Procedure For Writing User Data On Mic Using Log Select; Command - Freecom TAPEWARE AIT-450I Manual

13.Appendix F
Start
Log Sense Page 3Dh
Parameter Code 0003h
(Available Free Byte Count)
Log Select Page 3Eh Parameter
Code 0001h
Log Sense Page 3Dh
Parameter Code 0003h
Log Select Page 3Eh
Parameter Code 0002h
Log Sense Page 3Dh
Parameter Code 0003h
Log Select Page 3Eh Parameter
Code 0003h
Log Select Page 3Dh
Parameter Code 0003h

13.8.1.1. Procedure for Writing User Data on MIC using LOG SELECT

Command

Please refer the Chapter 13.8.1." How to create User Notes."
Note: Header length is differ from User Volume Note ( 10 byte) and User Partition Note ( 8 byte).
As for the chart of 13.8.1., detailed explanation on parameter code 0001h issue for Log Select Page 3Eh is as
follows. This will acquire 380 byte User Volume Note. Commands are as follows.
13-4
⇓
Check MIC free memory capacity, because larger MIC will be
released in the future.
⇓
Create User Volume Note.
⇓
Check MIC free memory capacity.
⇓
Create User Partition Note for partition 1.
⇓
Check MIC free memory capacity.
⇓
Create User Partition Note for partition 0.
⇓
Check MIC free memory capacity.
⇓
Stop
SONY AIT-1 Turbo drive SDX-450V series Ver.1.0