Chapter 21 Menu 1 General Setup; General Setup; Procedure To Configure Menu 1; Figure 21-1 Menu 1 General Setup - ZyXEL Communications P-660H-61 User Manual

Menu 1 - General Setup contains administrative and system-related information.

21.1 General Setup

Menu 1 — General Setup contains administrative and system-related information (shown next). The
System Name field is for identification purposes. However, because some ISPs check this name you
should enter your computer's "Computer Name".
♦
In Windows 95/98 click Start, Settings, Control Panel, Network. Click the Identification
tab, note the entry for the Computer name field and enter it as the Prestige System Name.
♦
In Windows 2000 click Start, Settings, Control Panel and then double-click System. Click
the Network Identification tab and then the Properties button. Note the entry for the
Computer name field and enter it as the Prestige System Name.
♦ In Windows XP, click start, My Computer, View system information and then click the
Computer Name tab. Note the entry in the Full computer name field and enter it as the
Prestige System Name.
The Domain Name entry is what is propagated to the DHCP clients on the LAN. If you leave this
blank, the domain name obtained by DHCP from the ISP is used. While you must enter the host name
(System Name) on each individual computer, the domain name can be assigned from the Prestige via
DHCP.

21.2 Procedure To Configure Menu 1

Enter 1 in the Main Menu to open Menu 1 — General Setup (shown next).
System Name= ?
Location=
Contact Person's Name=
Domain Name=
Edit Dynamic DNS= No
Route IP= Yes
Bridge= No
Press ENTER to Confirm or ESC to Cancel:
Fill in the required fields. Refer to the table shown next for more information about these fields.
Menu 1 General Setup
Menu 1 General Setup
Menu 1 - General Setup

Figure 21-1 Menu 1 General Setup

Prestige 660H Series User's Guide
Chapter 21
21-1