Figure 12-3 Firewall Rules Summary: First Screen; Table 12-1 Firewall Rules Summary: First Screen - ZyXEL Communications P-660H-61 User Manual

Prestige 660H Series User's Guide
The following table describes the labels in this screen.
LABEL
The default action for
packets not matching
following rules
Default Permit Log
The following fields summarize the rules you have created. Note that these fields are read only. Click the tab at
the top of the box to order the rules according to that tab.
No.
Source IP
Destination IP
Service
Action
12-4

Figure 12-3 Firewall Rules Summary: First Screen

Table 12-1 Firewall Rules Summary: First Screen

Use the drop-down list box to select whether to Block (silently discard) or Forward
(allow the passage of) packets that do not match the following rules.
Select this check box to log all matched rules in the default set.
This is your firewall rule number. The ordering of your rules is important as rules are
applied in turn. The Move field below allows you to reorder your rules. Click a rule's
number to edit the rule.
This is the source address of the packet. Please note that a blank source or destination
address is equivalent to Any.
This is the destination address of the packet. Please note that a blank source or
destination address is equivalent to Any.
This is the service to which the rule applies. See Table 12-2 for more information.
This is the specified action for that rule, whether to Block (discard) or Forward (allow
the passage of) packets.
DESCRIPTION
Creating Custom Rules