Skoda RADIO NAVIGATION SYSTEM CRUISE - FOR OCTAVIA Manual page 7

Hide thumbs Also See for RADIO NAVIGATION SYSTEM CRUISE - FOR OCTAVIA:
Table of Contents

Advertisement

Mark and select menu point
A
– Turn the button
until the desired menu point is highlighted with an
1
⇒ page 4, fig. 2
upper and lower line
A
– Press the button
to select the menu point.
1
Set value
A
– Turn the button
until the desired value is set.
1
A
– Press the button
in order to confirm the set value.
1
⇒ page 4, fig. 2
A
The "scroll bar"
shows that further menu points become visible
B
if the sliding regulator is moved completely to the bottom.
Square brackets mean that the function is currently not available (e. g. [Fader] on
vehicles without rear loudspeakers).
An entry with a
opens an additional sub-menu.
A
next to an entry shows the presently selected set-up (e.°g currently played
station).
Some functions can only be switched on or off. A filled out box behind an entry
means that the function is switched on, an "empty" box means that it is switched
off.
System Setups
Press the button
and select the function key
SETUP
You can select between the following parameters:
Menu language - Menu language for the displays and the language messages.
Measuring unit - determining if the distances are displayed in miles or kilom-
eters.
Time setting - manual time setting. Normally the navigation unit takes over the
time from the instrument cluster of the vehicle.
Factory setting - Factory setting.
A
.
A
.
SYSTEM
Display Settings
- Set display brightness.
BRIGHTNESS
- Switching off the display. Press the function key or any unit button
DISPLAY OFF
for switching on again.
Audio settings
– Press the button
and set the desired value using the aid of the
A
button
.
1
You can select between the following parameters:
Balance - Setting of the volume ratio between the left and right side;
Fader* - Setting of the volume ratio between the front and the rear;
Treble - Treble setting;
Midtone* - Midtone setting;
Bass - Bass setting;
Volume settings - individual volume settings for different audio sources.
Volume settings
Traffic announcement - Volume of the incoming traffic announcements;
Navigation volume - Volume of the navigation announcements;
Phone volume* - Volume of the mobile phone calls;
Switch on volume - Volume after switching on;
GALA - Speed dependent volume adaptation. The radio increases automati-
cally its volume with the increasing vehicle speed.
Radio
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents