxi Fuse ..compartment, in front of the windshield washer 1-COOL FAN 2 Coolant Fans fluid reservoir. 3-HEADLAMPS Circuit Breakers: FRT HVAC HI BLWR, and HEADLAMP The fuses marked spare are available if a replacement Fuses (UP): HAZARD and...
Page 372 Mini Fuse Maxi Fuse ..4-BATT MAIN 2 ..Circuit Breaker: PWR 18-INJ Fuel Injectors 1-6 SEATRSD. Fuses (UP): ELC 21 -1GN 1 -UH . Evaporative Emissions and RR DEFOG (EVAP) Canister Purge .
Page 373 Replacement Bulbs Mini Fuse ..30-ALT SENSE Generator Lamps Exterior Bulb Number ... -TCC Automatic Transaxle (Torque ......Headlamps 9004-HBI Converter Clutch Solenoids) Front Parking/Turn Stoplamp Switch to PCM ... Signal Lamps 3 157NA or 3 157 NAK .
Page 374 Filter Change refrigerant, be sure the proper refrigerant is used. Fuel Capacity If you ’re not sure, ask your Chevrolet dealex ....Standard (RWB) . 2 0 gallons (76 L) .
Page 375 Engine Specifications Vehicle Dimensions Regular Wheel Base ........... Engine VLN Code. Length 186.9” (474.6 cm) ............Engine Type 72.0” (183.0 cm) Width ..........Firing Order 1-2-3-4-5-6 Height 67.4” (171.2 cm) ..........Horsepower Wheelbase 112”(284.5 cm) ....
Page 376 Section 7 Maintenance Schedule This section covers the maintenance required for your Chevrolet. Your vehicle needs these services to retain its safety, dependability and emission control performance. Introduction to Your Maintenance Schedule 7-37 Owner Checks at Each Fuel Fill-up Your Vehicle and the Environment...
Page 377 Some of these Warranty and Owner Assistance booklet, or your services can be complex, so unless you are technically Chevrolet dealer for details. qualified and have the necessary equipment, you should let your dealer’s service department or another qualified...
Page 378 “Part C: Periodic Maintenance Inspections” explains important inspections that your Chevrolet dealer’s service department or another qualified service center should perform. Performing maintenance work on a vehicle can “Part Recommended Fluids and Lubricants” lists be dangerous. In trying to do some jobs, you can some products GM recommends to help keep your be seriously injured.
Page 379 Chevrolet dealer. This part tells you the maintenance services you should have done and when you should schedule them. If you go to your dealer for your service needs, you’ll know that GM-trained and supported service people will perform the work using genuine GM parts.
Page 380 Maintenance Schedule Short Trip/City Definition Short Trip/City Intervals ~~~~~ Every 3,000 Miles 000 km): Engine Oil and Filter Follow the Short TripKity Maintenance Schedule if any Change (or 3 months, whichever occurs first). one of these conditions is true for your vehicle: Every 6,000 Miles (10 000 km): Tire Rotation.
Page 381 Maintenance Schedule Long Tripmighway Dc,,nition Every 7,500 Miles (12 km): Engine Oil and Filter Follow this maintenance schedule only if none of the Change (or every 12 months, whichever occurs first). conditions from the Short Trip/City Maintenance Schedule is true. Do not use this schedule if the vehicle Tire Rotation.
Page 382 Short Trip/City Maintenance Schedule 3,000 Miles (5 000 km) The services shown in this schedule up to 100,000 miles Change engine oil and filter (or every (166 000 should be performed after 100,000 miles 3 months, whichever occurs first). (166 000 at the same intervals.
Page 383 c’lort TripKity Maintenance Schedule 9,000 Miles (15 000 km) 6,000 Miles (10 000 km) Change engine oil and filter (or every Change engine oil and filter (or every 3 months, whichever occurs first). 3 months, whichever occurs first). An Emission Control Service. An Emission Control Service.
