Table of Contents
Advertisement
b. Click on the Yes button if the User Account Control dialog pops up.
Afterwards, please skip to procedure 5.
4. For Windows 8 / 10 / 11:
a. Insert the Setup/Application DVD-ROM, included with your scanner, into your
DVD-ROM drive. Click on the pop-up notification, then click Run install.exe in
the pop-up window. If you miss the pop-up notification, please eject and re-
insert the Setup/Application DVD-ROM.
b. Click on the Yes button if the User Account Control dialog pops up.
Afterwards, please skip to procedure 5.
5. Follow the on-screen instructions to install all software that your new scanner
requires. If the pop-up wizard window appears click Next, and click Install this
driver software anyway in the Windows Security window then click Finish in the
wizard window.
6. After the installation is complete, close all open applications and click the Finish
button to restart your computer.
Attention
Step 3. Install the Stacker
Insert the tabs on the stacker onto their slots on the scanner.
Information
Step 4. Testing the Scanner
The following describes how you can check if the scanner is properly functioning
with your computer and the scanning software. Before testing your scanner, double
check to make sure that all connections are securely fastened.
Save the Setup/Application DVD in case you
need to reinstall the driver and software in the
future.
The installation of stacker is optional, if you have
limited desktop space.
10
Advertisement
Table of Contents
