Table of Contents
Advertisement
Disconnecting the
Last Person
That You Called
More About
Conference Calls
Setting the Volume
Use the Conference Drop feature to disconnect the last person that you
add to a conference call. This feature is helpful if, when you add a party,
your call is answered by someone else.
Only the person who added the last caller to the conference call can
drop that caller.
On a 3Com Entry Telephone or a telephone that does not have a button
programmed for Conference Drop:
1 Press Feature + 431.
2 The system returns you to the others who are in the conference call.
To place your part of a conference call on hold, press and release the
hook switch. The other parties can talk among themselves, but they
cannot hear you. Music on hold does not play when a conference call
is on hold.
To transfer a conference call to another telephone, press and release
the hook switch. Dial the number to which you want to transfer the
call, announce to the recipient (optionally) that you are transferring a
conference call, and then hang up.
All of the conferenced parties are transferred except yourself.
Your ability to drop the last person that you added to the
conference is transferred to the person who accepts the transfer.
On any 3Com Telephone, use the Volume Control buttons to raise or
lower one of these volumes:
Ring Volume — To raise or lower the volume of the ring, press the up
or down Volume Control button repeatedly while your telephone is
ringing, until the volume is at the level that you prefer. To read how
ringer volume is different from ringer tone, see
Chapter
5.
Handset Volume — To raise or lower the volume of the dial tone or
the sound that you hear when you are using the handset, pick up the
handset and then press the up or down Volume Control button
repeatedly until the volume is at the level that you prefer. You can
change the handset volume during a conversation or by listening to
the dial tone.
Setting the Volume
"Ringer Tones"
in
47
Advertisement
Table of Contents