Page 384 Short TripKity Maintenance Schedule 12,000 Miles (20 000 km) 15,000 Miles (25 000 km) Change engine oil and filter (or every Change engine oil and filter (or every 3 months, whichever occurs first). 3 months, whichever occurs first). An Emission Control Service. An Emission Control Service.
Page 385 Short Tkip/City Maintenance Schedule 18,000 Miles (30 000 km) 21,000 Miles (35 000 km) Change engine oil and filter (or every Change engine oil and filter (or every 3 months, whichever occurs first). 3 months, whichever occurs first). An Emission Control Service. An Emission Control Service.
Page 386 Short Trip/City Maintenance Schedule 24,000 Miles (40 000 km) 27,000 Miles (45 000 km) Change engine oil and filter (or every Change engine oil and filter (or every 3 months, whichever occurs first). 3 months, whichever occurs first). An Emission Control Service. An Emission Control Service.
Page 387 Short Trip/City Maintenance Schedule 30,000 Miles (50 000 km) 33,000 Miles (55 000 km) Change engine oil and filter (or every Change engine oil and filter (or every 3 months, whichever occurs first). 3 months, whichever occurs first). An Emission Control Service. An Emission Control Service.
Page 388 Short Trip/City Maintenance Schedule 36,000 Miles (60 000 km) 39,000 Miles (65 000 km) Change engine oil and filter (or every Change engine oil and filter (or every 3 months, whichever occurs first). 3 months, whichever occurs first). An Emission Control Service. An Emission Control Service.
Page 389 Short TripKity Maintenance Schedule 42,000 Miles (70 000 km) 45,000 Miles (75 000 km) Change engine oil and filter (or every Change engine oil and filter (or every 3 months, whichever occurs first). 3 months, whichever occurs first). An Emission Control Service. An Emission Control Service, Inspect air cleaner filter if you are driving Rotate tires.
Page 390 Short Trip/City Maintenance Schedule 48,000 Miles (80 000 km) 50,000 Miles (83 000 km) Change engine oil and filter (or every Change automatic transaxle fluid and filter 3 months, whichever occurs first). if the vehicle is mainly driven under one or more of these conditions: An Emission Control Service.
Page 391 Short Trip/City Maintenance Schedule 51,000 Miles (85 000 km) 50,000 Miles (83 000 km) (Continued) Change engine oil and filter (or every When doing frequent trailer towing. 3 months, whichever occurs first). - Uses such as found in taxi, police or An Emission Control Service.
Page 392 Short TripKity Maintenance Schedule 54,000 Miles (90 000 km) 57,000 Miles (95 000 km) Change engine oil and filter (or every Change engine oil and filter (or every 3 months, whichever occurs first). 3 months, whichever occurs first). An Emission Control Service. Service.
Page 393 Short TripKity Maintenance Schedule 60,000 Miles (100 000 km) Inspect fuel tank, cap and lines for damage Change engine oil and filter (or every or leaks. Inspect fuel cap gasket for any 3 months, whichever occurs first). damage. Replace parts as needed. An Emission Control Service.
Page 394 Short TripKity Maintenance Schedule 63,000 Miles (105 000 km) 66,000 Miles (110 000 km) Change engine oil and filter (or every Change engine oil and filter (or every 3 months, whichever occurs first). 3 months, whichever occurs first). An Emission Control Service. An Emission Control Service.
Page 395 Short TriplCity Maintenance Schedule 72,000 Miles (120 000 km) 69,000 Miles (115 000 km) Change engine oil and filter (or every Change engine oil and filter (or every 3 months, whichever occurs first). 3 months, whichever occurs first). An Emission Control Service. An Emission Control Service.
Page 396 Short TripKity Maintenance Schedule 75,000 Miles (125 000 km) 78,000 Miles (130 000 km) Change engine oil and filter (or every Change engine oil and filter (or every 3 months, whichever occurs first). 3 months, whichever occurs first). An Emission Control Service. An Emission Control Service.
