Table of Contents
Advertisement
15. Appendix H
(2) Append Partition (Only AIT native mode)
It is an append partition operation (mode select with Append Partition page 32h) which only uses tape beyond
the EOD.
Mode Sense (Page 11h)
Can I create one more new
partition?|
Log Sense
(Page 3Dh; Code 0016h)
Mode Sense (Page 10h)
Mode Select (Page 10h)
Mode Select Page 32h
15-4
IF((Max Additional Partitions)>=1 &
Max Additional Partitions >Additional Partition Defined)
Check the Last partition No.
N=Last Partition No.
Go to the Last partition
CAP=1, Active Partition=N,
All other bits and bytes are the same as returned with Mode Sense Page 10.
Append partition
SONY AIT-1 Turbo drive SDX-450V series Ver.1.0
Advertisement
Table of Contents
