Performance Specification; Data Capacity - Freecom TAPEWARE AIT-450I Manual

2.Specification
10 10

2.3. Performance Specification

The data capacity, data transfer rate and data reliability specifications this chapter require the media to conform to
the AIT-E Turbo, AIT-1 Turbo and AIT-1 Media Specification and also require the drive and media to remain within
their respective operating and non-operating environmental specifications. The specifications below also assume
that the C3 ECC frame is generated on writing and used as necessary on reading, and further assumes that
read-after-write rewrites are used as necessary on writing.

Data Capacity

2.3.1.
The SDX-450V includes a data compression capability. When data compression is enabled the drive capacity can
increase from 2 times to 3 times. The efficiency of the data compression depends on the actual data that is being
compressed and cannot be predicted precisely prior to compression.
Format AIT-E Turbo Standard Format
Native
20.0 Gbyte typical
Capacity
Format AIT-1 Standard Format
25.0 Gbyte typical
Native
Capacity
35.0 Gbyte typical
Format AIT-1 Turbo Standard Format
Native
40.0 Gbyte typical
Capacity
2-6
10
Figure 2-4: Mounting Attitude and Tolerance
When using 98 meter tape AIT-E Turbo cassette (TAITE-20N)
When using 170 meter tape AIT-1 cassette (SDX-T3N and SDX1-25C)
When using 230 meter tape AIT-1 cassette (SDX1-35C)
When using 186 meter tape AIT-1 Turbo cassette (TAIT1-40N and
TAIT1-40C)
10
SONY AIT-1 Turbo drive SDX-450V series Ver.1.0
10 10
10
10