Page 397 Short Trip/City Maintenance Schedule 84,000 Miles (140 000 km) 81,000 Miles (135 000 km) Change engine oil and filter (or every Change engine oil and filter (or every 3 months, whichever occurs first). 3 months, whichever occurs first). An Emission Control Service. An Emission Control Service.
Page 398 Short Trip/City Maintenance Schedule 90,000 Miles (150 000 km) 87,000 Miles (145 300 km) Change engine oil and filter (or every Change engine oil and filter (or every 3 months, whichever occurs first). 3 months, whichever occurs first). An Emission Control Service. An Emission Control Service.
Page 399 Short Trip/City Maintenance Schedule 93.000 Miles (155 000 km) 96,000 Miles (160 000 km) Change engine oil and filter (or every Change engine oil and filter (or every 3 months, whichever occurs first). 3 months, whichever occurs first). An Emission Control Service. An Emission Control Service.
Page 400 Short Tkip/City Maintenance Schedule 99,000 Miles (165 000 km) 100,000 Miles (166 000 km) Change engine oil and filter (or every Inspect spark plug wires. 3 months, whichever occurs first). An Emission Control Service. An Emission Control Service. Replace spark plugs. An Emission Control Service.
Page 401 Short TripKity Maintenance Schedule 150,000 Miles (240 000 km) 100,000 Miles (I 66 000 km) (Continued) When doing frequent trailer towing. Drain, flush and refill cooling system (or every 60 months since last service, Uses such as found in taxi, police or whichever occurs first).
Page 402 7,500 Miles (12 Change engine oil and filter (or every The services shown in this schedule up to 100,000 miles (166 000 100,000 km) should be performed after miles 12 months, whichever occurs first). at the same intervals. The services shown (166 000 k m ) An Emission Control Service.
Page 403 Long Tripmighway Maintenance Schedule M i l e s (25 000 km) 15,000 22,500 Miles (37 500 km) Change engine oil and filter (or every Change engine oil and filter (or every 12 months, whichever occurs first). 12 months, whichever occurs first). An Emission Control Service.
Page 404 Long Tripmighway Maintenance Schedule 30,000 Miles (50 000 km) 37,500 Miles (62 500 km) Change engine oil and filter (or every Change engine oil and filter (or every 12 months, whichever occurs first). 12 months, whichever occurs first). An Emission Control Service. An Emission Control Service.
Page 405 Long Tripmighway Maintenance Schedule 50,000 Miles (83 000 km) Change engine oil and filter (or every Change automatic transaxle fluid and filter if the vehicle is mainly driven under one or 12 months, whichever occurs first). more of these conditions: An Emission Control Sewice.
Page 406 Long TripEIighway Maintenance Schedule 52,500 Miles (87 500 km) In hilly or mountainous terrain. Change engine oil and filter (or every 12 months, whichever occurs first). When doing frequent trailer towing. An Emission Control Service. Uses such as found in taxi, police or Rotate tires.
Page 407 Long TripFighway Maintenance Schedule 60,000 Miles (100 000 km) Change engine oil and filter (or every Replace air cleaner filter. 12 months, whichever occurs first). An Emission Control Service. An Emission Control Service. Inspect fuel tank, cap and lines for damage or leaks.
Page 408 67,500 Miles (112 500 km) 75,000 Miles (125 000 km) Change engine oil and filter (or every Change engine oil and filter (or every 12 months, whichever occurs first). 12 months, whichever occurs first). An Emission Control Service. An Emission Control Service. Rotate tires.
Page 409 ‘ m g Tripklighway Maintenance Schedule 82,500 Miles (137 500 km) 90,000 Miles (150 000 km) Change engine oil and filter (or every Change engine oil and filter (or every 12 months, whichever occurs first). 12 months, whichever occurs first). An Emission Control Service.
