Table of Contents
Advertisement
1. Plug the power adapter into the scanner's power receptor which can be
identified by the symbol
2. Plug the other end of the power adapter into a standard AC power outlet.
3. Plug the square end of the included USB cable to the USB port at the rear of
the scanner. You can find a USB sign
the rear of the scanner.
4. Plug the rectangular end of the USB cable to the USB port on the back of
your computer.
Note: If there is another USB device connected to the computer, connect the
scanner to an available USB port.
5. If you plan to connect your scanner to a USB hub
connected to the USB port in your computer. Next, connect the scanner to
the USB hub.
Note: If you do not have a USB port available, you might need to buy a USB
port.
S
t
e
p
2
.
I
n
s
t
S
t
e
p
2
.
I
n
s
t
1. If the USB components on your computer are functioning correctly, they will
automatically detect the scanner causing the "Add New Hardware Wizard" or
"Found New Hardware Wizard" to be launched.
2. For Windows 98/Me
a. Click on the NEXT button when the "Add New Hardware Wizard"
window is displayed.
b. Select "SEARCH FOR THE BEST DRIVER FOR YOUR DEVICE
[RECOMMENDED]" and click on the NEXT button.
c. The next window will ask you where to search to find the drive. Select
"CD-ROM drive", and deselect "Floppy disk drives" if it is checked.
d. Insert the Setup/Application CD-ROM, included with your scanner, into
your CD-ROM drive and then click on the NEXT button.
e. The next window will display the location of the USBSCAN.INF file.
Click on the NEXT button.
3. For Windows 2000/XP
a. Insert the Setup/Application CD-ROM, included with your scanner, into
your CD-ROM drive.
b. Select
4
The USB hub is not included with the scanner.
a
l
l
i
n
g
t
h
e
S
o
a
l
l
i
n
g
t
h
e
S
o
"INSTALL
THE
on its top.
beside the USB connector at
4
, make sure that the hub is
f
t
w
a
r
e
f
t
w
a
r
e
SOFTWARE
7
AUTOMATICALLY
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
