Remote Alarm; Remote Power Sliding Door Operation - Chevrolet VENTURE 2005 Owner's Manual

When you use your remote keyless entry transmitter to
unlock your vehicle or to operate the power sliding
door(s), the parking lamps will flash to let you know the
command was received.
If you would like to change the way the parking lamps
operate with remote unlock confirmation, see Vehicle
Personalization on page 2-55.
LOCK: To lock all doors, press LOCK on the remote
keyless entry transmitter. See Power Door Locks
on page 2-10 for more details on the power door lock
features. With the content theft-deterrent system,
the LOCK button may arm the system. See Content
Theft-Deterrent on page 2-25 for more details.
When you use the remote keyless entry transmitter to
lock your vehicle, the parking lamps will flash to let you
know the command has been received. If you press
the LOCK button again, within five seconds, the horn will
sound and the parking lamps will flash to let you
know the vehicle is already locked.
If you would like to change the way the parking lamps
and horn operate with remote lock confirmation,
see Vehicle Personalization on page 2-55.
2-6

Remote Alarm

When you press the horn button on the remote keyless
entry transmitter, the parking lamps will flash and the
horn will sound. This will allow you to attract attention,
if needed.
Press this button again to stop the alarm from sounding.

Remote Power Sliding Door Operation

If your vehicle has the power sliding door, your remote
keyless entry transmitter will have a button that has a van
symbol on it. Press it to open or close the sliding door.
See Power Sliding Door (PSD) on page 2-15.
If your vehicle has the dual power sliding doors, your
remote keyless entry transmitter will have two buttons
that have a van symbol on them. The van symbol on the
left is for the driver's side sliding door and the van
symbol on the right is for the passenger's side sliding
door. See Power Sliding Door (PSD) on page 2-15.
If the power sliding door(s) is locked, first unlock
all doors, then press the van symbol to open the power
sliding door(s). The parking lamps will flash when
the right button with the van symbol is pressed and they
will not flash when the left button with the van symbol
is pressed. Press the van symbol again to close
the sliding door(s). See Power Sliding Door (PSD) on
page 2-15 for more information.