Skoda RADIO NAVIGATION SYSTEM CRUISE - FOR OCTAVIA Manual page 9

Store station
Store station
– Press the button RADIO .
– Select the station you wish to store.
– Press the function key
STORE
– Select the first menu point store ... station where the current station
is displayed instead of the points.
A
– Turn the button to select a free memory space or to replace a
1
stored station. If you directly press the button
suggested.
– Confirm the indicated position by pressing the button
Update the complete station list
– Press the function key
STORE
– Select update station list using the button
A
– Press the button . The following message is indicated: Station list
1
is updated ...
A
– Press the button for early interruption.
1
Delete memory list
– Press the button and then the button
RADIO
– Select the menu point delete memory list.
– Confirm the following safety interrogation by pressing
the station finally from the memory list.
The unit switches back apparently into the radio main menu after 5°seconds if you
have stored a station in the memory list or selected a station from the memory list.
You are however still in the menu "memory list". The entry STORE is further high-
in order to call up the station list.
A
, a memory space is
1
A
.
1
and then the function key
SCAN
A
.
1
.
SETUP
to remove
Yes
lighted in black and only the stations which have already been stored in the
memory list can be selected with the buttons
tional station and store it in the memory list, you must change over into the station
list with the function key
You can store 18 stations in the FM range and 12°stations in the AM range.
Note
Press the function key
Calling up a stored station
Selecting a radio station from the station list
– Press the button
– Press the button
buttons and
 
is automatically updated. You can also update it during operation.
.
RDS functions
RDS ("Radio Data System") serves to transmit program identification and additional
services therefore also enabling automatic tracking of stations.
In the event of sufficiently satisfactory reception the suitable RDS radio stations will
display the station name instead of the station frequency.
If a radio station sends additional information via the RDS function while a station
is being stored, it can occur that the name of the radio station is later displayed
incorrectly in the memory list.
Changing station name
You can manually adapt the station name.
Select a stored station and wait until its correct name is shown in the display and
A
then press the button
and . In order to select an addi-
 
STORE or select a new station via
in order to leave the menu.
STORE
and then the button
RADIO STORE
A
in order to select the desired station. Use the
1
to change over to other stations. The list of stations
.
1
Radio 7
SCAN or MANUAL .
.