Table of Contents
Advertisement
volume. All other features of the base and all cordless handsets will not
function.
#
While the power is out, the base uses a special ringer; you cannot adjust
the volume of this ringer.
USING THE ANSWERING SYSTEM
Answering System Options
You can change the answering system options from any station. Just open the
menu and select
Menu Option
Security Code
Ring Time
Record Time
Message Alert
Ans. Language
Call Screen
Answer On/Off
Record Greeting
Greeting Options
Accessing the Answering System
With the phone in standby, you can access your system from the base or
remotely from any handset. Only 1 handset or the base can access the system at
a time.
During remote access;
The system beeps so you know it's waiting for your next command.
You can press the number key shown next to each command instead of
scrolling through the screens.
Answering
Setup.
What it does
Enter a 2-digit PIN so you can access your answering system
from any touch-tone phone (see page 24).
Set the number of rings (2, 4, or 6) before the system answers
(see p. 21 about
Set the amount of time
message. Choose
to let callers leave a message. The maximum record time is
12.5 minutes total.
Have the base beep every 15 seconds when you have a new
message. The alert stops after you listen to all your new
messages or if you press any key on the base.
Change the language of the system's voice prompts.
Turn on the call screen feature so you can hear callers as they
leave messages on the base speaker (see page 24).
Turn your answering system on or off. (To turn your system
on or off from the base, just press ON/OFF .)
Record an outgoing message (see p. 19)
Switch greetings or delete your greeting (see p. 19).
(Answering
Setup)
Toll
Saver).
(1
or
4
minutes) callers can leave a
Announce Only
if you don't want the system
21 - English
Hide quick links:
Advertisement
Table of Contents
