Table of Contents
Advertisement
LOG SENSE
Byte Offset
0 – 4
Result Message (see Diagnostic Clause)
5
Unused
6 – 9
Time-stamp (number of 1 minute increments since power-on)
When the log page becomes full, no more entries will be added until the log is cleared (using one of the methods
described previously) or a reset occurs. The current cumulative values will be returned regardless of the page
control field in the LOG SENSE CDB.
6.6.6. Tape Log Page (Sony Unique)
This page is a Sony unique page which provides information on the tape currently being used. This log cannot be
cleared and has the following format:
Bit
7
Byte
0
Reserved
1
2
(MSB)
3
4
(MSB)
5
6
DU(0)
7
8
3+m
This page is used to return Tape Log information to the host in a format which conforms to the LOG SENSE
command page format.
Supported Parameter Codes in this page are listed below along with their meanings:
SONY AIT-1 Turbo drive SDX-450V series Ver.1.0
Table 6-17: Error Event format
Table 6-20: Tape Log Page
6
5
DS(1)
TSD(0)
ETC(0)
Parameter Length (m)
Meaning
4
3
Page Code (30h)
Reserved
Page Length (58h)
Parameter Code
TMC (00)
Parameter Value
6.Command Specification
2
1
0
(LSB)
Reserved
LP(0)
6-19
Advertisement
Table of Contents
