Freecom TAPEWARE AIT-450I Manual page 151

SPACE
Spacing Event
Detected
Blocks File-mark
Set-mark
EOD
BOT
Phy EOT
File-marks Set-mark
EOD
BOT
Phy.EOT
Set-marks EOD
BOT
Phy.EOT
EOD BOT
Phy.EOT
Note a: The logical position is located on the EOM side of the mark if movement was in the forward direction and on
the BOM side of the mark if movement was in the reverse direction.
Note b: The Information field is set to the difference (residue) between the requested count and the actual number of
blocks, file marks, Set-marks, or spaced over.
Note c: The Information field will contain no residue count and therefore the Valid bit is not set.
SONY AIT-1 Turbo drive SDX-450V series Ver.1.0
Table 6-77: SPACE CHECK CONDITION results
Valid Mark EOM
1 1 0
1 1 0
1 0 0
1 0 1
1 0 1
1 1 0
1 0 0
1 0 1
1 0 1
1 0 0
1 0 1
1 0 1
0 0 1
0 0 1
6.Command Specification
Sense Data
Sense Key ASC/ASCQ
No Sense File-mark Detected
No Sense Set-mark Detected
Blank Check
No Sense BOM/P Detected
Medium Error EOM/P Detected
No Sense Set-mark Detected
Blank Check
No Sense BOM/P Detected
Medium Error EOM/P Detected
Blank Check
No Sense BOM/P Detected
Medium Error EOM/P Detected
No Sense BOM/P Detected
Medium Error EOM/P Detected
Note
a,b
a,b,d
b,e
b,f
b,g
a,b,d
b,e
b,f
b,g
b,e
b,f
b,g
c,f
c,g
6-97