Navigation Settings - Skoda RADIO NAVIGATION SYSTEM CRUISE - FOR OCTAVIA Manual

12 Navigation
The route will be recalculated if you leave or disregard the route that was originally
calculated. This process takes only a few seconds.
The last voice response can be repeated by pressing the button
of a navigation recommendation can be changed whilst it is being made.
If the text Off Road appears on the display, it means you are located on a non-digi-
talised street, e.°g. on a farm track. The GPS satellites will not be able to reach the
aerial once you are in a tunnel or underground garage. The unit will orientate itself
via the wheel sensors. If you try to carry out a route calculation in this situation, you
may hear the message: "You are located on a non-digitalised road". Drive on until
the display Off Road disappears.

Navigation settings

– Press the button NAV and then the button
– The desired setup of the navigation can be selected and confirmed
A
using the button .
1
You can select the following settings:
Spoken information
On - you will obtain acoustic driving recommendations for the route during the
route guidance.
Off - the acoustic driving recommendations are switched off during a route guid-
ance.
Auto - the acoustic driving recommendations are switched off during a phone
conversation. The route is only displayed.
Demo mode
If the demo mode is switched on, a route guidance can be started via the naviga-
tion. Then the unit simulates the journey from the accepted location to the entered
destination. First of all you can enter manually the location for a journey demon-
stration.
Time display
Driving time - displays the estimated driving time until the time of arrival at the
destination or at the next stopover destination.
INFO . The volume
Arrival - displays the clock until the estimated time of arrival or the next stopover
destination is reached.
Deleting last destinations
erase individually - opens the list of the last destinations whenever you select
manually the destination to be deleted.
erase all - erases all the last destinations after further confirmation.
Delete tours
erase individually - opens the list of the stored tours whenever you select manu-
ally the tour to be deleted.
SETUP .
erase all - erases all the stored tours after further confirmation.
Tyre change
While driven distances are measured by the navigation system via the turning of the
wheels, the changed tyre sizes affect the accuracy of the navigation e.°g during the
announcement of the navigation recommendations. If you select tyre calibration,
the navigation adapts to the changed tyre size.
Enter your location manually
The navigation system will need some time for an exact definition of your position
if you have transported your vehicle using the train or a ferry. Your position can be
entered manually if the automatic definition is not successful.