Table of Contents
Advertisement
T
e
s
t
i
n
g
t
h
e
T
e
s
t
i
n
g
t
h
e
The following test procedure checks to see if the scanner is properly functioning
with your computer and the scanning software. Before testing your scanner, double
check to make sure that all connections are securely fastened.
To properly test your scanner, please perform the following steps:
1. Open the scanner's document cover and place a picture onto the scanner glass
headfirst and face-down.
Document Cover
Front of Scanner
2. Gently close the document cover.
3. Next, open the scanner's image-editing program. Click on the Windows
START button and then PROGRAMS, PLUSTEK USB SCANNER,
PRESTO! IMAGEFOLIO, and then PRESTO! IMAGEFOLIO.
4. When Presto! ImageFolio opens, click on FILE and then SELECT TWAIN
SOURCE. In the window that opens, choose PLUSTEK USB SCANNER.
Click on the SELECT button to close the window. This procedure allows
Presto! ImageFolio to gain access to the scanner.
5. Within Presto! ImageFolio, click on FILE, ACQUIRE and then choose
ACQUIRE.
6. The Plustek USB Scanner (TWAIN) window will open.
7. CLOSE the Guided Scan window and click the SCAN button.
8. If an image appears on your screen, your scanner is working properly.
If an image appears on your screen, your scanner is working properly. To learn
how to manipulate the image, please read the Chapter II. The Scanner Software
section of the Scanner Software User's Guide.
S
c
a
n
n
e
r
S
c
a
n
n
e
r
Removable
Place document
facedown to center
11
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
