Freecom TAPEWARE AIT-450I Manual page 133

REPORT DENSITY SUPPORT
12 (MSB)
15
16 (MSB)
23
24 (MSB)
31
32 (MSB)
51
52
53
54
WRTOK (1)
55
56
57 (MSB)
59
60 (MSB)
61
62 (MSB)
63
64 (MSB)
67
68 (MSB)
75
76 (MSB)
83
84 (MSB)
103
104
105
106
WRTOK (1)
107
108
109 (MSB)
111
112 (MSB)
113
114 (MSB)
115
116 (MSB)
119
120 (MSB)
127
128 (MSB)
133
134 (MSB)
153
Density support data blocks shall be returned by ascending primary density code values.
Primary Density Code : This field contains the value returned by a Mode Sense command for the density described
in the remainder of the density support block. The drive shall accept a Mode Select command containing this value,
for appropriate media. The value of 00h shall only be used for the default of the logical unit.
SONY AIT-1 Turbo drive SDX-450V series Ver.1.0
ASSIGNING ORGANIZATION (SONY)
DENSITY NAME (AIT-1)
DESCRIPTION (Advanced Intelligent Tape 1)
PRIMARY DENSITY CODE ( 38h )
SECONDARY DENSITY CODE (30h)
DUP (0) DEFLT (1)
BITS PER MM (00 19 AF h)
MEDIA WIDTH (00 50 h)
ASSIGNING ORGANIZATION (SONY)
DENSITY NAME (VAIT)
DESCRIPTION (ValueAdvIntlTape)
PRIMARY DENSITY CODE (39h)
SECONDARY DENSITY CODE (30h)
DUP (0) DEFLT (1)
BITS PER MM (00 19 AF h)
MEDIA WIDTH (00 50 h)
ASSIGNING ORGANIZATION (SONY)
DENSITY NAME (VAIT-1)
DESCRIPTION (ValueAdvIntlTape1)
CAPACITY
Reserved (00h)
Reserved (00h)
Reserved (00h)
TRACKS (00 01 h)
CAPACITY
Reserved (00h)
Reserved (00h)
Reserved (00h)
TRACKS (00 01 h)
CAPACITY
6.Command Specification
(LSB)
(LSB)
(LSB)
(LSB)
(LSB)
(LSB)
(LSB)
(LSB)
(LSB)
(LSB)
(LSB)
(LSB)
(LSB)
(LSB)
(LSB)
(LSB)
(LSB)
(LSB)
6-79