Page 410 Long Tripmighway Maintenance Schedule 97,500 Miles (162 500 km) 100,000 Miles (166 000 km) Change engine oil and filter (or every Inspect spark plug wires. 12 months, whichever occurs first). An Emission Control Service. An Emission Control Service. Replace spark plugs. Rotate tires.
Page 411 Long Tripmighway Maintenance Schedule 150,000 Miles (240 000 km) 100,000 MiZes (I66 000 km) (Continued) - In hilly or mountainous terrain. Drain, flush and refill cooling system (or every 60 months since last service, When doing frequent trailer towing. whichever occurs first). See “Engine - Uses such as found in taxi, police or Coolant”...
Page 412 Part B: Owner Checks and Services Engine Coolant Level Check Check the engine coolant level and add DEX-COOL@ Listed below are owner checks and services which coolant mixture if necessary. See “Engine Coolant’’ in should be performed at the intervals specified to help the Index for further details.
Page 413 At Least Twice a Year Automatic Transaxle Check Check the transaxle fluid level; add if needed. S e e Restraint System Check “Automatic Transaxle” in the Index. A fluid loss may Make sure the safety belt reminder light and all your indicate a problem.
Page 414 Starter Switch Check Brake-Transaxle Shift Interlock (BTSI) Check CAUTION: CAUTION: When you are doing this check, the vehicle could When you are doing this check, the vehicle could move suddenly. If it does, you or others could be move suddenly. If it does, you or others could be injured.
Page 415 Ignition Transaxle Lock Check Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular brake, set the While parked, and with the parking brake set, try to turn parking brake. the ignition key to LOCK in each shift lever position. To check the parking brake’s holding ability: With The key should turn to LOCK only when the shift the engine running and transaxle in NEUTRAL (N),...
Page 416 Part C: Periodic Maintenance missing or out-of-position parts as well as open seams, holes, loose connections or other conditions which could Inspections cause a heat build-up in the floor pan or could let Listed below are inspections and services which should exhaust fumes into the vehicle.
Page 417 Part D: Recommended Fluids USAGE FLUIDLUBRICANT and Lubricants Coolant GM Part No. 3634621 or Supplement equivalent with a complete flush NOTE: Fluids and lubricants identified below by name, and refill. Sealer part number or specification may be obtained from your GM dealer.
Page 418 USAGE FLUIDLUBRICANT USAGE FLUIDLUBRICANT Key Lock Multi-Pu ose lubricant, Hood and Door Multi-pu ose lubricant, Cylinders Superlube (GM Part Hinges, Rear Superlube (GM Part No. 12346241 or equivalent). Folding Seat, No. 12346241 or equivalent). Fuel Door Hinge, Chassis Chassis lubricant (GM Part Liftgate Hinges, Lubrication No.
Page 419 Part E: Maintenance Record Any additional information from “Owner Checks and Services” or “Periodic Maintenance” can be added on After the scheduled services are performed, record the the following record pages. Also, you should retain all date, odometer reading and who performed the service maintenance receipts.
Page 420 Maintenance Record SERVICED BY 7-45...
Page 421 Maintenance Record ODOMETER SERVICED READING DATE MAINTENANCE PERFORMED 7-46...
Page 422 Section 8 Customer Assistance Information Here you will find out how to contact Chevrolet if you need assistance. This section also tells you how to obtain service publications and how to report any safety defects. Customer Satisfaction Procedure 8- 10...
Page 423 Customer Satisfaction Procedure Chevrolet dealers have the facilities, trained technicians and up-to-date information to promptly address any concerns you may have. However, if a concern has not been resolved to your complete satisfaction, take the following steps: STEP ONE Discuss your concern with a member of dealership management.
Page 424 In the Dominican Republic: 1-800-75 1-4 135 cannot be resolved by the dealership without further (English) or 1-800-75 1-4 136 (Spanish) help, contact the Chevrolet Customer Assistance In the Bahamas: 1-800-389-0009 Center by calling 1-800-222- 1020. In Canada, contact GM of Canada Customer Communication...
