Cd Player - Skoda RADIO NAVIGATION SYSTEM CRUISE - FOR OCTAVIA Manual

CD player

Inserting the CD
– Press the button . If a CD has already been inserted, the play func-
CD
tion begins at the point where the last play function was interrupted.
– Carefully insert a CD into the CD case
drawn in. The play function begins automatically.
A
Function keys:
A
−
- changes over to a connected CD changer*. This function is not
CHANGER
available on vehicles without CD changer;
−
– Random play function; the tracks will be played in a random order;
MIX
−
- Scroll through the CD;
SCAN
A
Number of the played CD;
B
A
Number of the played track;
C
A
Display of the running time;
D
A
Display that the set station is a traffic information station;
E
A
Number of the played track;
F
A
Display that the set station is a TMC station (Traffic-Message-Channel).
G
Fig. 4 Main menu CD,
A
second CD of a connected
B
A
CD player is played.
A
A
until it is automatically
7
Operating the CD player
Select track
– Press the button or during the play function of the CD, in order
 
to select the previous and/or the next title.
– Hold the or pressed for fast running.
 
Replay the tracks in random order
MIX
– Press on the function key
MIX
Function SCAN
– Press the function key
SCAN
first 10 seconds of each title are played.
If the unit cannot read an inserted CD, this is shown in the display with the notice
CD fault.
General information for MP3 operation
Requirements for the MP3 data and data carrier
•
650 MB and 700 MB CD-ROM, CD-R, CD-RW.
•
The CDs must correspond to the ISO 9660 Level 2 standard as well as the Joliet
data system (single and multi-session).
•
Data names must be no longer than 64 characters.
•
The list structure is restricted to a depth of 8 list levels.
•
The name of the artist, the album and the title of the reproduced MP3 data can
be shown as ID3 tag, providing this information is available. The list and data name
will be displayed if there is no ID3 tag.
Radio
.
in order to scroll through the CD. The
9