Fsb & Memory Config - EVGA nForce 122-CK-NF68-XX User Manual

Installing and Configuring the EVGA nForce 680i SLI Motherboard
FSB & Memory Config
Select
FSB & Memory Config
press to display the FSB & Memory Config menu. This menu provides
Enter
the means to set SLI-Ready memory, FSB memory, and memory timing.
Parameters
SLI-Ready Memory
CPU Freq, MHz
CPU Multiplier
FSB – Memory Clock Mode
x FSB (QDR), MHz
Actual FSB (QDR), MHz
x MEM (DDR), MHz
Actual MEM (DDR), MHz
Memory Timing Setting
:Move Enter:Select
Figure 10. FSB & Memory Config Menu
SLI-Ready Memory
Use the Page Up
Memory options. The options are:
Disabled
CPUOC 0%
CPUOC 1%
CPUOC 2%
CPUOC 3%
CPUOC 4%
CPUOC 5%
CPUOC MAX
46
from the Advanced Chipset Features menu and
Phoenix – AwardBIOS CMOS Setup Utility
FSB & Memory Config
Settings Current Value
[Disabled] Disabled
2933.3 2933.3
11X 11X
[Auto]
Auto 1066.7
1066.7
Auto 800.6
800.0
[Press Enter]
+/-/PU/PD:Value F10:Save
F5: Previous Values
and Page Down keys to scroll through the SLI-Ready
Item Help
Main Level
"CPUOC MAX" realizes
the complete optimized
memory settings when
SLI-Ready memory is
installed
Optimized memory
settings by allowing
X% CPU overclocking
CPU overclocking may
require manual
overvolting of the CPU
to improve system
stability
ESC:Exit F1:General Help
F7:Defaults