Page 425 Nature of concern speech-impaired and who use Text Telephones (TTYs), Chevrolet has TTY equipment available at its Customer We encourage you to call us so we can give your inquiry Assistance Center. Any TTY user can communicate with prompt attention.
Page 426 To enhance Chevrolet's strong commitment to customer satisfaction, Chevrolet is excited to announce the establishment of the Chevrolet/Geo Roadside Assistance Center. As the owner of a 1997 Chevrolet/Geo, membership in Roadside Assistance is free.
Page 427 FREE Non-Warranty Towing (to the closest dealer New Vehicle Limited Warranty to eligible purchasers from a legal roadway) of 1997 Chevrolet/Geo passenger car and light duty trucks. (Please see your selling dealer for details.) FREE LocksmithKey Service (when keys are lost...
Page 428 For complete program details, see your Chevrolet/Geo Please refer to the Roadside Assistance brochure dealer to obtain a Roadside Assistance Center brochure. inside your owner information portfolio for full program details. The Roadside Assistance Center uses companies that will provide you with quality and priority service. When...
Page 429 (please see your selling dealer for details). rent vehicles to people under 21 years of age. If you are Courtesy Transportation includes: under 21 and have difficulty renting a vehicle, Chevrolet One way shuttle ride for any warranty repair will reimburse up to $30/day for documented completed during the same day.
Page 430 BBB AUTO LINE Both Chevrolet and your Chevrolet dealer are committed Council of Better Business Bureaus, Inc. to making sure you are completely satisfied with your new 4200 Wilson Boulevard vehicle.
Page 431 General Motors. or in the courts. For further information, contact the BBB at 1-800-955-5 100 or the Chevrolet Customer To contact NHTSA, you may either call the Auto Safety Assistance Center at 1-800-222- 1020.
Page 432 In addition to notifying NHTSA (or Transport Canada) in a situation like this, we certainly hope you’ll notify us. I ase call us at 1-800-222- 1020 or write: Chevrolet Motor Division Chevrolet Customer Assistance Center P.O. Box 7047 Troy, Michigan 48007-7047...
Page 433 1997 CHEVROLET/GEO SERVICE PUBLICATIONS ORDERING INFORMATION The following publications covering the operation and servicing of your vehicle can be purchased by filling out the Service Publication Order Form in this book and mailing it in with your check, money order, or credit card information to Helm, lncorporated (address below.)
Page 434 TOTAL MATERIAL NOTE: Dealers and Companies please provide dealer or company name, and also the Check or Money name of the person to whose attention the shipment should be sent. Order payabb to Michiclan Purchasers Mail completed order form to: Helm, Inc.
Page 435 NOTES 8-14...
Page 436 Section 9 Index ........2.89. 4. 7 Accessory Power Outlet 2-78 Anti-Lock Brake System Warning Light ........Appearancecare 6-48 Adding Equipment to the Outside Of Your Vehicle .......
Page 438 Whattouse 6-22 ..........Inside of Your Chevrolet 6-48 Courtesy Transportation ............. .
Page 444 Rear Replacement ................AirVents Bulbs 6-64...
Page 446 4-11 Servicing Your Air Bag-Equipped Chevrolet ........
Page 449 Service Station Information WINDSHIELD WASHER FLUID P6-26 TIRES P6-41 REMOTE BATTERY P5-5 SECONDARY HOOD RELEASE P6-9 ENGINE COOLANT HOOD FUEL RECOVERY TANK RELEASE DOOR P6-23 P6-8 P6-5 For detailed information, refer to the page number listed, or see the index in the back of the owner’s manual. 9-14...

Chevrolet VENTURE 1997 Manual

Quick Links

Related Manuals for Chevrolet VENTURE 1997

Summary of Contents for Chevrolet VENTURE 1997

Table of Contents