Fsb & Memory Config; Fsb - Memory Clock Mode - EVGA 730i - nForce Motherboard - ATX User Manual

change the FSB memory, and memory timing, go to the FSB & Memory
screen.
FSB & Memory Config
Select
FSB & Memory Config
press to display the FSB & Memory Config menu. This menu provides
Enter
the means to set FSB memory, and memory timing.
Parameters
CPU Freq, MHz
CPU Multiplier
FSB – Memory Clock Mode
x FSB – menory Ratio
x FSB (QDR), MHz
Actual FSB (QDR), MHz
x MEM (DDR), MHz
Actual MEM (DDR), MHz
Memory Timing Setting
:Move Enter:Select
F5:Previous Values
Figure 5.

FSB - Memory Clock Mode

Use the
Page Up
Memory Clock Mode options. The options are:
from the Frequency/Voltage Control menu and
Phoenix – AwardBIOS CMOS Setup Utility
FSB & Memory Config
Settings Current Value
3000.0
9X
[Auto]
Auto
Auto
1333.3
Auto
800.0
[Press Enter]
+/-/PU/PD:Value
F6:Fail-Safe Defaults
FSB & Memory Config Menu
and keys to scroll through the FSB and
Page Down
Configuring the BIOS
Item Help
3000.0
9X Main Level
"Auto" realizes the
1333.3 complete optimized
memory settings
800.0
Optimized memory
settings by allowing
X% CPU overclocking
CPU overclocking may
require manual
overvoltaging of the
CPU to improve system
stability
F10:Save ESC:Exit F1:General Help
F7:Optimized Defaults
EVGA
57