Onboard Devices; Legacy Devices - EVGA 730i - nForce Motherboard - ATX User Manual

SATA SALP Features
This item allows you select the SATA SALP (Aggressive Link Power
Management) status. The options are OFF, Partial, Slumber.
JMB363 ATA Controller
This function allows you to enable SATA controllers by JMicron JMB363
supported. The options are Enabled and Disabled.
JMB363 Mode
This is allows you set the Serial SATA mode by JMicron JMB363. The
options are RAID, IDE and AHCI.

Onboard Devices

Press to display the Onboard Devices menu.
Enter
HD Audio
MAC Lan
P80 Show CPU Temperature
HD Audio
This item allows you to enable or disable the hard disk audio function.
Options are Disabled, Internal Codec, External Codec, INT Codec + EXT
Codec
MAC Lan
Use this function to set the MAC LAN to
P80 Show CPU Temperature
When this function is enabled the Post Port LED will display the CPU's
current temperature. Options are Enabled and Disabled.

Legacy Devices

Press to display the Legacy Devices menu.
Enter
Onboard FDC Controller
Onboard Serial Port 1
[INT Codec + EXT Codec]
[Auto]
[Enabled]
or disable this function.
[Auto]
[Enabled]
[3F8/IRQ4]
Configuring the BIOS
EVGA
45